









POWER PANEL
Type:FT color
Diagonal:10.4" (264 mm)
Resolution:VGA, 640 x 480 pixels
Buffer time:10 min
Variant:Lithium ion
Clock frequency:266 MHz
L1 cache:16 kB
Flash:2 MB (for firmware)
Cooling:Passive via heat sink
Mode/Node switches:2, 16 positions each
Accuracy At 25°C: Typ. 10 ppm (1 second) per day
Controller:SMC
SMART PRESSURE TRANSMITTER
ST3000
Accuracy = +/-0.0375%
Stability = +/-0.01% per year
Reliability = 470 years MTBF
Rangeability = 400 to 1
SERVO MOTOR
SERVOMOTOR
400-480 V
WITH RESOLVER
MO=0
84 NM
IO=1
39A
8000 RPM
SMOOTH SHAFT
WITHOUT HOLDING BRAKE
Servo motor
Range Compatibility PacDrive 3
Device short name SH3.....P
Maximum mechanical speed 8000 rpm
rated supply voltage 115...480 V
Continuous stall current 1.8 A
Continuous power 690 W
Maximum current Irms 5.7 A
Speed feedback resolution 128 periods
Rotary Servo Motor
Series Type:Low-inertia
Voltage Class:400 Volts AC
Frame Size:63 millimeters
Magnetic Stack Length:3 inches
Rated Speed:7000 rpm
Feedback:Multi-turn high-resolution encoder
Shaft Key/Seal:Shaft key/no shaft seal
Brake:24 Volts DC brake
Proportional Amplifier
Connector DIN 41612, type F, 48 pin
Supply voltage 24 VDC nominal
Voltage range 20 . . . 32 VDC
Current approx. 200 mA
Reference voltages ± 15 V (± 5 %) Ø 50 mA
Current 0 . . . + 20 mA
Current + 4 . . . + 20 mA
Output voltage 24 V PWM for the solenoid
Dither frequency 100 Hz, 150 Hz, 250 Hz
Dual Reader Module
GENERATOR CONTROLLER
ANALOG INPUT: 0-5 VDC OR 4-20 MA DC
DISCRETE INPUTS (16):
5 MA EACH WHEN CLOSED TO SWITCH COMMON
(TERMINAL 65)
MAXIMUM 80 MA TOTAL
POTENTIAL TRANSFORMER INPUT: 150 VAC MAX

Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.