Isolated Analog Output module, 8 channels, that is configurable for voltage and current. Requires high capacity terminal block IC694TBB032 or IC694TBS032.
Input Type:Voltage, current
Input Channels:16 Channels
Common Mode Voltage, dc to 60 Hz:-6 to +5 V peak
A/D Converter Resolution:16 bits
Input Range:1 0 to 5 V, 1 to 5 V, 0.4 to 2 V, 4-20 mA
Normal Mode Rejection Ratio, at 60 Hz:19 dB
Normal Mode Filter Response:Single-pole RC, -3 dB @ 6.5 Hz
Maximum Normal Mode Input:± 30 Volts
Crosstalk, dc to 60 Hz:-60 dB
Input Impedance (voltage inputs):> 10 M Ω powered
Input Scan Rate:50 ms
Hardware Accuracy (@ CMV = 0 V)
± 0.075% of full-scale (23.5°± 2°C)
± 0.15% of full-scale (0 to 60°C)
Blocking Voltage : 4500V
Maximum Repetitive Off-State Voltage:4500V
Gate Trigger Voltage (VGT): 1.5V–2.5V
Peak Surge Current (ITSM): 25–30kA
Critical Rate of Current Rise (di/dt): 1kA/µs
Turn-On Time (ton): <5µs
Turn-Off Time (toff): <10µs
Switching Frequency: Up to 500Hz
Isolated Analog Output module, 8 channels, that is configurable for voltage and current. Requires high capacity terminal block IC694TBB032 or IC694TBS032.
Number of output channels 32
Rated applied voltage 24 V DC
External power supply rating 24 V DC, 50 mA
Output ON voltage maximumvalue 2 V DC
Output format Current sink
Pulse width 8 ms to 7200 s
PLC RELAY OUTPUT
BASE
Current: 2A to 5A
Voltage: Up to 250V AC/DC or 24V DC
AC: Up to 250V AC, 5A
DC: Up to 30V DC, 5A
Operating Temperature Range -10°C to 60°C
Output Type:4-20 mA
Output Channels:16
Output Temperature Stability ±0.02% Full Scale/°C
Output Readback Accuracy ±4%
Output Current Linearity ± 0.05% nominal
Resolution ± 0.05%
Maximum Output Compliant Voltage:15 V
Maximum Resistive Load:750 Ω @ 20 mA
Input Signal andRaw Signal Voltage Range-1 V to -22 V
Frequency Range 0 to 18750 Hz
Supply Voltage -23.25 V / -26.0 V DC
Maximum Supply Load 35 mA
Supply Gain Accuracy ±3.5%
Supply Offset Accuracy +100 µA / -0 µA
Supply Voltage Reserve + 25 V
Supply Temperature Drift ±50 µA
Series: UFC Series
Voltage Rating: Typically 24V DC
Operating Temperature Range: Typically -20°C to 60°C
Storage Temperature Range: Typically -40°C to 85°C
Humidity: 5% to 95% RH (non-condensing)
Nominal Voltage: 24 V DC
Operating Temperature: 0°C to +70°C (32°F to 158°F)
Storage Temperature: -40°C to +85°C (-40°F to +185°F)
Humidity: 5% to 95% non-condensing
Number of output channels 8 channels, module isolation
Rated output range 4 to 20 mA
Maximum range of guaranteed precision 1.25 to 23 mA
Output range 1.25 to 23 mA
Allowable load resistance @ rated range 230 to 600 Ω
Accuracy ±48 µA
Data update frequency 40 ms
Temperature drift ±16 µA/10 ºC
Digital HART communication
Easiest commissioning and operation
on site due to local operation and auto adjustment
Worldwide Intrinsic Safety approvals
Robust design and flexible in use
with linear and rotary actuators
Remote sensor version
– Advanced vibration resistance 2 g, 300 Hz
– Protection class IP 67
Electronic short circuit protection1
Fast Scan (Priority I/O Module Scan)
Safe-state (FAILOPT) behaviors configurable
on aper channel basis for Digital / Analog Output
HART 7 support (Analog I/O)
HART Modem per Channel for Fast Performance
Extended Temperature Range -40 to +70°C
Operating Voltage:
Typically powered by 24 V DC
AC: Typically 0 to 400 V AC
DC: Typically 0 to 400 V DC
Operating Temperature:
-20°C to +60°C (-4°F to +140°F)
Storage Temperature:
-40°C to +85°C (-40°F to +185°F)
Relative Humidity:
5% to 95%, non-condensing
Number of channels 8
Channel Update Rate 24 mS
Output Range 4 to 20 mA
D/A Resolution 14 bits
Accuracy over Temperature Range 0.25% of Span
Output Loading 4-20mA into 700 ohm load Maximum
