ABB are a market leading producer of power & automation technologies that enhance performance and reduce environmental impact for industries worldwide.
Amikon Limited stock and supply ABB motors, drives, programmable logic controllers (PLCs), power electronics and Robot spare parts and Discontinued card parts, motion and obsolete including variable speed drives, DC drives, PLCs and general automation spares.
ABB are a market leading producer of power & automation technologies that enhance performance and reduce environmental impact for industries worldwide.
Amikon Limited stock and supply ABB motors, drives, programmable logic controllers (PLCs), power electronics and Robot spare parts and Discontinued card parts, motion and obsolete including variable speed drives, DC drives, PLCs and general automation spares.
Input Voltage:400-480V AC 3-phase (50/60Hz)
Control Voltage:24V DC ±10%
Main Circuit Breaker:80A (adjustable)
Short Circuit Rating:65kA @ 480V AC
Power Consumption:≤500W
Power Supply:24V DC ±10%
Power Consumption:5W (typical)
Current:4-20mA/0-20mA
Voltage:0-10V/±10V
RTD :Pt100
Sampling Rate:10ms/channel
Common Mode Rejection:>100dB @ 50Hz
Input Impedance:250Ω
Power Supply:24V DC ±10%
Power Consumption:5VA (max)
Isolation:2kV AC (input-to-output)
Voltage Input:0-690V AC
Current Input:0-5A AC (via CTs)
Frequency Range:45-65Hz
Input Impedance:>1MΩ (voltage)
Analog Outputs:2x 4-20mA
Accuracy:±0.5% of span
Load Capacity:≤500Ω
Model: KUC755 AE106
Order/Part Number: 3BHB005243R0106
Description: Gate Power Unit
Input Voltage: Typically 24V DC
Output Gate Drive Voltage: ±15V to ±20V
Output Current: Up to 5A peak
Isolation Voltage: ≥2500V AC
Supply Voltage: 24V DC
Power Consumption: <5W
Part Number: 3BHB006943R0002
Supported Languages: Multiple
Alternative Designation: UNS0885A-Z, V2
Description: Display and control interface board
Input Voltage Range:85–264V AC
Frequency Range: 47–63Hz
Inrush Current: ≤20A
Efficiency: ≥90%
Output Voltage: 24V DC
Output Current: 5A
Power Rating: 120W
Overload Protection: 105–150% of rated current
Low operating cost
Compact design
For SIL2 safety loops
Mechanical position indicator
Well-proven technology and intelligence
Robust and environmentally ruggedized
ATEX, FM, CSA, GOST and IECEx approvals
Wide operating temperature range -40 ... 85 °C
3-phase: 380-500V AC
1-phase: 200-240V AC
Frequency Range: 47-63Hz
DC Bus Voltage: 510-620V DC
Rated Power: 11kW
Overload Capacity: 150% for 60 seconds
Inrush Current Protection: <25A for 10ms
Efficiency: >95%
Undervoltage Lockout: <300V DC input
Input Voltage Range:380-500V AC
Optional: 200-240V AC
Frequency Range: 47–63Hz
Inrush Current Protection: <30A
Output Voltage: 24V DC
Rated Current: 10A
Power Rating: 240W
Ripple Noise: <100mV peak-to-peak
Overload Capacity: 150% for 5 seconds
Supply Voltage: 24V DC ±10%
Power Consumption: 15W typical
Isolation: 2.5kV input-to-output
PWM Frequency: 2-16kHz
Analog Inputs:4 channels
Digital Inputs:8 channels
Power Range: 0.5-800kW
Max Motor Speed: 6000 rpm
Voltage: 5-15V DC
Frequency: Up to 10kHz
Pulse Voltage: 24V DC
Peak Current: 2A
Pulse Width: 60-120μs
Input-to-output: 4kV AC
Channel-to-channel: 2kV AC
Operating Voltage: 220V AC ±15%
Power Consumption: 15W max
Backup Power: Optional 24V DC input
Module Type:High-capacity IGBT Kit
Configuration: Dual-switch structure
Voltage Rating: 3300V/4500V
Current Rating: 1600A-3000A
Switching Speed:<150ns turn-off time
Power Class: ≥5MW
Series: CP-C
Model: 24/20.0
Type: Industrial switching power supply
Power Rating: 480W
Output Voltage: 24V DC ±1%
Input Voltage Range:100-240V AC (47-63Hz)
Inrush Current: <20A
Power Factor: >0.95 at full load
Efficiency: Up to 93%
Voltage: 24 V DC
Power Consumption: ≤ 5 W
Serial Ports: RS-232/RS-485
Ethernet Port: 10/100 Mbp
Fieldbus Support: Profibus DP
Processor: 32-bit RISC-based
Flash Memory: 16 MB
Data Throughput: Up to 10,000 signals
Ethernet: 10/100 Mbps
Serial (RS485): 300–115,200 bps
Input Voltage: 24V DC
Power Consumption: 4W
Isolation: 2.5 kV AC
Processor: 32-bit ARM
Digital Inputs: 24V DC
Supply Voltage: 24V DC (±10%)
Power Consumption: ≤8W
Isolation: 1500V AC
Digital Inputs:24V DC
Analog Inputs:0–10V or 4–20mA
Relay Outputs: 5A, 250V AC
Processor: 32-bit DSP
PWM Frequency: 2–16 kHz
Input Voltage:110/125/250V DC
Range: 88–300V DC
Inrush Current: ≤20A
Output Voltage: 24V DC
Output Current: 5A continuous
Ripple Noise: <100mV peak-to-peak
Isolation: 3kV AC
Overvoltage: Clamping at 28V DC
Processor: 32-bit DSP
PWM Frequency: 2–16 kHz
Operating Voltage: 24V DC (±10%)
Power Consumption: ≤6W
Isolation: 1500V AC
Digital Inputs:24V DC
Analog Inputs:0–10V or 4–20mA
Relay Outputs:5A, 250V AC / 30V DC
Processor: 32-bit DSP
PWM Frequency: 2–16 kHz
Operating Voltage: 24V DC
Power Consumption: ≤5W
Isolation: 1500V AC
Digital Inputs:24V DC
Analog Inputs:0–10V or 4–20mA
Relay Outputs:5A, 250V AC / 30V DC
Operating Voltage:24V DC (±10%)
Power Consumption:≤5W
Isolation:1500V AC
Digital Inputs:24V DC
Analog Inputs:0–10V or 4–20mA
Signal Latency:<1ms (digital I/O)
Analog Accuracy:±0.1% FSR
Encoder Supply:5V DC ±5%, 500mA max
Environmental Noise Immunity:>1500V/m
Voltage: 48-250V DC
Frequency: 50/60Hz (±10%)
Power Consumption: 15W typical
Binary Inputs:24-250V DC
Analog Inputs:4-20mA or ±10V
Relay Outputs:5A, 250V AC/30V DC
Processor: 32-bit dual-core CPU
Sampling Rate: 4kHz
Supply Voltage: 24V DC
Power Consumption: 8W typical
Isolation: 2.5kV AC
Analog Inputs:8 channels
Resolution: 16-bit
Range: ±10V or 4-20mA
Accuracy: ±0.1% of full scale
Digital I/O:16 digital inputs
Sampling Rate: 4kHz per channel
Memory:256MB Flash
Input Voltage:24-250V DC
Number of Outputs:8 independent relays
Contact Type:Form A (SPST-NO)
Contact Rating:5A @ 250V AC / 30V DC
Max Switching Power:1250VA / 150W
Isolation:4kV RMS
