Points:16, commoned
Nominal output voltage:24 VDC
Specified operational voltage range:15 to 30 VDC
Absolute maximum output voltage:33 VDC
Absolute maximum reverse input voltage:– 0.6 VDC
Leakage to load (Off state):<1 mA
Diagnostic glitch duration <2 ms, maximum:500 Ps, typical
On state voltage drop:<1.0 VDC @ 1.5 A
I/O Channels: 4–20 mA
Scalability: 8–16 I/O points per module
Data Transfer Speed: Up to 100 Mbps
Voltage: 18–32 VDC
Current Draw: <2 A typical
Operating Temperature: –40°C to +70°C
Storage Temperature: –50°C to +85°C
Humidity: 5–95% RH (non-condensing)
Slots: 1–2 x SODIMM slots
Capacity: Up to 16–32 GB
Chipset: Intel H110/Q170 or AMD
Network:2–4 x Gigabit Ethernet
Power Input:12–24 V DC
Wide operating temperature:(-40°C to +85°C with proper airflow)
Humidity tolerance: 5–95% (non-condensing)
RX3I NIU WITH TWO SERIAL PORTS
20K OF LOCAL LOGIC
MODULE REQUIRES UNIVERSAL BASE (IC695CHSXXX)
REQUIRES ETHERNET MODULE (IC695ETM001)
NIU SUPPORTS ALL RX3I I/O MODULES
Communication Protocol:Modbus TCP/IP, DeviceNet
Data Rate:Up to 1 Mbps
Power Consumption:L ess than 4W
Operating Temperature:-40C to +70°C
Mounting Type:Panel Mount
INTERFACE BOARD
SMC FLEX INTERFACE PCB BOARD
FOR SOFTSTART
Input Voltage:24V DC
Communication Ports:RS-485, EtherNet/IP
Current/Power Ratings:5A at 240V AC
Analog I/O: Standard 0-10V
ACS880-04 drives
3AXD10000497831
LV AC industrial single drive module
IEC: Pn 500 kW, 715 A, 500 V
UL: Pld 600 Hp, 705 A, 460 V
Number of Phases:3-phase
Enclosure Type NEMA:Open Type
Operating Humidity (RHamb):5 ... 95
Sound dB (A):72 dB(A
Frequency (f): 47.5 ... 63 Hz
Frame Size: R11
Input Voltage (Uin):380 ... 500 V
MotiFlex e180
MFE180-04AN-05A0-4+L518+N8020
3P, 380 VAC
IN: 5 A, HALL incremental encode
A free Mint programming license
easy positioning tasks
drive supports various feedback types
LV AC machinery drive module
IEC: Pn 3 kW, 8 A, 400 V
UL: Pld 5 Hp, 7.6 A, 480 V
(ACS880-M04-08A0-5)
Number of Phases:3-phase
Degree of Protection:IP20
Enclosure Type NEMA:Open Type
Altitude:1000 m
Operating Humidity (RHamb):5 ... 9
Power Factor:0.98
Sound dB (A):47 dB(A)
Output Power: 1.1 kW
Output Voltage: 380–480 V AC, 3-phase ±10%
Continuous current: 4.5 A (at 40°C)
Dynamic peak current: Up to 7.0 A
Input Voltage: 3-phase 380–480 V AC
Input Current (Typ.): 4.6 A @ 480 V AC
Supply Voltage: 24 V DC
Power Consumption: ≤ 5 W
Isolation Voltage: 500 V AC
Voltage range: 0–30 V DC
Logic thresholds: ≤ 5 V DC
Ethernet/IP: TCP/IP, IPv4,
Normalizing module
ABO for devices 660-690 V
3 AC and 890-930 V DC
82 A
Input Voltage (DC Link): 890–930 V DC
Rated Braking Current: 82 A continuous
Compatible AC Line Voltage Range: 660–690 V
Mains Connection Terminals: 3-phase AC supply
Siemens MM440 Inverter
Voltage Range: 3-phase 380–480V AC (±10%)
Current Rating:up to 200A
Power Output: 0.37 kW to 250 kW
Switching Frequency: 2–16 kHz
Communication Interfaces: 0–10V, 4–20mA
allocation board
with functional safety A5E42928536
Supply Voltage: 24V DC (±15%)
Power Consumption: ≤5W
Operating Current per Channel: 100 mA
Isolation Voltage: 500V AC
Operating Temperature: -20°C to +60°C
Relative Humidity: ≤95%
Layer 2, 11 bit and 29 bit (CAN 2.0A/B)
CANopen® master on the module
DIP switches for address + transfer rate
Memory card for project backup (optional)
USB interface for parameterization and diagnostics
Extensive CAN bus diagnostics possibilities
Can also be used as CANopen® slave
Extended ambient temperature
AC Input: 380–480 VAC
DC Input:500–750 VDC
Output Charging Voltage: 24/48/110 VDC
Range: 10–50 A
Current Accuracy: ±1%
Efficiency: ≥92% under full load
Full performance: -10°C to +50°C
Humidity: ≤95% RH (non-condensing)
RS-485 or CAN Bus
Modbus RTU/TCP compatibility
Overvoltage/Undervoltage Protection
Overcurrent Protection
Short-Circuit Protection
Temperature Monitoring with automatic derating
