ABB

Circuit Board

Processor: 32-bit DSP
PWM Frequency: 2–16 kHz
Operating Voltage: 24V DC 
Power Consumption: ≤5W
Isolation: 1500V AC
Digital Inputs:24V DC
Analog Inputs:0–10V or 4–20mA
Relay Outputs:5A, 250V AC / 30V DC

Drive I/O Board

Operating Voltage:24V DC (±10%)
Power Consumption:≤5W
Isolation:1500V AC 
Digital Inputs:24V DC
Analog Inputs:0–10V or 4–20mA
Signal Latency:<1ms (digital I/O)
Analog Accuracy:±0.1% FSR 
Encoder Supply:5V DC ±5%, 500mA max
Environmental Noise Immunity:>1500V/m

Control Module

Voltage: 48-250V DC
Frequency: 50/60Hz (±10%)
Power Consumption: 15W typical
Binary Inputs:24-250V DC
Analog Inputs:4-20mA or ±10V
Relay Outputs:5A, 250V AC/30V DC
Processor: 32-bit dual-core CPU
Sampling Rate: 4kHz

Binary Input Module

Input Channels: 16
Input Voltage Ranges:24V DC (18-30V)
Input Current: 2-10mA 
Isolation Voltage: 2.5kV RMS
Response Time: <3ms
Overvoltage Protection: 300V DC 

POWER SUPPLY BOARD

Input Voltage:48-250V DC
Output Voltages:+5V DC  10A
Power Rating: 100W 
Efficiency: >85% at full load
Isolation: 3kV AC 
Overvoltage: 300V DC

CIRCUIT BOARD

Supply Voltage: 24V DC
Power Consumption: 8W typical
Isolation: 2.5kV AC
Analog Inputs:8 channels
Resolution: 16-bit
Range: ±10V or 4-20mA
Accuracy: ±0.1% of full scale
Digital I/O:16 digital inputs 
Sampling Rate: 4kHz per channel
Memory:256MB Flash

Binary Output Module

Input Voltage:24-250V DC
Number of Outputs:8 independent relays
Contact Type:Form A (SPST-NO)
Contact Rating:5A @ 250V AC / 30V DC
Max Switching Power:1250VA / 150W
Isolation:4kV RMS

Analog Digital Module

Voltage: ±10V DC
Current: 4-20mA
Resolution: 16-bit
Accuracy: ±0.1% of full scale
Sampling Rate: 4kHz per channel
Voltage Range: 24-250V DC
Isolation: 2.5kV RMS
Relay Contacts: 5A @ 250V AC

CIRCUIT BOARD

Input Voltage: 24V DC (±10%)
Power Consumption: 6W typical
Isolation: 2.5kV AC
Range: ±10V or 4-20mA 
Resolution: 16-bit
Accuracy: ±0.1% of full scale
Digital I/O:24V DC
Processor: 32-bit ARM Cortex-M4

Expansion module

Number of Inputs:16
Input Voltage:24-250V DC
Input Current :2-10mA per channel
Isolation:2.5kV RMS 
Number of Outputs:8
Contact Rating:5A @ 250V AC / 30V DC

CONTROL BOARD

3-phase: 380-480V AC (±10%)
DC link: 510-720V DC
Output Voltages:+24V DC (±1%)
Efficiency: >92% at full load
Isolation: 2500V AC

Control board

Voltage: 48-250V DC
Frequency: 50/60Hz (±10%)
Power Consumption: 15W typical
Memory: 256MB Flash
Sampling Rate: 4kHz
Binary Inputs: 16 
Binary Outputs: 8 

Communication adapter

Ethernet connector
Fibre optic SPA-bus connectors
Auxiliary power supply connector
SPA TX and RX LEDs
LAN and diagnostic LEDs

Ethernet Adapter

Ethernet connector
LON/SPA bus FO connector (optional)
LON/SPA Rx LED4. LON/LAN service pin
LAN and diagnostic LEDs

Servo Drive

Input Voltage:3-phase 200-480V AC (±10%)
Frequency:50/60Hz (±5%)
Power Range:3.0kW 
Peak Current :18A 
Output Current:6A RMS
Switching Frequency:8kHz (PWM)

Power Supply Unit

DC Output Voltage:24V DC (±1%)
Output Current:40A (continuous)
Power Rating:960W (max)
Efficiency:>90% (at full load)
Input Voltage:3-phase 200-480V AC (±10%)
Frequency:50/60Hz (±5%)
Input Current :10A (max @ 400V AC)
Inrush Current:30A (peak, for 10ms)

Main computer assembly

RAM:4GB DDR3
Storage:32GB SSD 
Input Voltage:24V DC (±10%)
Power Consumption:50W (typical)
Ethernet:10/100/1000 Mbps

Drive board

Input Voltage: 24 VDC (±10%)
Analog Inputs: 0–10 VDC or 4–20 mA
Operating Temperature: -25°C to +55°C (-13°F to +131°F).
Humidity: Up to 95% non-condensing.
Vibration Resistance: 5–150 Hz

Circuit Board

Power Supply: Typically 24 V DC
Input Voltage Range: typically 0-10V DC 
Operating Temperature Range: 
Typically -20°C to 70°C (-4°F to 158°F)
Storage Temperature Range: 
Typically -40°C to 85°C (-40°F to 185°F)
Humidity:  5% to 95%, non-condensing

F-series Extension Adapter

Voltage: 24V DC (±10%)
Consumption: 2.5W typical
Isolation: 1.5kV AC 
PROFIBUS DP (up to 12Mbps)
Modbus RTU (RS485)
CANopen (optional)

Frequency Converter

Frequency (f):47.5 ... 63 Hz
Frame Size:R3
Input Voltage (Uin):380 … 480 V
Mounting Type:Wall-mounted_NO UNIT$
Output Current, Normal Use (In):45 A
Output Current, Heavy-Duty Use (IHD):38 A
Output Power, Normal Use (Pn):22 kW
Output Power, Heavy-Duty Use (PHD):18.5 kW

Manual Motor Starter

Setting Range:28 ... 40 A
Rated Operational Current:40 A
Rated Insulation Voltage:690 V
Electrical Durability:25000 cycle
Ampere Rating UL/CSA:40 A
Rated Operational Power AC-3 (Pe) :hree Phase 18.5 kW
Maximum Operating Voltage UL/CSA Main Circuit:600 V AC

Interface board

Voltage: 24V DC
Consumption: 3.5W typical
Isolation: 1.5kV AC
PROFIBUS DP (up to 12Mbps)
Modbus RTU (RS485)
Node Capacity: Up to 124 devices
IEC 60870-5-101/104

Drive Control Uni

Power Supply:24V DC (±10%)
Power Consumption:5W (typical)
Isolation:1.5kV AC
Data Transfer Rate:Up to 12Mbps 
Fieldbus Protocols:PROFIBUS DP
DRIVE-CLiQ:For direct drive connection

Drive Control Unit

Processor: 32-bit dual-core ARM Cortex
Clock Speed: 800MHz
Memory: 512MB Flash
Power Supply:24V DC (±15%)
Power Consumption:8W (typical)
Isolation Voltage:2.5kV AC
I/O Capacity:16 DI/8 DO