ALL MANUFACTURERS

KJ3002X1-BF1 RTD Input Module

RTD MODULE
OHMS FINAL ASSEMBLY
W/ SHIELD
8WIDE
160MA
12VDC
RTD CARD

Trusted 40 Channel Analogue Input

40 input channels per FTA.
Industry standard field device connections (2-wire).
Standard DIN rail compatibility.
Simple installation and connection.
24 Vdc operation.
SmartSlot connection for ‘one to many’ hot replacement of input modules.
Fused field power supply per channel.
On-board Light Emitting Diode (LED) indication of field power supply integrity.

Control Board

Supply Voltage:24-250V DC
Power Consumption:6W (typical)
Analog Inputs:12x (16-bit, ±10V/4-20mA)
Digital I/O:24x (24V DC, opto-isolated)
Isolation :3000V AC (I/O to logic)
Memory: 512MB DDR3 

3300 XL 8 mm Proximity Probes

330104  3300 XL 8 mm Probe
M10 x 1 thread,with armor
Minimum unthreaded length: 0 mm
Minimum case length: 20 mm
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector
standard cable
05 CSA, ATEX, IECEx  Approvals

Velomitor XA Piezo-velocity Sensor

Sensitivity:3.94mV/mm/s (100 mV/in/s)±5%
Velocity Range:1270 mm/s (50 in/s) peak
Transverse Sensitivity:Less than 5% of sensitivity
Amplitude Linearity:±2% to 152 mm/s (6 in/s) peak
BroadbandNoise Floor:0.004 mm/s (160 min/s) rms,nominal.
PowerRequirements:
DC Voltage: -22 to -30 VDC
Bias Current: 2.5 to 6.0 mA
Output BiasVoltage:-12 ± 3.0 VDC, 
Over Temperature Referenced toPin A

Upgrade Kit

178850-00Upgrade Kit
Non-approved
Voltage:±12V to ±24V DC
Signal Integrity: Maintains API 670 
Operating Temp: –30°C to +65°C (–22°F to +149°F)
Humidity: 0–95% non-condensing

Dual Probe Transducer

Standard Range: 0–500 mils
Extended Options: Up to 1000 mils 
Sensitivity:200 mV/mil (7.87 V/mm) ±5% per channel
Voltage Output: –2 V to –18 V DC
Current Output (Optional): 4–20 mA
Linearity:±1% of full scale
Power Supply:–18 V to –24 V DC

VELOMITOR CABLE

VELOMITOR CABLE
4METER
XA INTERCONNECT VARIETY

Guardmaster 440C-CR30 safety relay

Guardmaster MSR126.1T Safety Relay

Control Board

PC BOARD
RESISTIVE NETWORK
STATUS LED INDICATORS
6 TRANSFORMERS
YXU-170E

MEMORY BOARD

MEMORY BOARD
CIRCUIT BOARD
RESISTIVE NETWORK
YPR-104B

PC BOARD

PC BOARD
PULSE TRANSFORMER UNIT
CONTROL UNIT
YXU-173E

CIRCUIT BOARD

Memory 512MB DDR3
PWM Resolution 15-bit
Analog Inputs:8x (16-bit SAR ADC)
Digital I/O:16x (24V DC opto)
Encoder Interfaces:1x (A/B/Z + SSI)
Isolation Voltage:2500Vrms
Fieldbus:PROFIBUS DP-V1 (12Mbps)
Ethernet:10/100BASE-TX

Control Board

Memory:1GB DDR3
Digital Inputs:32x (24V DC, opto-isolated)
Analog Inputs:8x (16-bit, ±10V/4-20mA)
Communication:Ports 2x RS-485, 1x Ethernet (10/100/1000)
Redundant Power Inputs :24V DC ±20%

Control Board

Memory:256MB Flash
Control Loop Speed:<50μs
Analog Inputs:8x (16-bit, ±10V/4-20mA)
Digital I/O:16x (24V DC, opto-isolated)
Encoder Interfaces:2x (A/B/Z + SSI)
Isolation Voltage:2500V AC (field to logic)

Relay Assembly

RELAY ASSEMBLY
DIRECT AND DOUBLE ACTING
DVC

KJ3002X1-BA1 Analog Input Module

ControlNet adapter module

Supply Voltage:24V DC (±10%)
Power Consumption:5W (typical)
Isolation:1500V AC
Protocol :ControlNet 
Data Rate:5Mbps
Max Nodes:99 per network
Max Cable Length:1000m 

PROFIBUS Redundancy Link Module

Supply Voltage:24V DC (±10%)
Power Consumption:3W (typical)
Isolation :1500V AC
Protocol:PROFIBUS DP-V1
Data Rate:9.6kbps
Max Nodes:32 per segment

3300 Proximitor Sensor

Product type : 3300 Proximitor Sensor
Total Length Option : 50 = 5.0 metres (16.4 feet)
Agency Approval Option : 03 = Multiple Approvals
Proximitor® Sensor Material : A383 aluminum.
Operating Temperature : -51°C to +100°C (-60°F to +212°F)
Storage Temperature : -51°C to +100°C (-60°F to +212°F)

TP 177B PN/DP Touch Panel

Transformer Protection

Supply Voltage:24V DC (±10%)
Power Consumption:3W (typical)
Isolation :1500V AC
Protocol:PROFIBUS DP-V1
Data Rate:9.6kbps
Max Nodes:32 per segment

Transformer Protection

Rated Current:1A or 5A
Voltage Inputs:100-240V AC
Burden:<0.2VA (current)
Current (0.1-40In):±0.5%
Voltage:±0.2%
Frequency:±0.01Hz
Operating range: 1.05-1.4 pu V/Hz

Control Card

Operating Voltage: 24V DC 
Power Consumption: < 5W
Analog I/O (if applicable):0-10V, 4-20mA

Analog Input Board

Input Channels:16 
Input Types:4-20mA
Resolution:16-bit (0.0015% FS)
Accuracy:±0.1% FS
Update Rate:100ms (all channels)
Isolation Voltage:1500V AC
Overvoltage:30V continuous
Surge Protection:4kV 

Stratix 5700 10 Port Managed Switch

LV AC industrial wall-mounted single drive

3AUA0000090441
ACS880-01-096A-5 
PN: 55 kW, IN: 96 A
LV AC industrial wall-mounted single drive
IEC: Pn 55 kW, 96 A, 500 V
UL: Pld 75 Hp, 96 A, 460 V

LV AC industrial wall-mounted single drive

ACS880-01-040A-5
3ABD00037851-D
Type Designation:ACS880-01-040A-5
LV AC industrial wall-mounted single drive 
IEC: Pn 22 kW, 40 A (ACS880-01-040A-5)
PN: 22KW, IN: 40A

LV AC industrial wall-mounted single drive

ACS880-01-04A8-5
3AUA0000090430
LV AC industrial wall-mounted single drive
IEC: Pn 2.2 kW, 4.8 A, 500 V
UL: Pld 3 Hp, 4.8 A, 460 V
PN: 2.2 kW, IN: 4.8 A
 (ACS880-01-04A8-5)

LV AC industrial wall-mounted single drive

ACS880-01-021A-5
3AUA0000090435
LV AC industrial wall-mounted single drive 
IEC: Pn 11 kW, 21 A, 500 V
UL: Pld 15 Hp, 21 A, 460 V 
PN: 11.0 kW, IN: 21 A
(ACS880-01-021A-5)

3300 35mm Series Proximitor

Continuous, Online Monitoring
Temperature, Pressure, and Overspeed Detection
Vibration and Position Monitoring
Designed for Machine Protection
Versatile, Expandable, and Cost-Effective

Condition Monitoring Board

Dynamic range: 0–10 kHz
Filters: High-pass
Power Supply:+24V DC (±10%), 2A typical
Input Voltage Range:±50V (protected inputs)
A/D Resolution:16-bit (typical)
Sampling Rate:Up to 100 kS/s (per channel)

PC BOARD ASSEMBLY

Main Processor:216MHz
Memory:512MB DDR3
A/D Conversion:16-bit, 1μs sampling
Analog Inputs:12x (±10V/4-20mA, 16-bit)
Digital I/O:24x (24V DC, opto-isolated)
Communication Ports 2x RS-485