ALL MANUFACTURERS

DP97 *B Display Processor Card

ANALOG CARD

ANALOG CARD
0(4)-20 MA INPUT
16 CHANNEL
24 VDC SUPPLY
CARD MOUNT

Safe digital output module (24 Vdc, 0.55 A, 8 channels) (conformal coated)

Analog Input Module

Input Type:Voltage, current 
Input Channels:16 Channels
Common Mode Voltage, dc to 60 Hz:-6 to +5 V peak
A/D Converter Resolution:16 bits
Input Range:1 0 to 5 V, 1 to 5 V, 0.4 to 2 V, 4-20 mA
Normal Mode Rejection Ratio, at 60 Hz:19 dB
Normal Mode Filter Response:Single-pole RC, -3 dB @ 6.5 Hz
Maximum Normal Mode Input:± 30 Volts
Crosstalk, dc to 60 Hz:-60 dB
Input Impedance (voltage inputs):> 10 M Ω powered
Input Scan Rate:50 ms 
Hardware Accuracy (@ CMV = 0 V) 
± 0.075% of full-scale (23.5°± 2°C)
± 0.15% of full-scale (0 to 60°C) 

2-port Ethernet adapter

Power Supply:
Typically 24 V DC 
Range: Typically -10°C to +55°C
Storage Temperature: Typically -40°C to +70°C

16 Point Analog Input Module - HART

VF701S1 Interface Module

High Density Main Chassis

Input Voltage:100-240V AC
Power Consumption:300W max
Backplane Power:5V DC, 24V DC
Backplane Type:High-speed TMR bus
Data Rate:100 Mbps 

IGCT Module

Blocking Voltage : 4500V
Maximum Repetitive Off-State Voltage:4500V
Gate Trigger Voltage (VGT): 1.5V–2.5V
Peak Surge Current (ITSM): 25–30kA
Critical Rate of Current Rise (di/dt): 1kA/µs
Turn-On Time (ton): <5µs
Turn-Off Time (toff): <10µs
Switching Frequency: Up to 500Hz 

Bus Interface Module

Auxiliary Smart Battery Module for PACSystems. Provides low battery signal to the CPU. Module mounts external to the controller.

DeviceNet Master Module for RX3i. Module can only be located in the CPUbase. The module is on the high speed serial bus.

Isolated Analog Output module, 8 channels, that is configurable for voltage and current. Requires high capacity terminal block IC694TBB032 or IC694TBS032.

Modbus Master module for VersaMax Genius NIU. Module supports one RS-485 serial port.

Digital Output Module

Number of output channels 32 
Rated applied voltage 24 V DC
External power supply rating 24 V DC, 50 mA 
Output ON voltage maximumvalue 2 V DC
Output format Current sink 
Pulse width 8 ms to 7200 s 

Driver Board IGBT Module

Model: 6MBI450U-120
Current Rating: 450A
Voltage Rating: 1200V
Type: ECONO+
Model: AGDR-71C

System PSU 115/230VAC 24Vdc 50A CC,UL508

VF701S2 Interface Module

Safe digital input module (24 Vdc, 16 channels) (conformal coated)

C300 Controller

8CPCNT02
CONTROL PROCESSOR MODULE
UNCOATED
DUAL LINK
24 VDC

Relay Output Base

PLC RELAY OUTPUT
BASE
Current: 2A to 5A
Voltage: Up to 250V AC/DC or 24V DC
AC: Up to 250V AC, 5A 
DC: Up to 30V DC, 5A 
Operating Temperature Range -10°C to 60°C

Analog Output Module

Output Type:4-20 mA
Output Channels:16
Output Temperature Stability ±0.02% Full Scale/°C
Output Readback Accuracy ±4%
Output Current Linearity ± 0.05% nominal
Resolution ± 0.05%
Maximum Output Compliant Voltage:15 V
Maximum Resistive Load:750 Ω @ 20 mA

Sinec L2FO Optical Link Module

S8 AO Non-HART IOM (16), COATED

Analog Output Module

Analog Output (AO) Module 
Extensive self diagnostics 
Optional redundancy 
Series 8 AO module supports

S8 TC/RTD IOTA (16), BLK, COATED

INPUT MODULE

INPUT MODULE
DIGITAL
IOTA
COATED
32 CHANNELS
SERIES 8
24 V

S8 C300 CONTROLLER IOTA, BLK, COATED

8CTCNTA1
DISCONTINUED BY MANUFACTURER
I/O CONTROLLER
TERMINATION ASSEMBLEY
COATED
SERIES 8
C300