Supply Voltage:24V DC (±10%)
Power Consumption:15W (typical)
Isolation :1500V AC
Processor:32-bit DSP
Processor:32-bit DSP
Memory:64MB Flash
Digital Inputs:24V DC
Digital Outputs:Relay, 5A
Analog Inputs:0-10V/4-20mA
Number of Channels:16
Input Voltage Range:24-250V DC/AC
Threshold Voltage:18V DC
Input Current:2-5mA @ 24V DC
Isolation:2kV AC
Power Consumption:3W (max)
5.7-inch color TFT LCD
320 x 240 pixels
Input Voltage:24 V DC ±15%
Power Consumption:≤15 W (typical)
Operating Temperature:0°C to +50°C
Storage Temperature:-40°C to +70°C
Humidity:≤95% RH (non-condensing)
330103 3300 XL 8 mm Probe
M10 x 1 thread,without armor
Minimum unthreaded length: 0 mm
Minimum case length: 120 mm
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector
standard cable
Data Transfer Rate: Up to 2.5 Mbps Dimensions: Standard 6U card size for easy installation in GE control system racks. Power Requirements: Logic Power: +5V DC. Auxiliary Power: 3.3V DC or as specified by the system. Power Consumption: <10W (typical). Connector: Multi-pin slot connectors compatible
Supply Voltage:24V DC (±10%)
Power Consumption:20W (max)
Isolation:1500V AC
Digital Inputs:24V DC
Analog Inputs:0-10V/4-20mA,
Processor:Dual-core 32-bit DSP
Control Cycle:25µs (torque control)
Memory:128MB Flash
Processor:Dual 32-bit PowerPC @ 400MHz
Control Cycle:50ms (typical)
Memory:256MB DDR3 RAM
Supply Voltage:24V DC (±10%)
Power Consumption:25W (typical)
Isolation:1500V AC
Supply Voltage:24V DC (±10%)
Power Consumption:18W (typical)
Isolation:1500V AC
Analog Inputs:4-20mA
Digital Inputs:24V DC
Control Accuracy:±0.1% of span
Response Time:<50ms (10-90% step change)
Control Modes:Speed, Load, Pressure
Control Resolution:24-bit
Loop Update Time:250µs
Speed Control Accuracy:±0.01% of setpoint
Torque Control Accuracy:±0.5% of rated torque
Analog Inputs:±10V/4-20mA
Digital Inputs:24V DC
Input Voltage:24V DC (±15%)
Power Consumption:25W (typical)
Processor:Triple 32-bit
Memory:512MB DDR3 RAM
Control Loops:Up to 128 PID loops
Input Voltage:24V DC (±15%) or 120V AC
Power Consumption:35W (typical)
Isolation:2.5kV AC
Power Supply:24V DC (±10%)
Power Consumption:8W (typical), 12W (max)
Isolation:1.5kV AC
ESD Protection:±8kV
Port Configuration:4x RJ45
Data Rate:10/100/1000Mbps
Latency:<50µs per hop
Jitter:<10µs
Protocol Support:PROFIBUS DP-V1
Data Rate:9.6kbps - 12Mbps
Max Stations:125 devices per channel
Process Data:244 bytes
Diagnostic Data:96 bytes per device
Power Supply:5V DC via backplane (±5%)
Power Consumption:2.5W (typical)
Isolation:1500V AC (field-to-logic)
ESD Protection:±8kV
AC Input: 85–264V AC
DC Input: 100–300V DC
Output Voltage: 24V DC
Output Current: 0.5A (500mA)
Power Rating: ~12W
Efficiency: ≥85%
Inrush Current: <20A
Isolation Voltage: 3 kV AC
AC Input: 85–264V AC
DC Input: 100–300V DC
Input Current: 0.2A @ 115V AC
Frequency Range: 47–63 Hz
Output Voltage: 5V DC
Ripple & Noise: <50mV peak-to-peak
Isolation Voltage: 3 kV AC
AC Input: 85–264V AC
DC Input: 100–300V DC
Input Current: 0.15A @ 115V AC
Frequency Range: 47–63 Hz
Output Voltage: 15V DC
Power Rating: 5W
Efficiency: ≥80% (typical)
Inrush Current: <10A
Isolation Voltage: 3 kV AC
Series: Mark V LM
Product Type: Digital I/O Board
Power Requirements: +5 V dc, 6 A
Number of relay channels: 12
Power supply voltage: 28 V dc
Mounting: DIN-rail mounting
Technology: Surface mount
Operating temperature: -30 to +65°C
