







Kindly Reminder
Can't Find Your Required Components?
If your specific control system parts are not listed on our website, contact us immediately.
Our procurement specialists will source genuine new components tailored to your technical requirements.
All Amikon-supplied automation parts include:
12 Months Warranty
24h /7 online Service ( info@amikon.cn | +86 18020776786 )
Original new Factory Sealed
16710 Interconnect Cables
3-conductor shielded
22 AWG (0.5 mm2)
armored cable with 3- socket plug at one end,
terminal lugs at the other end
Minimum length of 3.0 ft (0.9 m),
maximum length of 99 ft (30 m).
Cable Length Option in feet : 35 = 35ft
Interconnect Cable
Product Type : Interconnect Cable
Model : 16710 - TEIP11-PS I/P Converter,
signal converter for standard signals,
with power stage
Cable Length Option : 20 - 20 ft
Interconnect Cable
Length:9 feet (2.74 meters)
Conductors:4 conductors (2 twisted pairs)
Wire Gauge:22 AWG stranded copper
Insulation:Fluorinated Ethylene Propylene (FEP)
Voltage Rating:300V AC/DC
Interconnect Cable
Voltage Rating: ≤300 VAC/DC
Capacitance: ≤100 pF/m
Temperature Range: -40°C to +85°C (-40°F to +185°F)
end Radius: ≥10x cable
Interconnect Cable
3-Wire Cable
Interconnect Cable without Armor
33 = 33 ft / 10 metres
Interconnect Cable
Impedance: Probable 50 Ohms
Voltage Rating: ≤30 V DC
Operating Temperature: -40°C to +85°C
Shielding: Dual-layer (foil + braided shield) for robust EMI/RFI protection
Bend Radius: ≥10x cable diameter
Interconnect Cable
Coaxial, shielded
300 V AC/DC
10 feet (3.05 meters)
9-pin D-subminiature (D-Sub)
male connectors at both ends

Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.