Series:Series 90-30
Manufacturer:GE Fanuc
Part Number:IC693PBM200
Product Description:Profibus Master Module
Communication interface:One (1) RS232 Service port; One (1) Profibus Master Port
Communication protocol:ProfiBus
No. of supported DP slave:125
Data rates:All standard data rates
Input data:244 Bytes
Output data:244 Bytes
Current draw:450mA @ 5VDC
Product Lifecycle Status:Discontinued/Obsolete
Operating temperature:0 to 60 degrees Celsius
Product Description:Analog input module
Number of Inputs:8
No of Channels:Eight (8) analog input
Input Type:Single-Ended
Analog input signal:Analog input signal
LED Indicators:2 (The "OK" and the "INT PWR" LED
Analog input resolution:12 bits
Voltage Type:Unipolar or Bipolar
Brand:GE Fanuc
Series:Versamax
Part Number:IC200MDL742
Product Description:Discrete Output Module
Number of Points:16 Outputs
Number of groups:2
Point to Point Isolation:None
Series:Versamax
Part Number:IC200MDL241
Description:Discrete Input Module
Operating Voltage:240 Volts AC
Backplane Current Rating:110 milliamps
Maximum Response Time (On):1 Cycle
Built-in Power:Yes
Number of Inputs:16 Discrete Inputs
Group Isolation:Yes
ON state Voltage:15-30 VDC
Filter time:0 ms, 1.0 ms, 7.0ms
OFF state voltage:0-5 VDC
Backplane Current Consumption:5 Volts, 50 milliamps
OFF state current:0-0.5 mA
On-state current:2.0 - 5.5 mA
Product type:Discrete Input Module
No. of input groups:Four (4)
Number of Points:32 Inputs
Input signal, nominal:24 VDC
Brand:GE Fanuc
Series:Versamax
Part Number:IC200MDL244
Application:Versamax I/O and Control System
Operating Voltage:240 Volts AC
Built-in Power:Yes
Number of Inputs:8 Discrete Inputs
Channel Isolation:Yes
Location:Versamax I/O Carrier
Series:Versamax
Part Number:IC200CPU001
Description:Configurable CPU
Product type:CPU module
Serial Ports:2
User Memory:34K Bytes
Product Description:Central Processing Unit (CPU)
Floating point math:Supported
Discrete Internal Bits:1024 points
Discrete Inputs:2048 points
Discrete Temporary Bits:256 points
Discrete Outputs:2048 points
Boolean Execution Speed:1.8 ms / K
Type of Memory Storage:RAM and Flash
Modbus Registers:32
Real-Time Clock Accuracy:100 ppm
Global Discrete Bits:1280 points
Floating Point data:Supported
Battery Backed RTC:Installed
Override functions:Supported
Series:VersaMax
Product Type:Compact box-style I/O carrier
No. of Terminals:36 terminal
Single-Wire Cross Section:0.36 mm2 to 2.1 mm2
Two-Wire Cross Section:Up to 0.86 mm2
Current rating per point:2 A
Voltage rating:0-264 VAC
Current per Point:2 Amps
Current rating per each power terminal:8A
Current rating, per point:2 Amperes
Voltage supply, max:264 VAC
Current rating per ground and power segment:8 Amperes
Maximum Voltage per Point;264 Volts AC
Transient voltage, max:300 VAC
Series:Field Control
Manufacturer:GE Fanuc
Part Number:IC670CHS001
Type of Component:I/O Base, Barrier Style
Number of Terminals:37
Product Description:I/O Carrier Module
Carrier module terminals:Barrier style
Terminal Torque:8 pounds on an inch
No. of Terminals:37 terminals
Insulation rating:90 Degree Celsius
Tightening torque:8 in-lb.
Mounting:DIN Rail / Panel mount
Series:Versamax
Part Number:IC200MDL643
Product Description:Discrete Input Module
Number of Points:16 Inputs
Number of groups:2
Input Impedance:2.4K Ohms
Series:RX3i PacSystem
Part Number:IC695CHS012
Compatibility:RX3i PACSystem, Series 90-30 and option modules
Number of Slots:12
Backplane Support:Supports both PCI and High Speed Serial
How Swap Support:Yes
Internal Power, 5VDC:240 milliamps
Internal Power, 3.3 VDC:600 milliamps
Mounting:Rack
Type:Universal backplane
Input:+24 Volts
Backplane Orientation:Horizontal
Series:VersaMax
Part Number:IC200ALG331
Output signal, nominal:4-20 mA; +/- 10 VDC
Description:Analog output module
Channel:4
Digital resolution:16 bits
Voltage:-10-10 Volts DC
Compatible signals:4-20 mA; - / +10VDC
Current:4-20 milliamperes
Update Time:7 milliseconds
Isolation Input to Logic:250 Volts AC
Backplane current:10 mA @ 5VDC; 115 mA @ 3.3 V
Configurable output default:Hold Last State; 0 (configurable)
External Power supply:18-30 VDC
Isolation Input to Ground:1500 Volts AC for 60 seconds
Module width:Single slot
LED indicators:FLD PWR LED; OK LED
Series:Series 90-30
Part Number:IC693CPU363
User memory:240K Bytes
CPU type:Single slot CPU module
Register memory:240 kilobytes
Serial port:RS-485 (via power supply
Number of Ethernet ports:N/A
Product type:CPU module
Compatibility:GE Fanuc 90-30 PLCs
Serial ports:3
Clock speed:25 Megahertz
Microprocessor:80386EX
Discrete inputs:2048
Discrete outputs:2048
Type of Memory Storage:RAM and Flash
ANALOG INPUT/OUTPUT MODULE
I/O PACK
FOR A GE SPEEDTRONIC MKVIE
GAS TURBINE CONTROL
Ambient Temperature Range:-40 to 158°F
Analog Transmitter Power:22.8 VDC
Input Voltage: 24V DC nominal
Power Consumption: 1.5 W
Current Draw:24V DC: 90 mA
Operating Temperature:
-40°C to +70°C (-40°F to +158°F)
Storage Temperature:
-40°C to +85°C (-40°F to +185°F)
Humidity: 5% to 95% (non-condensing)
