ALL MANUFACTURERS

Digital Output Module

DIGITAL OUTPUT MODULE
12/24 VDC
0.5 AMP
16 POINT
TRANSISTOR OUPTUT
PHOTO COUPLER ISOLATION
RESPONSE TIME 1 MS OR LESS

Digital Input Module

16 point DC24V Input Module
Input point: 16 point
Rated input:voltage DC24V 
Rated input current :About 4 ㎃ 
Operation voltage range:DC20.4~28.8V
Input Derating:None
On Voltage/Current:DC19V or higher / 3 mA or higher 
Off Voltage/Current:DC11V or lower / 1.7 mA or lower
Input resistance:About 5.6 kΩ

Digital Input Module

Input point:8 point 
Isolation method:Photo coupler isolation 
Rated input voltage:DC24V
Rated input current:About 4 ㎃ 
Operation voltage range:DC20.4~28.8V 
Input Derating:None
On Voltage/Current:DC19V or higher / 3 mA or higher 
Off Voltage/Current:DC11V or lower / 1.7 mA or lower 
Input resistance:About 5.6 kΩ

Multimode Fiber Optic Cable

Sync Cable 
Multimode Fiber Optic Cable
LC connector
2.0m
Core/Cladding:50/125μm
Bandwidth:2000 MHz·km @850nm
Attenuation:≤3.0 dB/km @850nm
Numerical Aperture:0.20 ± 0.015

Dummy Module

DUMMY Module for empty I/O slots
DUMMY Module for empty power supply slots
used on ML200R only
Dust protection module for unused slot

Redundant Expansion Driver Module

Input Voltage:24VDC (18-36V)
Power Dissipation:28W (35W peak)
Isolation :3000V AC (field/logic)
Analog I/O:6 ch (16-bit, ±0.025%)
Digital I/O:12 ch (2A STO outputs)
PWM Output:50kHz

Redundant Expansion Driver

Input Voltage:24V DC (20-30V, PELV)
Power Consumption:25W (normal)
Isolation:3000V AC (field to logic)
Safety Inputs:8 channels (24V DC, certified)
Safety Outputs:6 channels 
Analog Monitoring:4 channels 

Redundant Expansion Driver

Redundant Expansion Driver
Redundant Expansion Driver, TP/FO
Input Voltage:24V DC (18-36V range)
Power Consumption:22W (operational), 30W (max)
Isolation:2500V AC 
Digital Inputs:12 channels
Analog Outputs:4 channels
Drive Outputs:6 channels 

MACH 3 Distributed I/O unit

Input Voltage:24V DC (19.2-30V)
Power Consumption:12W (typical), 18W (max)
Backplane Current:800mA (max)
Isolation :1500V AC 
Digital Channels:32
Analog Channels:8 (16-bit resolution)
Protocols Supported:PROFINET IO, Modbus TCP
Data Rate:100Mbps (full duplex)
Cycle Time:≤1ms (synchronized)
Jitter:<1μs

I/O Interface Module

Expansion Drive
I/O Interface Module
Fiber Optic
Input Voltage:24V DC (20-30V, PELV)
Power Consumption:18W 
Isolation:2500V AC
Safety Inputs:8 channels 
Safety Outputs:6 channels
Analog Monitoring:2 channels