ABB

IGBT module

Collector-Emitter Voltage:1200 V
Gate-Emitter Voltage±20 V (max)
Turn-On Delay Time:80 ns (typical)
IGBT Junction-to-Case:0.08 K/W
Diode Junction-to-Case:0.10 K/W
Operating Junction Temperature:-40°C to +150°C
Storage Temperature:-40°C to +125°C

Motor incl pinion

Rated Power:7.5kW
Rated Torque:48Nm
Rated Speed:1500 rpm
Max Speed:3000 rpm
Rated Current:18A
Voltage:400V AC (3-phase)
Frequency:0-300Hz
Resolution:20-bit

Control Module

Supply Voltage:24V DC (±10%)
Power Consumption:20W (max)
Isolation:1500V AC 
Digital Inputs:24V DC
Analog Inputs:0-10V/4-20mA,
Processor:Dual-core 32-bit DSP
Control Cycle:25µs (torque control)
Memory:128MB Flash

Control Module

Processor:Dual 32-bit PowerPC @ 400MHz
Control Cycle:50ms (typical)
Memory:256MB DDR3 RAM
Supply Voltage:24V DC (±10%)
Power Consumption:25W (typical)
Isolation:1500V AC

Circuit Board

Processor:Dual-core 32-bit DSP
Clock Speed:300 MHz
RAM:256 MB
Flash Memory:128 MB
Operating Voltage:24-250V DC/AC
Power Consumption:12W (typical)
Isolation Voltage:2.5kV AC

DC Governor Module

Supply Voltage:24V DC (±10%)
Power Consumption:18W (typical)
Isolation:1500V AC
Analog Inputs:4-20mA
Digital Inputs:24V DC
Control Accuracy:±0.1% of span
Response Time:<50ms (10-90% step change)
Control Modes:Speed, Load, Pressure

CONTROL UNIT

Control Resolution:24-bit
Loop Update Time:250µs
Speed Control Accuracy:±0.01% of setpoint
Torque Control Accuracy:±0.5% of rated torque
Analog Inputs:±10V/4-20mA
Digital Inputs:24V DC
Input Voltage:24V DC (±15%)
Power Consumption:25W (typical)

Excitation board

Processor:Triple 32-bit 
Memory:512MB DDR3 RAM
Control Loops:Up to 128 PID loops
Input Voltage:24V DC (±15%) or 120V AC
Power Consumption:35W (typical)
Isolation:2.5kV AC

INTERFACE CARD

Power Supply:24V DC (±10%) 
Power Consumption:8W (typical), 12W (max)
Isolation:1.5kV AC 
ESD Protection:±8kV 
Port Configuration:4x RJ45 
Data Rate:10/100/1000Mbps 
Latency:<50µs per hop
Jitter:<10µs

Profibus Interface Sub Module

Protocol Support:PROFIBUS DP-V1
Data Rate:9.6kbps - 12Mbps
Max Stations:125 devices per channel
Process Data:244 bytes 
Diagnostic Data:96 bytes per device
Power Supply:5V DC via backplane (±5%)
Power Consumption:2.5W (typical)
Isolation:1500V AC (field-to-logic)
ESD Protection:±8kV 

Base Unit

Model Number: BP03
Order Code / Part Number: 2VAA008283R101
Rated Voltage (Ue): 24V DC
Insulation Voltage: 250V AC
Rated Frequency: 50/60 Hz

Power Supply Mdule

AC Input: 85–264V AC
DC Input: 100–300V DC
Output Voltage: 24V DC
Output Current: 0.5A (500mA) 
Power Rating: ~12W 
Efficiency: ≥85% 
Inrush Current: <20A
Isolation Voltage: 3 kV AC

Power Supply Unit

AC Input: 85–264V AC
DC Input: 100–300V DC
Output Voltage: 24V DC 
Output Current: 0.25A (250mA)
Efficiency: ≥80% (typical)
Ripple & Noise: <50mV peak-to-peak
Inrush Current: <15A
Isolation Voltage: 3 kV AC

Switching Power Supply

AC Input: 85–264V AC 
DC Input: 100–300V DC
Input Current: 0.2A @ 115V AC
Frequency Range: 47–63 Hz
Output Voltage: 5V DC
Ripple & Noise: <50mV peak-to-peak
Isolation Voltage: 3 kV AC 

Power Supply

AC Input: 85–264V AC 
DC Input: 100–300V DC
Input Current: 0.15A @ 115V AC
Frequency Range: 47–63 Hz
Output Voltage: 15V DC
Power Rating: 5W 
Efficiency: ≥80% (typical)
Inrush Current: <10A 
Isolation Voltage: 3 kV AC

Serial measurement unit

Supply Voltage:24V DC (±10%)
Power Consumption:8W (max)
Encoder Inputs:2x (differential RS422)
Resolution:20-bit absolute
Update Rate:4kHz 
Robot Bus:DSQC serial link
I/O Connection:16x digital I/O

Valve Flow Control

Model Number: C41-91824
Type: Flow Control Valve
Pressure Class: ANSI 150/300
Flow Coefficient (Cv/Kv): Cv = 12.5
Extended: Up to +400°C 
Control Signal: 4–20 mA, 0–10 V

Trigger Plate Digital Input Module

Number of Input Channels: Typically 8
Nominal: 24 VDC
Acceptable Range: 18–30 VDC
Input Current: 5–10 mA 

DIGITAL I/O Unit

Channels: 16 digital inputs
Rated Voltage: 24 V DC
Input Voltage Thresholds:15–35 V
Input Current: ~5 mA at rated voltage
Voltage Drop (at 500 mA): ≤0.5 V
Leakage Current: ≤0.1 mA
Response Delay: ≤0.5 ms
Power Dissipation (per channel): 150 mW

High Voltage Inverter Motherboard

Digital Inputs:24V DC
Control Voltage (Logic Side): 24V DC
High Voltage (Power Side): 3.3 kV
Control Signals: ≤ 5A 
Control-to-Power Isolation: ≥ 2500V AC

Control Board

Main Processor: 32-bit RISC-based CPU
Clock Speed: 200–500 MHz
Operating Voltage: 24V DC (±10%)
Power Consumption: 5–15W
Isolation: 1500V AC
Ethernet/IP:10/100 Mbps
Digital Inputs: 24V DC
Digital Outputs: Channels 4–8

Connector Board

Product No. : 64637029
Product type : DSCB-01C Connector Board
Rated Voltage: 28 V DC
Operating Voltage: 24V DC

Analog Signal Input Module

Current Inputs: 0–20 mA / 4–20 mA
Voltage Inputs: ±10 V DC, 1–5 V DC
Voltage Inputs: ±10 V DC, 1–5 V DC
Input Sharing: Supports HART communication
Accuracy: ±0.1% of span
Sampling Frequency: >300 scans/sec 
Input Impedance: 250 Ω for current
Group isolation: 200 V RMS
Inter-track isolation: 250 V RMS continuous

CONTROL BOARD

Digital I/O: 24V DC
Analog I/O: 4–20mA, 0–10V
Flash Memory: 16–64 MB
RAM: 8–32 MB 
Clock Speed: 100–400 MHz
Serial Ports: RS-232/RS-485 
Ethernet Port: 10/100 Mbps

External Field Exciters

Input Voltage: DC or AC
Output Current: Typically 10-100 A
Operating Temperature: -10°C to +60°C
Overload protection
Over-voltage protection
Under-voltage protection
Temperature protection