Signal termination for 4–20 mA
Current: 4–20 mA
Voltage: 0–10 V DC, ±5 V DC
Temperature: RTD (Pt100/1000)
Cable Length: 10 meters (indicated by "-10" suffix)
Bend Radius: ≥8x cable diameter
Operating Temperature: -40°C to +105°C (-40°F to +221°F)
Number of Channels: 8 or 16
Current: 4–20 mA
Voltage: 0–10 V DC, ±10 V DC
Channel-to-channel: ≥250 V AC
Field-to-system: 1500 V AC
Supply Voltage: 24 V DC (±10%)
Power Consumption: ≤5 W
ABB infi-90 Termination Loop Cable
Gauge: 18–24 AWG
Voltage Rating: ≤60 V DC
Operating Temperature: -20°C to +70°C (-4°F to +158°F)
Humidity: 5–95% RH (non-condensing)
Number of Inputs: 14 digital Output
Input Type: Sinking or sourcing (configurable)
Input Current: Typically 5-10 mA per input
Isolation Voltage: Typically 500V AC between field and logic side
Response Time: Typically 1-10 ms
Analog: 20 mA max per channel
Number of Inputs: 16 digital inputs
Input Type: Sinking or sourcing (configurable)
Input Current: Typically 5-10 mA per input
Isolation Voltage: Typically 500V AC between field and logic side
Response Time: Typically 1-10 ms
Analog: 20 mA max per channel
High-Power, Extra-Compact Controller
8 Standard Control Templates
Flexible Control Logic
Easy setup = front panel or industry's
easiest configuration software
Easy-TuneTM PID self-tuning algorithm
Expandable /0 Options
RS-232 & RS-485 Communication Options
Easy to Install
Rugged, NEMA 4 Packaging
TRL810K2
Terminal Module
8 channels
Analog or digital input/output, depending on the specific configuration
Typically 24V DC or as required by the system
20°C to +60°C
NTRO05-A
Digital Output Module
5 channels
Relay output or transistor output
4 V DC or 120 V AC output, depending on configuration
Maximum output current per channel: 1 A
24 V DC power supply
Input Voltage:24 V DC
Power Consumption:≤ 8 W
Time Sync Input:IRIG-B (modulated/dc level)
Signal Voltage:TTL/RS-422 compatible (0–5 V DC)
Accuracy:±1 ms
Time Resolution:1 ms
Isolation:1500 V AC
SPSEM11
SOE Master Module
Sequence of Events Recording
Accurate to millisecond level
Typically supports Ethernet, MODBUS, or other industrial protocols
Operating temperature range: -20°C to +60°C
Isolation Voltage:1.5 kV AC
Power Supply:24 V DC (±15%), 5 W typical
Redundancy:Dual fiber ports
Fiber Interface:2x ST/PC connectors
Data Rate:10 Mbps
Max. Distance:2 km
Operating Voltage:24V DC (±10%), 3W typical
Accuracy:±0.5% of full scale
Resolution:0.1% (for bargraph display)
Update Rate:100 ms
Isolation: 1.5 kV AC
MODE Switch: Toggle MAN/AUTO/CAS
Processor: 32-bit RISC processor
Memory:8MB RAM
Power Supply: 24V DC ±10%
Power Consumption: <15W
Operating Voltage Range: 18-30V DC
Screw terminals for power
BNC or ST-type fiber for Infi-net
DB9 or DB25 for serial
RJ45 for Ethernet (if equipped)
