ALL MANUFACTURERS

CONTROL GATE TRIGGER BOARD

Isolation Voltage: ≥2500V AC
Gate Voltage: +15V/-8V typical
Peak Output Current: ≤10A 
Auxiliary Voltage: 24V DC (±10%) 
Temperature: -10°C to +50°C (derating above 40°C)
Humidity: <95% non-condensing

INVERTER CONTROL POWER BOARD

Voltage: 380–690V AC (±10%), 3-phase
Frequency: 50/60 Hz.
Nominal: 930V DC
Control Circuit Voltage: 24V DC (±15%)
Analog inputs :0–10V, 4–20mA
Temperature: -10°C to +50°C (derate 2% per °C above 40°C)
Humidity: <95% non-condensing

INVERTER CONTROL POWER BOARD

Rated Voltage: 3-phase AC 380–690V
Frequency: 50/60 Hz
Nominal: 930V DC
Temperature: -10°C to +50°C
Humidity: ≤95% non-condensing
Altitude: ≤1000m

Drive Board

Rated Voltage: 520–690V AC
DC Bus Voltage: ~900–950V DC
Frequency Range: 0–400 Hz 
Operating Temperature: -10°C to +50°C
Storage Temperature: -40°C to +70°C.
Humidity: ≤95% non-condensing.
Vibration Resistance: ≤5.9 m/s²

Drive Board

Nominal Voltage: 690V AC (±10%)
Frequency: 50/60 Hz
Temperature: -10°C to +50°C (derating above 40°C).
Humidity: <95% non-condensing.
Altitude: <1000m without derating.
Signaling: I/O integration for drive control 

Frequency converter 690V dedicated power board

Nominal Voltage: 690V AC (±10%)
Frequency: 50/60 Hz
Temperature: -10°C to +50°C (derating above 40°C).
Humidity: <95% non-condensing.
Altitude: <1000m without derating.
Signaling: I/O integration for drive control 

PCB NODE BOARD

Operating Voltage: 24V DC (±5%)
Power Consumption: ≤15W
Operating Temperature: 0°C to +55°C (32°F to 131°F)
Humidity Tolerance: 10–90% non-condensing
Data Rate: Up to 100 Mbps
Memory Flash: 512 MB–1 GB
Memory RAM: 256–512 MB
Digital I/O: 16–24 channels
Analog Inputs: 4–8 channels 

V-NET Coupler Module

Input Voltage: 24 V DC
Power Consumption: Estimated 10–15 W
Operating Temperature: -10°C to +55°C (14°F to 131°F)
Humidity: 5–95% RH (non-condensing)

Vnet/IP COMMUNICATION MODULE

Power Supply:24 V DC
Power Consumption:≤5 W
Operating Temp.:-20°C to +70°C
Humidity:10–90% RH (non-condensing)

POWER SUPPLY MODULE

PW44150
POWER SUPPLY MODULE
FOR V NET POWER
1.4AMP
100-120VAC
50/60HZ

Coupler Module

Impedance: 100 Ω ±15%
Power Supply Input: 24V DC (±10%) 
Power Consumption: ≤5W
Operating Temperature: -40°C to +70°C (-40°F to +158°F)
Humidity: 5–95% non-condensing

ControlNet adapter module

Module Type:I/O Adaptor Module
Power Dissipation:5 Watts
Backplane Current (at 5 Volts):1.0 Amperes
Thermal Dissipation:17.06 BTU/hr
Upper Connector Keying:54-56
Lower Connector Keying:16-18
Operating Temperature:32-140 F (0-60 C)
Storage Temperature:-40-185 F (-40-85 C)

15-inch TFT Display

2711 PanelView Plus 6 Terminal
1500 Model, Keypad/Touch
Color, Standard Communication - Ethernet & RS-232
AC Input, Windows CE 6.0 with Extended Features

COMMUNICATION MODULE

COMMUNICATION MODULE
SIMADYN D CS12
FRAME COUPLING VIA LWL 
1 RECIEVER/TRANSMITTER

POWER SUPPLY MODULE

PW44150
POWER SUPPLY MODULE
FOR V NET POWER
1.4AMP
100-120VAC
50/60HZ

Power Supply Module

Input Voltage:100–120 V AC
Input Frequency: 50/60 Hz 
Maximum Power Consumption: 200 VA
Output Voltage: Typically 24 V DC
Operating Temperature: -10°C to +55°C (14°F to 131°F)
Storage Temperature: -25°C to +70°C (-13°F to 158°F).
Humidity: 5–95% RH (non-condensing)

COUPLER MODULE

Ethernet Ports: 2 ports 
Data Transfer Rate: Up to 100 Mbps
Power Supply Voltage: 24 V DC (±10%)
Power Consumption: 8–12 W
Operating Temperature: -10°C to +55°C (14°F to 131°F)
Storage Temperature: -25°C to +70°C (-13°F to 158°F)
Humidity: 5–95% RH (non-condensing)

Vnet/IP COMMUNICATION MODULE

Power Supply:24 V DC
Power Consumption:≤5 W
Operating Temp.:-20°C to +70°C
Humidity:10–90% RH (non-condensing)

RADIAL VENTIALTOR

RADIAL VENTIALTOR
230VAC
4KW
RH35B2EK

RADIAL VENTILATOR

RADIAL VENTILATOR 
220V 50/60HZ RH28M-2EK
3F HYBRID BEARING

MEMORY MODULE

Input Type: Digital (24 V DC)
Signal Voltage Range: 0-30 V DC
Input Logic: TTL/CMOS-compatible
Isolation: Optocoupler isolation (≤500 V)
Output Type: Transistor (24 V DC) 
Switching Capacity: Up to 2 A per channe

CENTRAL PROCESSING UNIT

CENTRAL PROCESSING UNIT
SIMADYN D PM5
32 BIT
WITH BINARY / ABSOLUTE AND INCREMENT INPUTS
L AND C BUS

VARIABLE FEQUENCY DRIVE

VARIABLE FEQUENCY DRIVE
30HP 380-500VAC
50-60HZ
39AMPS
CHASSIS/PANEL MOUNT

PowerFlex 755 AC DRIVE

AC DRIVE
AIR COOLED
POWERFLEX 755
AC INPUT WITH PRECHARGE
IP20/IP00
OPEN TYPE
400 VAC / 540 VDC
7.5 KW / 10 HP
15.4 AMP
FILTERING
JUMPER INSTALLED
INTERNAL TRANSISTOR

PowerFlex 753 AC DRIVE

AC DRIVE
AIR COOLED
POWERFLEX 755
AC INPUT WITH PRECHARGE
IP20/IP00
OPEN TYPE
400 VAC / 540 VDC
4 KW / 5 HP
8.7 AMP
FILTERING
JUMPER INSTALLED
INTERNAL TRANSISTOR
NO HIM

PowerFlex 753 AC DRIVE

AC DRIVE
AIR COOLED
POWERFLEX 755
AC INPUT WITH PRECHARGE
IP20/IP00
OPEN TYPE
400 VAC / 540 VDC
4 KW / 5 HP
8.7 AMP
FILTERING
JUMPER INSTALLED
INTERNAL TRANSISTOR
NO HIM

PowerFlex 753 AC DRIVE

AC DRIVE
AIR COOLED
POWERFLEX 755
AC INPUT WITH PRECHARGE
IP20/IP00
OPEN TYPE
400 VAC / 540 VDC
2.2 KW / 3 HP
5 AMP
FILTERING
JUMPER INSTALLED
INTERNAL TRANSISTOR
NO HIM

PowerFlex 753 AC DRIVE

AC DRIVE
AIR COOLED
POWERFLEX 755
AC INPUT WITH PRECHARGE
IP20/IP00
OPEN TYPE
400 VAC / 540 VDC
1.5 KW / 2 HP
3.5 AMP
FILTERING
JUMPER INSTALLED
INTERNAL TRANSISTOR
NO HIM

PowerFlex 753 AC DRIVE

AC DRIVE
AIR COOLED
POWERFLEX 755
AC INPUT WITH PRECHARGE
IP20/IP00
OPEN TYPE
400 VAC / 540 VDC
0.75 KW / 1.00 HP
2.1 AMP
FILTERING
JUMPER INSTALLED
INTERNAL TRANSISTOR
NO HIM

PowerFlex 753 AC DRIVE

AC DRIVE
AIR COOLED
POWERFLEX 753
AC INPUT WITH PRECHARGE
IP20/IP00
OPEN TYPE
690 VAC / 932 VDC
250 KW / 335 HP
263 AMP
FILTERING
JUMPER INSTALLED
NO INTERNAL TRANSISTOR

PowerFlex 753 AC DRIVE

AC DRIVE
AIR COOLED
POWERFLEX 753
AC INPUT WITH PRECHARGE
IP20/IP00
OPEN TYPE
600 VAC / 810 VDC
185 KW / 250 HP
242 AMP
FILTERING
JUMPER INSTALLED
NO INTERNAL TRANSISTOR
NO HIM

PowerFlex 753 AC DRIVE

AC DRIVE
AIR COOLED
POWERFLEX 753
AC INPUT WITH PRECHARGE
IP20/IP00
OPEN TYPE
600 VAC / 810 VDC
185 KW / 250 HP
242 AMP
FILTERING
JUMPER REMOVED
NO INTERNAL TRANSISTOR

PowerFlex 753 AC DRIVE

AC DRIVE
AIR COOLED
POWERFLEX 753
AC INPUT WITH PRECHARGE
IP20/IP00
OPEN TYPE
600 VAC / 810 VDC
55 KW / 75 HP
77 AMP
FILTERING
JUMPER REMOVED
INTERNAL TRANSISTOR

PowerFlex 753 AC DRIVE

AC DRIVE
AIR COOLED
POWERFLEX 753
AC INPUT WITH PRECHARGE
IP20/IP00
OPEN TYPE
480 VAC / 650 VDC
300 KW / 400 HP
477 AMP
FILTERING
JUMPER INSTALLED
NO INTERNAL TRANSISTOR
NO HIM

S120 SERIES CIRCUIT BOARD

Voltage: 24 V DC (±10%)
Current Consumption: ≤500 mA
Digital I/O: 24 V DC
Analog Inputs: +/-10 V or 4–20 mA
Operating Temperature: 0°C to +55°C (32°F to 131°F).
Storage Temperature: -40°C to +70°C (-40°F to 158°F).
Humidity: ≤95% RH (non-condensing).
Vibration Resistance: 5–150 Hz, ≤1.5 g

Inverter Triggering Board

Control Circuit: 24 V DC (±10%)
Isolation Voltage: ≥2500 V AC
Output Pulse Voltage: 12–24 V DC
I/O Channels: Digitat inputs (24 V DC)
Power Consumption: ≤15 W
Vibration Resistance: ≤2.5 g (5–150 Hz)

OUTPUT MODULE

OUTPUT MODULE
POINT I/O
DIGITAL
DC
4 POINTS SINKING 24 VDC OUTPUT
ELECTRONICALLY PROTECTED
OPEN STYLE
DIN MOUNTED

Circuit Board

Digital Channels: Configurable for 24 V DC
Analog Inputs: Supports 4–20 mA or 0–10 V
Input Voltage: 24 V DC (±10%) 
Onboard Regulation: 5 V/3.3 V
Operating Temperature: 0°C to +55°C (32°F to 131°F)
Humidity: 5–95% non-condensing.

PCB Board

Digital I/O Channels: 24 V DC
Input Voltage: 24 V DC (±10%)
Analog Inputs: Support 4–20 mA or 0–10 V
Operating Temperature: 0°C to +55°C (32°F to 131°F).
Storage Temperature: -20°C to +70°C (-4°F to 158°F).
Humidity: 5–95% non-condensing.

Stratix Managed Switches

UNMANAGED ETHERNET SWITCH
STRATIX 2000 3+1 PORT
3-PORT 10/100 MBPS COPPER 
(FULL OR HALF DUPLEX) 
AND 1-PORT 100BASE-FX MULTIMODE FIBER 
(LC CONNECTOR)
UNMANAGED
20V AC/ 24V DC POWER

OPERATOR INTERFACE

Part Number/Catalog No.:2711P-K4M5A
Product Line:Panelview Plus 400
Display Size:3.5 inch
Display Color:Grayscale
Input Type:Keypad
Communication:RS-232 Port
Input Power:AC
Memory:64 MB
Series:A, B, C, D, E

POINT I/O Digital DC Sinking Output Module

Series:POINT I/O
Module Type:Digital DC Sinking Output Modules
Outputs:2
Output Voltage:24 Volts DC
Electronically Protected:Yes
POINTBus Current:75 milliamps
Output Current:2 amps/module
Power Dissipation:0.8 Watts
Thermal Dissipation:2.7 BTU/hour

MicroLogix 1500 Base Unit

I/O Rating:2 inputs/ 12 outputs
No. of Inputs:12 inputs
Input Voltage:120 Volts AC
Input channel Voltage:120 VAC
Output Source Relay:Port
No. of Outputs:12 outputs
Max Expanded I/O Count:512
Output channel Voltage:24-125VDC; 120-240VAC
Power Supply Voltage:85-265 VAC

PowerFlex 753 AC Drive

Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:361 Amps, 300HP ND, 250HP HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 7
EMC Filtering Options:Filtered
CM jumper installed (preferred)

PowerFlex 753 AC Drive

Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:361 Amps, 300HP ND, 250HP HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 7
EMC Filtering Options:Filtered
CM jumper installed (preferred)

PowerFlex 753 AC Drive

Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:361 Amps, 300HP ND, 250HP HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 7
EMC Filtering Options:Filtered
CM jumper installed (preferred)

PowerFlex 753 AC Drive

Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:361 Amps, 300HP ND, 250HP HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 7
EMC Filtering Options:Filtered
CM jumper installed (preferred)

PowerFlex 753 AC Drive

Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:302 Amps, 250HP ND, 200HP HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 7
EMC Filtering Options:Filtered, 
CM jumper installed (preferred)
Dynamic Braking:DB Transistor

PowerFlex 753 AC Drive

Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:302 Amps, 250HP ND, 200HP HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 7
EMC Filtering Options:Filtered, 
CM jumper installed (preferred)
Dynamic Braking:DB Transistor

PowerFlex 753 AC Drive

Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:302 Amps, 250HP ND, 200HP HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 7
EMC Filtering Options:Filtered, 
CM jumper installed (preferred)
Dynamic Braking:DB Transistor