Compact installations of I/O modules
Field signals and process power connections
Connections to ModuleBus and I/O modules
Mechanical keying prevents insertion of the wrong module
Latching device to DIN rail
DIN rail mounting
Input a.c. 100-240 V or d.c
110-150 V. Output
d.c. 24 V 20A
If redundant power application
is required connect to SS8XX voting unit
DIN rail mounted
G2 compliant
8 channels
The modules can be used in
both single and redundant applications
Interface for NAMUR, 12 V and
24 V transducer signal levels
Each channel can be configured for
pulse count or frequency measurement
The inputs can also be read as DI signals
Pulse count by accumulation in a 16 bit counter
Frequency (speed) measurement 0.5 Hz - 20 kHz
Advanced on-board diagnostics
Input impedance:2.5 kΩ
Maximum field cable length:200 meters (218 yards)
Rated insulation voltage:50 V
Dielectric test voltage:500 V a.c.
Power dissipation:2.5 W
Current consumption +5 V Modulebus:120 mA
NAMUR inputs
G3 compliant
Output status indicators
state upon error detection
Intrinsic Safety support
Short-circuit protection to ground and 30 V
8 channels with process voltage supervision
OSP sets outputs to predetermined
Over-voltage and over-temperature protection
3BSC690087R1
DISCONTINUED BY MANUFACTURER
INPUT MODULE
ANALOG
8 CHANNEL
4-20 MA
W/ INTRINSIC SAFETY INTERFACE
HART
(AO895)
Tariff Code: 85389091
Country of Origin: Singapore
Input/Output Type: Analog Output
Output Voltage:Typically 0-10 V DC or 4-20 mA
Channels:Typically 8 channels
Output Range:4-20 mA or 0-10 V
Output Accuracy:±0.1% of full scale
Power Supply:24 V DC
Power Consumption:Typically < 12 W
8 channels for 0...20 mA
4...20 mA, 0...5 V or 1...5 V d.c
single ended unipolar inputs
1 group of 8 channels isolated from ground
12 Bit resolution
Current limited transmitter supply per channel
HART pass-through communication
Input Voltage Range: 18–32 VDC
Output Voltage: 24 VDC
Input Current: Rated for up to 20 A
Efficiency: ≥ 95%
Operating Temperature Range: -25°C to +70°C
Storage Temperature Range: -40°C to +85°C
Humidity: 5% to 95% RH (non-condensing)
3BSE050199R1
DISCONTINUED BY MANUFACTURER
REDUNDANT PROCESSOR UNIT
PM866K02
CONTAINS: 2 PCS PM866K01/TK850 CEX-BUS EXPANSION CABLE/TK851 RCU-LINK CABLE/NO LICENSE INCLUDED
THIS PART IS NOT ROHS 2 2011/65/EU COMPLIANT
Processor type MPC860
applications per controller 32
programs per application 64
diagrams per application 128
tasks per controller 32
Number of different cycle times 32
Cycle time per application programs Down to 1 ms
Flash PROM for firmware storage 2 MB
Power supply 24 V DC (19.2-30 V d.c.)
Power consumption +24 V typ/max 180 / 300 mA
Power dissipation 4.32 W (7.2 W max)
Model Number: IH581/B
Trackball Diameter: 55mm (2.2")
Interface: USB 2.0 (Type B connector)
Power Supply: 5V DC (via USB bus power)
Current Consumption: <100mA
Operating Voltage Range: 4.75-5.25V DC
ESD Protection: ±15kV
Resolution: 800-1600 dpi
Number of Channels: 16 channels
High Level (ON): 15–30 V DC
Low Level (OFF): 0–5 V DC
Input Current: ~2–5 mA
Channel-to-Channel: 500 V AC
Field-to-System: 1500 V AC
Digital Input/Output Module
Input Channels: 16 digital inputs
Output Channels: 16 digital outputs
Input Voltage Range: 24 V DC
Output Voltage Range: 24 V DC
Current Rating: 0.5 A per channel
Communication Interface:
Supports industry-standard protocols such as
Profibus, Modbus, and Ethernet
Operating Temperature Range: -25°C to +70°C
Storage Temperature Range: -40°C to +85°C
Enclosure Rating: IP20
Function:4 AI: U, I
Analog Inputs:4
Resolution:Analog Input 12 bit
Connection Type:Pluggable
Degree of Protection:Housing IP20
Ambient Air Temperature:
Operation 0 ... +60 °C
Storage -40 ... +70 °C
Function:32 DI: 24VDC
Number of Digital Inputs:32
Number of Digital Configurable I/Os:0
Input Voltage Type:DC
Input Current:5 mA
Maximum Input Voltage:0 ... 30 V
Delay Time (τ):0.1 … 32 ms
Degree of Protection:IP20
Supply Voltage:20.4 … 28.8 V DC
Type: Terminal Base
Product ID: 1SAP112100R0170
Number of Slots: 2
Communication Interfaces:Ethernet TCP/IP
2 Serial interfaces (RS232/RS485) for CPU communication and programming
Operating Voltage: 24 VDC
Operating Temperature: 0°C to +60°C
Storage Temperature: -40°C to +70°C
Weight: 0.35 kg
Mounting: DIN rail and panel mounting
Certifications: CE, C-Tick, KCC, and others
Supply Voltage:24V DC ±10%
Power Consumption:≤15 W
Isolation :500V AC (I/O to logic)
Processor:32-bit DSP
Memory:4 MB Flash
Digital: 6x 24V DC inputs
Analog: 2x ±10V/0–20mA inputs
Local Bus Power:12.6 VDC at 15 A
AmbientTemperature:-40°C to +70°C
Shock :10g ½ Sinewave for 11msec
Vibration:1mm Peak to Peak from 2 to 13.2Hz;
0.7g from 13.2 to 150Hz
AirborneContaminantsISA-S71.04 –1985
AirborneContaminants Class G3
Relative Humidity 5 to 95% Non-Condensing
51195066100
DISCONTINUED BY MANUFACTURER
POWER SUPPLY
5SLOT CHASSIS
2 INPUTS
120V AT 6.0AMP
240V AT 3.75AMP
47-63HZ
4 OUTPUTS
5VDC AT 30AMP
+12VDC AT 8AMP
-12VDC AT 1AMP
+24VDC AT 1AMP
SPBRC410
DISCONTINUED BY MANUFACTURER
BRIDGE CONTROLLER
HARMONY RACK / SYMPHONY PLUS
W/ MODBUS TCP INTERFACE
INFI90 / BRC410 / SPBRC41000000
Tariff Code: 8537109160
Country of Origin: United States
Space requirements: 4 TE, 3 HE (= 4 HP, 3U)
Number of output channels: 8
Output specification: 24 V DC
Maximum current: 550 mA
Maximum lamp load: 120 mA (2.9 W)
Voltage drop: < 2.0 V DC at 500 mA
WDG input current: 8 mA
Off current: < 0.1 mA
AAB841S00
DISCONTINUED BY MANUFACTURER
INPUT / OUTPUT MODULE
ANALOG
8-CHANNEL INPUT / 8-CHANNEL OUTPUT
NON-ISOLATED
1-5 V INPUT SIGNAL
4-20 MA OUTPUT SIGNAL
MIL 40-PIN
