
Printed circuit board
Manufacturer GE Energy
Series Mark VIe Wind
Part Number IS210AEAAH3BKE
Functional Acronym AEPS
Functional Description Printed circuit board
PCB Coating Conformal Coating
Printed circuit board
Model: IS210AEDBH4AGD
Manufacturer: General Electric (GE)
Type: Printed Circuit Board (PCB)
System Compatibility: GE Mark VIe turbine control system
Temperature Range: Industrial-grade, typically operates in a range from 0°C to 60°C
printed circuit board
Input Voltage: 24V DC
Operating Temperature: -30°C to +65°C
Humidity: Typically 0-95% (non-condensing)
Trigger Plate Digital Input Module
Number of Input Channels: Typically 8
Nominal: 24 VDC
Acceptable Range: 18–30 VDC
Input Current: 5–10 mA
Processor Module
CP451
Processor Module
(for AFV300/AFV400)
This product is a replacement
for CP451-11 Processor Module
-5 - Standard type with no explosion protection
1 - With ISA Standard G3 option
3300 XL Proximitor Sensor
Sensitivity: 7.87 V/mm (200 mV/mil) ±5%
Output Signal: -2V to -18V DC
Frequency Response: 0 to 10 kHz (±1dB)
Linearity: ±1% of full scale
Power Supply: -18V to -24V DC
Probe Length: Varies by application
DIGITAL I/O Unit
Channels: 16 digital inputs
Rated Voltage: 24 V DC
Input Voltage Thresholds:15–35 V
Input Current: ~5 mA at rated voltage
Voltage Drop (at 500 mA): ≤0.5 V
Leakage Current: ≤0.1 mA
Response Delay: ≤0.5 ms
Power Dissipation (per channel): 150 mW
Interconnect Cable
Impedance: Probable 50 Ohms
Voltage Rating: ≤30 V DC
Operating Temperature: -40°C to +85°C
Shielding: Dual-layer (foil + braided shield) for robust EMI/RFI protection
Bend Radius: ≥10x cable diameter
Velomitor Piezo-velocity Sensor
02 M8 x 1
Sensitivity3.94mV/mm/s (100 mV/in/s)±5%.
Velocity Range 1270 mm/s (50 in/s) peak
AmplitudeLinearity±2% to 152 mm/s (6 in/s)peak
MountedResonantFrequencyGreater than 12 kHz.
SERIES C CONTROL MODULE
Operating Voltage: 24 V DC
Input Current: 1.5 A
Output Power: 10 W
Output Frequency: 1 kHz
Operating Temperature: -20°C to +70°C
Humidity Range: 5% to 95% non-condensing
High Voltage Inverter Motherboard
Digital Inputs:24V DC
Control Voltage (Logic Side): 24V DC
High Voltage (Power Side): 3.3 kV
Control Signals: ≤ 5A
Control-to-Power Isolation: ≥ 2500V AC
Control Board
Main Processor: 32-bit RISC-based CPU
Clock Speed: 200–500 MHz
Operating Voltage: 24V DC (±10%)
Power Consumption: 5–15W
Isolation: 1500V AC
Ethernet/IP:10/100 Mbps
Digital Inputs: 24V DC
Digital Outputs: Channels 4–8
Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.