ABB

Expansion module

Number of Inputs:16
Input Voltage:24-250V DC
Input Current :2-10mA per channel
Isolation:2.5kV RMS 
Number of Outputs:8
Contact Rating:5A @ 250V AC / 30V DC

CONTROL BOARD

3-phase: 380-480V AC (±10%)
DC link: 510-720V DC
Output Voltages:+24V DC (±1%)
Efficiency: >92% at full load
Isolation: 2500V AC

Control board

Voltage: 48-250V DC
Frequency: 50/60Hz (±10%)
Power Consumption: 15W typical
Memory: 256MB Flash
Sampling Rate: 4kHz
Binary Inputs: 16 
Binary Outputs: 8 

Communication adapter

Ethernet connector
Fibre optic SPA-bus connectors
Auxiliary power supply connector
SPA TX and RX LEDs
LAN and diagnostic LEDs

Ethernet Adapter

Ethernet connector
LON/SPA bus FO connector (optional)
LON/SPA Rx LED4. LON/LAN service pin
LAN and diagnostic LEDs

Servo Drive

Input Voltage:3-phase 200-480V AC (±10%)
Frequency:50/60Hz (±5%)
Power Range:3.0kW 
Peak Current :18A 
Output Current:6A RMS
Switching Frequency:8kHz (PWM)

Power Supply Unit

DC Output Voltage:24V DC (±1%)
Output Current:40A (continuous)
Power Rating:960W (max)
Efficiency:>90% (at full load)
Input Voltage:3-phase 200-480V AC (±10%)
Frequency:50/60Hz (±5%)
Input Current :10A (max @ 400V AC)
Inrush Current:30A (peak, for 10ms)

Main computer assembly

RAM:4GB DDR3
Storage:32GB SSD 
Input Voltage:24V DC (±10%)
Power Consumption:50W (typical)
Ethernet:10/100/1000 Mbps

Drive board

Input Voltage: 24 VDC (±10%)
Analog Inputs: 0–10 VDC or 4–20 mA
Operating Temperature: -25°C to +55°C (-13°F to +131°F).
Humidity: Up to 95% non-condensing.
Vibration Resistance: 5–150 Hz

Circuit Board

Power Supply: Typically 24 V DC
Input Voltage Range: typically 0-10V DC 
Operating Temperature Range: 
Typically -20°C to 70°C (-4°F to 158°F)
Storage Temperature Range: 
Typically -40°C to 85°C (-40°F to 185°F)
Humidity:  5% to 95%, non-condensing

F-series Extension Adapter

Voltage: 24V DC (±10%)
Consumption: 2.5W typical
Isolation: 1.5kV AC 
PROFIBUS DP (up to 12Mbps)
Modbus RTU (RS485)
CANopen (optional)

Frequency Converter

Frequency (f):47.5 ... 63 Hz
Frame Size:R3
Input Voltage (Uin):380 … 480 V
Mounting Type:Wall-mounted_NO UNIT$
Output Current, Normal Use (In):45 A
Output Current, Heavy-Duty Use (IHD):38 A
Output Power, Normal Use (Pn):22 kW
Output Power, Heavy-Duty Use (PHD):18.5 kW

Manual Motor Starter

Setting Range:28 ... 40 A
Rated Operational Current:40 A
Rated Insulation Voltage:690 V
Electrical Durability:25000 cycle
Ampere Rating UL/CSA:40 A
Rated Operational Power AC-3 (Pe) :hree Phase 18.5 kW
Maximum Operating Voltage UL/CSA Main Circuit:600 V AC

Interface board

Voltage: 24V DC
Consumption: 3.5W typical
Isolation: 1.5kV AC
PROFIBUS DP (up to 12Mbps)
Modbus RTU (RS485)
Node Capacity: Up to 124 devices
IEC 60870-5-101/104

Drive Control Uni

Power Supply:24V DC (±10%)
Power Consumption:5W (typical)
Isolation:1.5kV AC
Data Transfer Rate:Up to 12Mbps 
Fieldbus Protocols:PROFIBUS DP
DRIVE-CLiQ:For direct drive connection

Drive Control Unit

Processor: 32-bit dual-core ARM Cortex
Clock Speed: 800MHz
Memory: 512MB Flash
Power Supply:24V DC (±15%)
Power Consumption:8W (typical)
Isolation Voltage:2.5kV AC
I/O Capacity:16 DI/8 DO

Controller Circuit Board

Input Voltage: 24V DC (±10%)
Power Consumption: 15W typical
Isolation: 4kV AC
Processor: 32-bit PowerPC @ 400MHz
Memory:64MB SDRAM

Control I/O Module

Digital Inputs:24V DC
Analog Inputs:0-10V/4-20mA
Input Isolation:2.5kV AC
Backplane Bus:Proprietary high-speed bus
Protocol Support:Modbus RTU, PROFIBUS DP 

Control Circuit Board

Power Supply:24V DC (±10%)
Power Consumption:8W (typical)
Processor:32-bit ARM Cortex-M7 @ 400MHz
Memory:64MB Flash, 32MB RAM
Cycle Time:≤100μs
Digital I/O:24V DC
Analog Inputs:0-10V/4-20mA

CM30 Controller

Output Type:Analogue Relay
Supply Voltage:100 → 240 V ac
Number of Outputs:3
Control Type:ON/OFF
Communication Module Available:Yes
Display Type:LCD, Multi Line, TFT
IP Rating:IP66
Range:ControlMaster CM30
Additional Functionality:ON/OFF
Series:CM30
Panel Depth:121mm
Display Colour:Green, Red, Yellow

Servo Drive

Voltage: 3-phase 200-480V AC (±10%)
Frequency: 50/60Hz (±5%)
Power Range: 2.3kW to 7.5kW
Output Current: 6A to 18A RMS
Control Method: Field-Oriented Control 
Control Bandwidth: 1.5kHz
Speed Range: 0-6000 RPM
Positioning Accuracy: ±1 encoder count

AXIS Drive Unit

Input Voltage:3-phase 200-480V AC (±10%)
Frequency:50/60Hz (±5%)
Power Range:3.0kW 
Peak Current :18A 
Output Current:6A RMS
Switching Frequency:8kHz (PWM)

IGBT module

Collector-Emitter Voltage (Vces): 1700V
Gate-Emitter Voltage (Vges): ±20V
Turn-on Time (ton): 0.5μs (typical)
Turn-off Time (toff): 1.2μs (typical)
Switching Frequency: Up to 20kHz 
Power Dissipation: 1800W (max)
DC Link Voltage: 1000-1200V DC
Typical Applications:400-690V AC drives

Controller with Expanded Memory

Processor:32-bit ARM
Base Memory:512MB DDR4 RAM
Expanded Memory:2GB Flash
Execution Speed:0.05ms/1k instructions
I/O Scan Time:≤1ms (for 1000 I/O points)
Task Capacity:32 concurrent tasks
Digital I/O:Up to 2048 points
Analog I/O:Up to 512 channels
Input Voltage:24V DC (±15%) or 100-240V AC
Power Consumption:15W (typical)

Scanner head

Scanner head,
IR sensor.
3/4in threade
Power Supply: 24V DC (±10%)
Power Consumption: 50W (typical)
Wavelength Range: 900-1100nm
Spot Diameter: 0.2-3.0mm (adjustable)
Focal Length: 150-450mm (motorized adjustment)
Scanning Angle: ±30° (optical)
Positioning Accuracy: ±0.01°

COMMUNICATION BOARD

PROFIBUS DP:9-pin D-sub, 12Mbps max
Modbus RTU:RS485 (terminal block)
Power Supply:24V DC (±10%), sourced from drive
Power Consumption:3W (typical)
Isolation :1.5kV AC (fieldbus to drive)
Signal Levels :RS485: ±15V differential

35 AA 92 Analog Output Module

Operating Voltage:24V DC (±10%)
Power Consumption:2.5W (typical)
Number of Channels:4 
Output Type:0-20mA
Resolution:16-bit 
Load Impedance:≤600Ω
Isolation:1.5kV AC 

35 ZE 94 CPU Processor Board

Input Voltage:24V DC (±15%)
Power Consumption:25W (typical)
Processor:32-bit PowerPC @ 1.2GHz 
Memory:1GB DDR4 RAM
Flash Storage:8GB eMMC
Execution Speed:0.02ms/1k instructions
I/O Capacity:Supports up to 16,384 I/O points
Task Handling:64 concurrent tasks
Scan Cycle:Configurable 1-100ms

CONTROL CIRCUIT BOARD

Voltage: 24V DC (±10%)
Isolation: 1.5kV AC 
Digital Inputs:24V DC
Relay Outputs:5A
Analog Inputs:0-10V/4-20mA

CIRCUIT BOARD

Input Voltage:24V DC (±10%)
Power Consumption:8W (typical)
Isolation Voltage:4kV AC 
Gate Drive Output:±15V (IGBT control)
Switching Frequency:Up to 2kHz
Supported IGBTs:1700V/3300V modules
Desat Protection:<2μs response time
Short-Circuit Protection:≤10μs trip time

Display Unit

Power Supply:24V DC
Power Consumption:5W max
Isolation:1.5kV AC
Screen Type:TFT LCD with LED backlight
Resolution:320 × 240 pixels (QVGA)
Color Depth:65k colors

I/O Interface Card

Power Supply:24V DC (±10%)
Surge Protection 4kV 
Input Channels:24V DC
Isolation:1.5kV channel-to-channel
Output Channels:4-20mA
Update Rate:10ms per channel
Backplane Interface:800xA CI867 bus
Protocol Support:Modbus RTU/TCP

Governor drive board

Supply Voltage: 24VDC ±10%
Power Consumption: 15W typical
Isolation: 1500VAC I/O to logic
Speed Range:0-12,000 RPM
Resolution:0.01% of rated speed
Analog Inputs:16-bit, ±10V, 4-20mA
Analog Outputs: 12-bit, ±10V
Digital I/O: 16x opto-isolated (24VDC)
Servo Outputs: 4x (PWM, ±50mA)

Central Processing Unit

Supply Voltage: 24VDC (19.2-30V)
Power Consumption: 12W typical
Isolation: 1500VAC 
Program Memory 16MB (user logic)
Process I/O Capacity Up to 250,000 I/O points
Communication Links 16 simultaneous
Task Execution 32 parallel tasks
Dual-Core Processor: 1.2 GHz Power Architecture
Memory: 512MB DDR3 RAM + 1GB Flash

Control Circuit Board

Supply Voltage:24V DC (±10%)
Power Consumption:≤15W 
Analog Inputs:4x 0-10V / 4-20mA, 16-bit ADC
Digital Inputs:8x 24V DC, opto-isolated
Digital Outputs:6x relay / MOSFET, 24V DC @ 2A
Communication:RS-485 Modbus RTU
Processor: 32-bit ARM
Memory: 512KB Flash
PWM Resolution: 12-bit

Circuit Board

Operating Voltage:24V DC (±15%)
Power Consumption:≤8W
Analog Inputs:2x (0-10V / 4-20mA, 12-bit resolution)
Digital Inputs:4x (24V DC, opto-isolated, 3ms debounce)
Relay Outputs:2x (Form C, 5A @ 250V AC)
Isolation Voltage:2000V AC

Control Module

Supply Voltage: 24VDC (19.2-30V)
Power Consumption: 10W typical
Isolation: 1500VAC
Memory: 256MB DDR3 RAM
Processor: Dual-core 800MHz
Program Capacity:8MB user memory
I/O Capacity:Up to 1024 points
Communication:4 simultaneous protocols

Control Circuit Board

Supply Voltage:24VDC ±10%
Power Consumption:6W typical
Analog Inputs:4x (±10V, 16-bit)
Digital Inputs:8x (24VDC, opto)
Relay Outputs:2x (5A/250VAC)
Processor: 32-bit RISC processor 
Memory: 128MB DDR3
Isolation: 2500Vrms

Circuit Board

Processor: 32-bit ARM Cortex-M7 (300 MHz)
Memory: 512KB Flash, 128KB RAM
Control Loop Speed: ≤100µs 
PWM Resolution: 12-bit 
Operating Voltage:24V DC (±10%)
Power Consumption:≤10W (typical)
Analog Inputs:4x (0-10V / 4-20mA, 16-bit ADC)
Digital Inputs:8x (24V DC, opto-isolated, 3ms debounce)
Relay Outputs:2x (Form C, 5A @ 250V AC)
Isolation Voltage:2000V AC

Thermal Overload Relay Module

Rated Current (Ie):0.1-15A (adjustable)
Supply Voltage:24V DC/AC (±15%)
Power Consumption:≤3W
Contact Rating:5A @ 250V AC (Aux. contacts)
Isolation Voltage:2500V AC 
Control Inputs:24V DC

PCB BOARD

Operating Voltage:24V DC ±10%
Power Consumption:8W max
Digital Inputs:6x (24V DC, opto-isolated)
Analog Inputs:2x (0-10V/4-20mA)
Relay Outputs:2x (5A @ 250V AC)
Isolation Voltage:1500V AC
Processor: ARM Cortex-M4 168MHz
Memory: 256KB Flash

Interface Card

Supply Voltage:24V DC (±10%)
Power Consumption:≤5W
Digital Inputs:8x (24V DC, opto-isolated)
Analog Inputs:4x (0-10V / 4-20mA, 12-bit resolution)
Relay Outputs:2x (5A @ 250V AC, Form C)
Isolation Voltage:2500V AC
Processor: 32-bit ARM Cortex-M4 

DC Motor Controller

Input Voltage:3-phase 380-500V AC ±10%
Output Voltage:0-400V DC (armature)
Current Rating:2000A continuous
Field Supply:0-300V DC, 20A
Control Voltage:24V DC ±10%
Speed Regulation: ±0.1% of base speed
Torque Control: ±1% of rated torque
Response Time: <20ms for 90% speed change
Resolution: 16-bit 
Standard: PROFIBUS DP-V1 (12Mbps)
Optional: DeviceNet, Modbus RTU

Field Exciter Board

Field Voltage Output:50-300V DC 
Field Current Rating:Up to 20A 
Control Voltage:24V DC (±10%)
Isolation Voltage:2500V AC
Response Time:<10ms
Analog Inputs: 2x (0-10V/4-20mA) for field ref
Digital Inputs: 3x (24V DC) for enable/disable
Relay Outputs: 2x (5A @ 250V AC) 

Power supply unit

Analog Signal: 0-10V 
Dual Output Voltage – +24V DC
Remote On/Off – 24V DC control input
Input Voltage:3-phase 380-500V AC (45-65Hz)
Output 1 (+24V DC):10A (240W)
Output 2 (+15V DC):5A (75W)
Efficiency:≥92% (at full load)
Ripple Noise:<1% of rated output

THYRISTOR MODULE

Repetitive Blocking Voltage (VDRM):8000V
Average On-State Current (ITAV):1600A @ 85°C
Surge Current (ITSM):40kA (8.3ms half-sine)
Gate Trigger Current (IGT):200mA (max)
High Surge Current – Up to 40kA
Critical dV/dt:1000V/μs

Frequency Converter

Power Range: 157A / 110kW (at 400V)
Input Voltage:3-phase 380-480V AC (±10%), 50/60Hz
Output Current:157A continuous
Overload Capacity:110% for 60s / 150% for 3s
Switching Frequency:1-16kHz (adjustable)
Efficiency:≥97% (at full load)
Analog Inputs: 2x (0-10V / 4-20mA)
Digital Inputs: 6x (24V DC)
Relay Outputs: 2x (5A @ 250V AC)

INTERFACE MODULE

Supply Voltage:24V DC (±10%)
Power Consumption:≤4W
Analog Inputs:4x (0-10V / 4-20mA, 12-bit resolution)
Digital Inputs:8x (24V DC, opto-isolated)
Relay Outputs:2x (Form C, 5A @ 250V AC)
Isolation Voltage:2500V AC

Power Board

Input Voltage:3-phase 380-500V AC (±10%), 45-65Hz
Output 1 (+24V DC):10A (240W)
Output 2 (+15V DC):5A (75W)
Output 3 (-15V DC):2A (30W)
Efficiency:≥94% (at full load)
Overvoltage Protection:+32V DC
Analog Signals:0-10V load sharing output
Remote Control:24V DC input

Power supply board

Wide Input Range: 24-250V D
Dual Isolated Outputs: +24V DC
Input Voltage:24-250V DC or 100-240V AC
Output 1 (+24V DC):2A (48W)
Output 2 (±15V DC):±0.5A (15W total)
Ripple Noise:<1% of rated output
Hold-up Time:≥20ms (at full load)

PCB board

Dual-Core Processing – 800MHz PowerPC
Supply Voltage:24V DC ±10%
Power Consumption:18W
Analog Inputs:16x (16-bit, ±10V/4-20mA)
Digital I/O:32x (24V DC, opto-isolated)
Isolation :2500V AC 
PROFIBUS DP-V1 (12Mbps)
EtherCAT (100Mbps)

POWER SUPPLY BOARD

Dual Output: +24V DC (5A)
Active PFC: >0.95 power factor
Input Voltage:85-264V AC
Output 1 (+24V DC):5A (120W)
Output 2 (+5V DC):2A (10W)
Efficiency:≥92% (at full load)
Ripple Noise:<1% of rated output

Slimline expansion unit

Supply Voltage:24V DC (±15%)
Power Consumption:2W (base unit)
Backplane Current:800mA max
Isolation :1500V AC
Modules per Unit: Up to 8 I/O modules
Digital I/O :16/32 channel
Analog I/O:8/16 channel
Communication:PROFIBUS, Ethernet

Prog.Logic Controller

Memory Size:142 kB
Memory Type User Data:RAM
Controller Processing Time:0.00008 ms
Number of Digital Inputs:8
Number of Digital Outputs:6
Number of Digital Configurable I/Os:0
Input Voltage Type:DC
Rated Voltage (Ur):230 V AC
Supply Voltage:100 … 240 V AC

Prog.Logic Controller

Memory Size:142 kB
Memory Type User Data:RAM
Controller Processing Time:0.00008 ms
Number of Digital Inputs:8
Number of Digital Outputs:6
Number of Digital Configurable I/Os:0
Input Voltage Type:DC
Rated Voltage (Ur):24 V DC
Supply Voltage:20.4 … 28.8 V DC

Voltage:230V AC (±10%), 50/60Hz
Power Consumption:28W (max)
Airflow:140m³/h @ 0Pa
Static Pressure:320Pa (max)
Speed:2800 RPM (±10%)
Connector:4-pin Mate-N-Lok

Control Board

Supply Voltage:24-250V DC
Power Consumption:6W (typical)
Analog Inputs:12x (16-bit, ±10V/4-20mA)
Digital I/O:24x (24V DC, opto-isolated)
Isolation :3000V AC (I/O to logic)
Memory: 512MB DDR3 

Control Board

PC BOARD
RESISTIVE NETWORK
STATUS LED INDICATORS
6 TRANSFORMERS
YXU-170E

MEMORY BOARD

MEMORY BOARD
CIRCUIT BOARD
RESISTIVE NETWORK
YPR-104B

PC BOARD

PC BOARD
PULSE TRANSFORMER UNIT
CONTROL UNIT
YXU-173E

CIRCUIT BOARD

Memory 512MB DDR3
PWM Resolution 15-bit
Analog Inputs:8x (16-bit SAR ADC)
Digital I/O:16x (24V DC opto)
Encoder Interfaces:1x (A/B/Z + SSI)
Isolation Voltage:2500Vrms
Fieldbus:PROFIBUS DP-V1 (12Mbps)
Ethernet:10/100BASE-TX

Control Board

Memory:1GB DDR3
Digital Inputs:32x (24V DC, opto-isolated)
Analog Inputs:8x (16-bit, ±10V/4-20mA)
Communication:Ports 2x RS-485, 1x Ethernet (10/100/1000)
Redundant Power Inputs :24V DC ±20%

Control Board

Memory:256MB Flash
Control Loop Speed:<50μs
Analog Inputs:8x (16-bit, ±10V/4-20mA)
Digital I/O:16x (24V DC, opto-isolated)
Encoder Interfaces:2x (A/B/Z + SSI)
Isolation Voltage:2500V AC (field to logic)

ControlNet adapter module

Supply Voltage:24V DC (±10%)
Power Consumption:5W (typical)
Isolation:1500V AC
Protocol :ControlNet 
Data Rate:5Mbps
Max Nodes:99 per network
Max Cable Length:1000m 

PROFIBUS Redundancy Link Module

Supply Voltage:24V DC (±10%)
Power Consumption:3W (typical)
Isolation :1500V AC
Protocol:PROFIBUS DP-V1
Data Rate:9.6kbps
Max Nodes:32 per segment