ALL MANUFACTURERS

Servo Control Module

Series: Mark VIe
Microprocessor: Intel Celeron 650 MHz
Number of inputs: 8
Power supply voltage: 28 V dc
Memory: 128 MB SDRAM
Number of outputs: 2
LVDT Excitation Output: 3.2 kHz
Programming: Boolean
Product Type: Simplex Servo Control I/O Module

High-Speed Counter Module

Brand:GE Intelligent Platforms/GE Fanuc
Series:Versamax
Part Number:IC200MDD841
Bulletin:IC200
Product Type:High-Speed Counter Module
Inputs:20
Outputs:12
Voltage:24 V DC
Current:30 mA
Backplane Power:5 V

Analog I/O Pack

Ambient Temperature Range -22 to 149°F
Class I, Div. 2, Groups A, B, C, D Standard
ANSI/ISA - 12. 12.01-2015
Functional Acronym/Abbreviation PAIC
Model Type Analog I/O Pack
Non-Hazardous Certification UL E207865

Relay Output module

Series:PACSystem RX3i
Part Number:IC694MDL930
No of Channels:Sixteen (16), individually isolated
Description:AC/DC Voltage Output Module
No. of channels:Eight (8), individually isolated
Operating Voltage:5 to 30 Volts DC or 5 to 250 Volts AC
Contact form:Normally Open (N.O.) Form A contacts
Output voltage range:5-250VAC / 5-30 VDC
Nominal output voltage:120-240 VAC; 24 VDC
Max. Backplane Draw:6.0 Milliamps
Minimum load:10 mA
Inrush Rating:5.0 Amps
Maximum inrush:5:00 AM
Relay contact life:150,000 -1,000,000 operations

CIRCUIT BOARD

Primary: 24VDC nominal
Backplane Outputs: +5V
Current Capacity:Up to 20A

I/O Pack Processor Board

Estimated 512 MB+ RAM
Modbus TCP/IP, Ethernet/IP
Analog (AI): ±10V DC, 4-20 mA
Digital (DI): 24V DC
Power Supply: 24V DC (±20%)
Power Consumption: < 10W

MICRO EXPANSION UNIT

IC200UEO116
MICRO EXPANSION UNIT
VERSAMAX
16 POINT
16 OUTPUTS AT 24 VDC
24 VDC POWER SUPPLY

MICRO CONTROLLER

IC200UDD104
MICRO CONTROLLER
VERSAMAX
14 POINT PLC
8 INPUTS AT 24 VDC
2 OUTPUTS AT 24 VDC AND 1 AMP
4 OUTPUTS AT 24 VDC AND 0.5 AMP
24 VDC POWER

CABLE KIT FOR HIGH DENSITY I/O MODULES

Series:Series 90-30
Part Number:IC693CBK001
Type:Cable Kit
Function:High density cables
Compatibility:32-point I/O modules
Connector:Fujitsu FCN-365S024-AU
Amperage rating:1.2 Amps on each conductor
Length:10 feet (3 meters)

MODULE CARRIER

64-slot address bus
eight SafetyNet and/or standard I/O modules
DIN-rail or panel mounting
Carries control signals and data on Railbus
Distributes System Power to modules
Distributes Bussed Field Power to modules
Isolated earthing bar for cable screens/shields

SAFETY DISCRETE INPUT / OUTPUT MODULE

SAFETY DISCRETE INPUT / OUTPUT MODULE
MTL 800 SERIES
8 CHANNEL
12 VDC
100 MA
GE FANUC DAC SYSTEMS

SafetyNet ANALOGUE INPUT MODULE

SAFETY ANALOG INPUT
8 CHANNEL
SINGLE ENDED
4-20 MA
FOR USE WITH FB-8800 
SAFETY LOGIC SOLVER

SafetyNet Controller

SAFETYNET CONTROLLER
12 VDC
FOR USE IN SIL2 SAFETY APPLICATIONS
COMMUNICATES UP TO 64 I/O MODULES

9 slot plus power supply

Series:Series 90-70
Product Description:9-slot , rear mount, rack
Part Number:IC697CHS790
Voltage:5 Volts DC
Mounting:Panel mounting
Current:20 Amperes
VME System:VME standard C.1
Product lifecycle:Discontinued
Rear mounting:10" (255 mm) enclosure
Rack extension:Supported
Standard:VME
Front Mounting:19" Standard rack
Supported:Two (2)
Number of Slots:9
Current Required from I/O Bus:0.5 amps
Enclosure Depth:10 inches

Discrete output module

Series:Series 90-70
Manufacturer:GE Fanuc; Emerson Automation (Current)
Part Number:IC697MDL750
Rated voltage:24 to 48 Volts DC
No of Channels:Thirty-Two (32)
No. of output groups:Four (4)
Channels per group:Eight (8)
Current draw:0.25 A
Required current:0.25 Amps
Wiring configuration:Positive Logic
Output voltage range:20-60 VDC
Number of outputs:32
On response time, maximum:1 ms
Off response time, maximum:1 ms
Output signal range:20 - 60 VDC
Isolation voltage:1500 Volts