ALL MANUFACTURERS

Two -synchronous- processors
Flash memory for system and applicationprogram
RAM with battery backup (battery located inBKM-0001)
Data comparators for the processors and theirmemory
Minimum and maximum execution timemonitor
Memory error handler
1oo2D functionality
24V and 5V monitoring
Emergency Shut Down Input (24V)
Two outputs (for non-redundant resp.redundant IO)

ACTUATOR

MODUTROL IV MOTOR
NON-SPRING RETURN
FOOT MOUNTED
4-20 MA MODULATING CONTROL SIGNAL
160 DEGREE STROKE
15-30 SECONDS TIMING
8.5 NM / 75 LB-IN TORQUE RATING
15 VA
120 VAC
50/60 HZ

mm Eddy Current Sensor

Linear Measurement Range 2 mm (80 mils)
Initial Air Gap 0.5 mm (20 mils)
Incremental Scale Factor (ISF)
ISO: 8 V/mm (203.2 mV/mil) ± 5%@ 
temperature range 0 to 45°C(+32 to +113°F)
Deviation from best fit straight line(DSL)
± 0.025 mm (± 1 mil)@ 
temperature range 0 to 45°C(+32 to +113°F)
Minimum Shaft Diameter 25 mm (0.79”)

Driver board

Input Voltage Range: Typically 24V DC
Output Voltage Range: Dependent on the connected load 
Current Rating: Up to 10A 
Power Rating: Typically around 240W 
Operating Frequency: 1kHz to 20kHz

IGBT MODULE

INVERTER TRIGGER DRIVER BOARD
PROTECTION
Rated Voltage (V_CE):650V
Rated Current (I_C):70A
Peak Current (I_C_peak):Up to 180A
Power Dissipation:150W to 300W
Switching Frequency:Up to 20 kHz
Thermal Resistance (R_thJC):1.5°C/W to 2.5°C/W
Junction Temperature (T_j):-40°C to 150°C 

SQ Controller

Local Bus Power +5 VDC at 1.4 A
AmbientTemperature-40°C to +70°C
Shock 10g ½ Sinewave for 11msec
Vibration 1mm Peak to Peak from 2 to 13.2Hz
0.7g from 13.2 to 150Hz
AirborneContaminantsISA-S71.04 –1985 
AirborneContaminants Class G3

Transducers Current Sensors

Part Status:Not For New Designs
For Measuring:AC/DC
Current - Sensing:1000A
Frequency:DC ~ 150kHz
Linearity:±0.1%
Accuracy:±0.4%
Voltage - Supply:24V
esponse Time:1µs
Current - Supply (Max):20mA
Operating Temperature:-10°C ~ 70°C

INVERTER ACS850 SERIES ADAPTER BOARD

PC BOARD
INVERTER ACS850 SERIES 
ADAPTER BOARD

Contactor

220-230V 50Hz / 230-240V 60Hz
Model Number: A30-30-10
Rated Operational Current (Ie): 30 A
Rated Operational Voltage (Ue): Up to 690 V AC
Control Voltage: 24-230 V AC/DC
Poles: 3 (3-phase)
Mechanical Life: Up to 10 million operations
Electrical Life: Up to 1 million operations
Enclosure Rating: IP20 

Frequency converter

ACS510-550 Frequency converter 
Model Number: 3X4K7 10028493B
Input Voltage: 3-phase, 380-480 V AC
Output Voltage: 0-480 V AC
Frequency Range: 0-400 Hz
Rated Power: 7.5 kW (10 HP)
Current Rating: 16 A
Enclosure Rating: IP20 (suitable for panel mounting)
Cooling Method: Air-cooled

Main Circuit Interface Board

Manufacturer: ABB
Model: RINT-6512C
Type: Main Circuit Interface Board
Function: Interfaces between control logic and power circuits in drives/inverters.
Voltage Rating: 24V DC
Temperature Range: -20°C to +70°C.
Humidity: Up to 95% (non-condensing).

Driver board

Manufacturer: ABB
Model: RINT-6421C
Type: Driver Board 
Operating Voltage: Typically 24V DC
Current Hadling: Low to moderate 
Isolation: Galvanic isolation for control and power stages
Protection: Over-current, over-voltage, short-circuit protection
Temperature Range: -20°C to +70°C
Humidity: Up to 95% (non-condensing)

FAN

Voltage: 230V AC
Frequency: 50/60 Hz
Current Consumption: Approximately 0.3A
Power Consumption: Around 65W
Airflow: Approx. 280 m³/h (165 CFM)
Speed: 2650 RPM
Noise Level: Approx. 55 dB(A)

Processor board

AC 800M series systems
Voltage Supply: Typically 24 VDC
Operating Temperature Range: -20°C to +60°C
Storage Temperature Range: -40°C to +85°C.
Humidity: 5% to 95%

IGBT Module

Voltage Rating: 1200 V
Current Rating: 450 A
Configuration: Sixpack
Technology: IGBT3 – E3
Package Type: EconoPACK™ + B

VSC power board

1VCR017053G0006
V-Contact VSC contactors
VSC power board

Power Supply Module

AmbientTemp. 0 ~ 55°C
StorageTemp. −25 ~ +70°C
Ambienthumidity 5 ~ 95%RH (Non-condensing)
Peak acceleration: 147m/s2
Duration: 11ms(15G)
Pulse wave type: Half-sine
Square waveimpulse noise ±1,500V
Electrostaticdischarge Voltage: 4kV

memory backup module

C300v5 controller
memory backup module
C300 Memory Backup Assembly
Power Requirements: 24 V DC
Current Draw: 150 mA
Operating Temperature Range: 0°C to 70°C

Open Plant Controller

ComfortPoint™ Open solution 
fully programable 
BACnet-Building Controller (B-BC) 
for AHU, RTU and Central Plant applications
CPO-Studio compatible

CPO-Room Controller

ROOM CONTROLLER
CONTROLPOINT
BACNET
MS/TP
6 ANALOG OUTPUTS
4 RELAYS
4 TRIACS
230 VAC

Actuator Controller

Operating Voltage:24 VAC ± 10%
Power Consumption:15 VA
6 DOs (Triac output, 2 reserved for internal actuator)
Maximum voltage: 24 VAC
Maximum continuous current: 500 mA
Minimum current: 30 mA 
3 AOs, 0 -10 Vdc 
Resolution: 12-bit 

I/O bus in extension cabinet

Type number: FS-IOBUS-CPIOX
Approvals: UL, CSA
Connector (top): 34 pole latch (male)
Connectors (other): 34 pole latch (female)
The IOBUS-CPIOX6 is used for 
connection between controller chassis 
and I/O chassis in position 1,2, 3, 4, 5, and 6.

Power Distribution Board

Type numbers: FS-PDB-IO05
Approvals: CE, UL, TUV, CSA
5V-x: 4 pos, action pin, header
WdPx: 8 pole, pin header
DIN EN rails: TS32 / TS35 × 7.5
Used rail length: 171 mm (6.73 in)

Redundant I/O Module

Input Power:
5 VDC, Max. 2.56 A (1 slot)
Output Power:
24 VDC, Max. 2 A (up to 54 slots)
Operating Temperature:
Maximum surrounding operating temperature: 70°C

Redundant I/O Module

Input Power:
5 VDC, Max. 2.56 A (1 slot)
Output Power:
24 VDC, Max. 2 A (up to 54 slots)
Operating Temperature:
Maximum surrounding operating temperature: 70°C