Output Channels 32
Output Type Source
Load Voltage 15 30 VDC Maximum
On-State Voltage 24 V (typ), load current @ 0.5A
Off-State Leak Current 5.0 µA (max)
Turn-On/Turn-Off Time 10 ms (max)
Inputs per module:32 (sinking)
Input Voltage Range:10 VDC to 32 VDC
Peak Voltage:32 VDC
AC Frequency: N/A
ON Voltage Level:9.5 VDC minimum
OFF Voltage Level:3.5 VDC maximum
Input Impedance:6.9 K ohms nominal
Minimum ON Current:1.0 mA
Maximum OFF Current:0.7 mA
Approvals: UL, CSA; FM pending
Type: CC 600 World 4 × 2.5 mm2
Bus bar side: 2 pole Squeeze To
Release type: D-TAB-200-STR
IO chassis side: FM5W5 S (female)
housing: low profile, 90°
The red wire represents the +24Vdc
The black wire represents the 0Vdc
Approvals: UL, CSA; FM pending
Housing type: 2 pole socket block
Weidmuller BLZ 5.08/2F
Crimp pin type: Weidmuller
DFFC 1.5-2.5 SN E
POWER BUSBAR MAX.200A 24/48/110VDC,150CM
Nominal Voltage:24 Vdc, 48 Vdc, 110 Vdc
Max Current:200 A continuous
Length:1,500 mm (150 cm)
Bus Sections 10 sections 152.4 mm each
Approvals:UL, CSA, FM‑pending
Power Supply Inputs:Dual 5V DC (5V-1 and 5V-2)
Power Consumption:0.05 A per 5V input rail
Chassis Width:482.6 mm (19 inches)
Operating Temperature:0°C to +50°C
Storage Temperature:-40°C to +70°C
Relative Humidity:5% to 95% non-condensing
Form Factor: 19-inch standard rack width
Slot Capacity: 21 slots for I/O module
Voltage: 24 V DC (±10%)
Humidity: 5–95% RH (non-condensing).
Vibration: 5–500 Hz, 2 g RMS (IEC 60068-2-6).
Shock: 30 g peak, 11 ms
Supply Voltage:24 V DC ±10%
Power Consumption:≤5 W
Isolation :500 V AC
I/O Channels:Likely 8–16
Function:Fieldbus interface or signal conditioning
Status:Discontinued
Voltage: Typically 24 VDC (±10%)
Power Consumption: <5–10 W
Digital Inputs: 8–16 channels
Analog Inputs: 4-20 mA/0-10 V
Temperature Range: -20°C to +70°C
