ALL MANUFACTURERS

FILTER

Rated Voltage: 250V AC
Current Rating: 5A (continuous)
Frequency Range: 50/60Hz 
Filter Type: π-type (C-L-C) filter
Common Mode Attenuation: >60dB @ 1MHz
Differential Mode Attenuation: >40dB @ 100kHz

FILTER

Rated Voltage: 250V AC
Current Rating: 5A (continuous)
Frequency Range: 50/60Hz 
Filter Type: π-type (C-L-C) filter
Common Mode Attenuation: >60dB @ 1MHz
Differential Mode Attenuation: >40dB @ 100kHz

Cross Profile

Cross Profile
62mm W, 
1m L For Use With TriLine

Industrial module

Channels:8/16 DI or DO
Input Voltage:24V DC
Output Type:Relay/Transistor
Isolation:1.5kV AC
PROFIBUS DP (via coupler)
Modbus RTU (RS-485)
EtherNet/IP (optional)

Control Board

Operating Voltage: 24V DC (±10%)
Power Consumption: <5W typical
Isolation Voltage: 1500V AC
Analog Inputs:2 channels
Digital Inputs:24V DC, optically isolated
Relay Outputs:250V AC/30V DC, 2A
PROFIBUS DP
Modbus RTU
DeviceNet

Control Module

Input Channels: 4 
Voltage: ±10V, ±5V, 0-10V, 0-5V
Current: 0-20mA, 4-20mA (with HART support)
Resistance: RTD (Pt100, Pt1000)
Thermocouple: J, K, T, E, N, R, S, B
Resolution: 16-bit (0.0015% of range)
Accuracy: ±0.05% of span (typical)
Update Rate: 50ms per channel (all channels)
Common Mode Rejection: >120dB @ 50/60Hz

Control Circuit Board

Operating Voltage: 24V DC ±10%
Power Consumption: <8W typical
Isolation Voltage: 2000V AC
Analog Inputs:0-10V/±10V/4-20mA configurable
Digital Inputs:24V DC, optically isolated
Relay Outputs:250V AC/30V DC, 5A
PROFIBUS DP
CANopen
Modbus RTU

Control Circuit Board

Power Consumption:6W typical
Isolation Voltage:2000V AC (input to output)
Analog Inputs:2 channels (0-10V/4-20mA)
Digital Inputs:6 channels (24V DC)
Relay Outputs:3 channels (250V AC/5A)
Resolution: 14-bit (analog inputs)
Sampling Rate: 10kHz (control loop)
Response Time: <2ms (digital I/O)
Accuracy: ±0.1% of full scale

Control Circuit Board

Operating Voltage: 24V DC ±10%
Power Consumption: 10W typical
Isolation Voltage: 2500V AC (input to output)
Processor: 32-bit DSP + FPGA
Control Loop Update: 62.5μs
Analog Inputs:2 channels (±10V/4-20mA)
Digital Inputs:8 channels (24V DC)
Relay Outputs:3 channels (250V AC/2A)
Encoder Interface:1 channel (HTL/TTL/SSI)

Controller Card

Processor:Dual-core ARM Cortex + FPGA
Clock Speed:800 MHz (ARM), 200 MHz (FPGA)
Memory:512 MB DDR3 RAM
Operating Voltage:24V DC ±10%
Power Consumption:5W (max)
Isolation :2500V AC
Analog Inputs:4 ch (16-bit, ±10V/4-20mA)
Digital Inputs:12 ch (24V DC, 3ms debounce)
Relay Outputs:4 ch (250V AC/5A)
Encoder:2 ch (HTL/TTL/SSI/EnDat 2.2)