ALL MANUFACTURERS

CPU222 Compact Unit

SITOP PSU100L 24 V/2.5 A

Rotational ac motor M10

Rated Output:1.8 kW 
Peak Torque:180 Nm (transient, 1 sec)
Rated Torque:60 Nm (continuous)
Rated Speed:1,500 rpm
Max Speed:3,000 rpm
Voltage Rating:400 V AC (3-phase)
Current Rating:4.2 A (RMS, continuous) / 12.5 A (peak)
Feedback Device:Resolver (multispeed, 1x/4x)

INV DC 460V 3PH 45KW 92A VCH

Velocity Monitor

Impulse Acceleration
Acceleration 2
Recip Velocity
Low Frequency Recip Velocity
Signal:Accepts from 1 to 4 proximityprobe signals.
Special inhibit:Contact closure5 Vdc @ 390μA typical
Powerconsumption: 7.7 watts, nominal

BM141 Basic Module Digital Input

3300 XL Proximitor Sensor

52 5.0 meters (16.4 feet) system length
no mounting hardware
05 CSA, ATEX, IECEx Approvals

3300 NSv Proximity Probes

5.3 ± 0.7 
3300 NSv Probe
3/8-24 UNF thread
withoutarmor
Maximum unthreaded length: 9.2 in
Minimum unthreaded length: 0.0 in
Example: 0 4 = 0.4 in  
7.0 metres (23.0 feet) 
0 5 Multiple Approvals 

Analog Output Module

ANALOG OUPUT MODULE
8 OUTPUTS
4-20 MA
12 BIT RESOLUTION

SERIES 8 PROFIBUS GATEWAY ASSY, COATED

Power Module

Interface Module

Range: Typically 4-20 mA
Input Impedance:≤ 10 Ω
Load Capacity: Standard 0-500 Ω
Voltage: 24 V DC 
Test Voltage: Typically 1.5 kV AC
Typical: ±0.1% of full scale 

Non-redundant Controller with 28 mixed onboard I/O (new, ROHS)

Redundant Controller

5069 Relay Output Module

5069 EtherNet/IP Adapter

PowerFlex 700S AC Drive 85 A 45 kW 20D

Communication Module

Communication Interface:RS-232, RS-485
Data Transfer Speed:Up to 115,200 bps
Power Supply:24V DC
Mounting Type:DIN rail mounted
Operating Temperature:-20°C to 60°C (-4°F to 140°F)
Storage Temperature:-40°C to 85°C (-40°F to 185°F)
Humidity Tolerance:5% to 95% non-condensing

Power Interface Module

Voltage: 125 VDC Nominal 
Power Consumption: Typically < 5W
Input-to-Input: 1500 VAC min.
Input-to-Output/Logic: 1500 VAC min.
Output-to-Output: 500 VAC min.
Output/Logic-to-S+ I/O: 500 VAC min

Analog Input Module - RTD

OP73 MICRO Operator Panel for S7-200

Analog to digital module daughterboard

Mark V system
Voltage Rating: Typically  24V DC
Operating Temperature: 
0°C to 70°C (32°F to 158°F)
Storage Temperature: 
-40°C to 85°C (-40°F to 185°F)
Humidity:  5% to 95% RH

Communication Module CP 443-5 Extended

Power Supply

PS307 Power Supply