ALL MANUFACTURERS

Digital Output Module

Number of output channels:64
Rated applied voltage:24 V DC
Load voltage:24 V DC, 100 mA
Field power supply voltagerange:20.4 to 26.4 V
Output ON voltage maximumvalue:2 V DC
Leak current maximum valuewhen output OFF:0.1 mA
Output format:Current sink

Current/Voltage Input Module

Number of input:channels16, non-isolated
Input signal:4 to 20 mA
Allowable input current/voltage:27 mA
Accuracy:±0.1% of full scale
Data refresh cycle:10 ms
Input step response time:100 ms
Transmitter power supply:22.8 to 26.4 V 
Setting of 2-wire or 4-wiretransmitter 
For each channel by setting pin

RTD Input Module

Allowable input voltage ±5 V.
Withstanding voltage :1500 V AC for 1minute 
Power ON 2 MΩ or more
Power OFF 2 MΩ or more
Accuracy ±0.03% of full scale (for 0 to 400 Ω)
Allowable total resistance of signalsource plus wiring:40 Ω or less 
(wiring resistance per wire)
Temperature drift:Max. ±30 ppm/°C.
Maximum current consumption:450 mA (5 V DC)

Power supply module

Power supply module
(220-240 V AC input)
Standard type with no explosionprotection
Basic type
With ISA Standard G3 option

SINUMERIK I/O MODULE

SINUMERIK I/O MODULE 
PP 72/48D PN 72 I 
DIGITAL48 O DIGITAL
DC 24 V, 0,25 A

Analog Current Output Module

Outputs per module 2 channel single-ended, nonisolated
Output current 0…20 mA
Resolution 12 bits, 1/4096 max, 4.88 µA/bit
Converted data Binary data 0000 to 0fff (max scale)
Conversion time 2 ms/channel
Overall accuracy 0.2% Full scale @ 0…55 °C
Calibration None required
Allowable external output load resistance600 Ω max 

Distance Fiber Module

Fiber Type:200/ 230 micron HCS (hard-clad silica) fiber
Fiber Operating Wavelength:650 nm (red)
Attenuation Levels:4.2 dB
Input Power:5V DC
Typical Repeater Distance:0-300m
Backplane Current Draw:300 mA
Product Line:ControlNet Repeater
Repeater Type:Repeater Short-Distance Fiber Module

SLC 500 Backup Scanner Module

Series:SLC 500
Module Type:Backup Scanner Module
Compatible Processors:SLC 5/02, 5/03, 5/04, 5/05
Backplane Current (5 Volts):800 milliamps
Operating Temperature:0-60 Celsius
Cable:Belden 9463
Connectors:6-Pin Phoenix Connector
Weight:2.5 pounds (1.1 kilograms)

power block

SINAMICS 
Replacement power block 
for 675-1080 V DC
910 A

VCU-160 MODULE

Manufacturer: Alfa Laval
Model Number: 3183052091
Product Name: VCU-160 Module
Application: HVAC systems
Input Voltage: Typically 24V DC or 230V AC
Operating Temperature Range: -20°C to +55°C
Protection Rating: Typically IP20