Supply Voltage:24V DC (±15%)
Power Consumption:2W (base unit)
Backplane Current:800mA max
Isolation :1500V AC
Modules per Unit: Up to 8 I/O modules
Digital I/O :16/32 channel
Analog I/O:8/16 channel
Communication:PROFIBUS, Ethernet
Memory Size:142 kB
Memory Type User Data:RAM
Controller Processing Time:0.00008 ms
Number of Digital Inputs:8
Number of Digital Outputs:6
Number of Digital Configurable I/Os:0
Input Voltage Type:DC
Rated Voltage (Ur):24 V DC
Supply Voltage:20.4 … 28.8 V DC
Supply Voltage:24-250V DC
Power Consumption:6W (typical)
Analog Inputs:12x (16-bit, ±10V/4-20mA)
Digital I/O:24x (24V DC, opto-isolated)
Isolation :3000V AC (I/O to logic)
Memory: 512MB DDR3
Memory:256MB Flash
Control Loop Speed:<50μs
Analog Inputs:8x (16-bit, ±10V/4-20mA)
Digital I/O:16x (24V DC, opto-isolated)
Encoder Interfaces:2x (A/B/Z + SSI)
Isolation Voltage:2500V AC (field to logic)
Supply Voltage:24V DC (±10%)
Power Consumption:5W (typical)
Isolation:1500V AC
Protocol :ControlNet
Data Rate:5Mbps
Max Nodes:99 per network
Max Cable Length:1000m
Rated Current:1A or 5A
Voltage Inputs:100-240V AC
Burden:<0.2VA (current)
Current (0.1-40In):±0.5%
Voltage:±0.2%
Frequency:±0.01Hz
Operating range: 1.05-1.4 pu V/Hz
ACS880-01-04A8-5
3AUA0000090430
LV AC industrial wall-mounted single drive
IEC: Pn 2.2 kW, 4.8 A, 500 V
UL: Pld 3 Hp, 4.8 A, 460 V
PN: 2.2 kW, IN: 4.8 A
(ACS880-01-04A8-5)
ACS880-01-021A-5
3AUA0000090435
LV AC industrial wall-mounted single drive
IEC: Pn 11 kW, 21 A, 500 V
UL: Pld 15 Hp, 21 A, 460 V
PN: 11.0 kW, IN: 21 A
(ACS880-01-021A-5)
Main Processor:216MHz
Memory:512MB DDR3
A/D Conversion:16-bit, 1μs sampling
Analog Inputs:12x (±10V/4-20mA, 16-bit)
Digital I/O:24x (24V DC, opto-isolated)
Communication Ports2x RS-485
FieldBusPlug family of bus connectors
Current Rating: Up to 630A
Voltage: 1000V AC
Material: Tin-plated copper alloy
Protocol: PROFIBUS DP-V1
Speed: Up to 12 Mbps
Isolation: 1500V AC
Inputs per module 16
Input types V, mA
A/D Converter One per module
A/D Resolution 15 Bits
Update rate 100ms
Long term Stability 0.1% per year
Channel Configuration Data Stored in non-volatile memory
Output Channels 32
Output Type SINK (Open Drain)
Load Voltage 15 30 VDC
MaximumLoad Current 0.1 A per channel (Max)
Galvanic Isolation 1000 VAC RMS for System – to –
Field isolation (user supplied field Power)
On-State Voltage 0v VDC (load current @ 0.1A max )
Off-State Voltage 24 V (typ),
Off-State Leak Current 100 µA (max)
Turn-On/Turn-Off Time 10 ms (max)
Number of output channels 8 channels, module isolation
Rated output range 4 to 20 mA
Maximum range of guaranteed precision 1.25 to 23 mA
Output range 1.25 to 23 mA
Allowable load resistance @ rated range 230 to 600 Ω
Accuracy ±48 µA
Data update frequency 40 ms
Temperature drift ±16 µA/10 ºC
Withstand voltage 1.5 kV AC between output signal and system for 1 minute
Operating Voltage:24-250V DC/AC
Power Consumption:8W
Isolation Voltage:2kV AC
Digital Inputs:24V DC
Digital Outputs:5A @ 250V AC
Processor:32-bit RISC
Clock Speed:100 MHz
RAM:128 MB
Flash Memory:64 MB
Processor Type:Dual PowerPC-based
Clock Speed:400 MHz (each core)
RAM:256 MB
Flash Memory:128 MB
Control Cycle Time:<1 ms
Analog Inputs:16 channels (0-10V, 4-20mA)
Digital Inputs:32 channels (24V DC)
Digital Outputs:24 channels (relay contacts)
Communication Ports 4 (Ethernet, RS-485, etc.)
Power Supply:24V DC (±10%)
Power Consumption:25W (typical)
Isolation Voltage:2000V AC
Power Supply:24V DC
Power Consumption:3.5W (typical)
Isolation :500V AC
Channels:8
Input Resolution:16-bit
Accuracy:±0.1% of span (RTD)
Sampling Rate:10 samples/sec
Power Supply:24V DC
Power Consumption:4W (max)
Isolation :500V AC
Input Impedance:>1MΩ
Channels:8
Resolution:24-bit ADC
Sampling Rate:10 samples/sec
Common Mode Rejection:>120dB @ 50/60Hz
mV Input:±50mV
