Series: Mark VIe
Number of channels: 8
Analog output current: 0-20 mA
Customer load resistance: Up to 900 Ω
Size: 15.9 cm high x 10.2 cm wide
Operating temperature: -30 to 65oC
Technology: Surface mount
IS220PDOAH1A
DISCONTINUED BY MANUFACTURER
I/O MODULE
Number of Channels: 24
Inputs: 125 V dc, 15A
Input Impedance: 4-20 mA
Input Converter Resolution: 16-bit A/D Converter
Product Type: Proportional Digital Output Module
Output Fuses 12 fuses: 250 Volt, 15 A
Series:Rx7i PACsystem
Part Number:IC698ACC701
Description:Auxiliary Smart Battery Module
Application:RX7i System
Max Current Rating:15.0 Amps
Battery Content:5.1 Grams Lithium
Manufacturer:GE Fanuc
Series:Field Control
Part Number:IC670MDL241
Product Type:Input Module
Number of Inputs:16
Number of Input Groups:2
Voltage Type:AC
Module Type:Network Slave Module
Number of Stations:32 w/out repeaters,
up to 125 with
I/O Data: 384 Bytes
Connector:9-pin D-sub
Network Data Rate: 9.6 Kbaud to 12 Mbaud
Power Consumption: 460 mA from 5 V output
Series:Series 90-30
Manufacturer:GE Fanuc
Part Number:IC693CMM311
Product Type:Communications Coprocessor Module
RS-232 Applications:Supported
Mounting:Baseplate mounted
Module Location:CPU baseplate only
Status LED indicators:Module OK; PORT1; PORT2
LED indicators:Module OK; US1; US2
Current load:400 mA
Bus voltage:+5VDC
No. of CMM module per baseplate:4
Part Number:IC200PWR102
Series:VersaMax
Input Voltage, range:85-132 VAC; 176 - 264 VAC
Input Voltage:120/240 Volts AC
Product type:Expanded Power Supply
Output current, Total:1.5 A, maximum
Input frequency:47-63 Hz
Output Voltage:5 Volts DC and 3.3 Volts DC
Output Voltage:5 VDC; 3.3 VDC
input voltage, nominal:120 VAC; 240 VAC
Total output current:1.5 Amperes
Input Power:27 VA
Input frequency:47-63 Hz
Output current at 3.3 VDC:1.0 A, maximum
Holdup Time:20 ms
Input power:27 VA
Output current at 5VDC:1.5 A, maximum
Total Output Current:1.5 Amperes Maximum
Holdup time:20 ms
Output voltage:5.5 VD; 3.3 VDC
Series: Mark V LM
Operating temperature: -30 to 65 ºC
Power Supply Voltage: 28 V dc
Board Size: 23.8 cm high x 8.6 cm
Weight: 0.45 kg
Number of inputs: 6
Number of outputs: 2
Current-limited +24 V DC output.
Standard +24 V DC power supply
Current input 4-20 mA circuits
Operating Temperature: 0°C to 60°C.
Storage Temperature: -40°C to 85°C.
Humidity: 10% to 95% RH (non-condensing)
POWER QUALITY METER
20-60VDC/20-48VAC
50/60HZ
20VA
ONE 4 TO 20 MA ANALOG INPUT
FOUR (4) OUTPUT RELAYS / FOUR (4) SWITCH INPUTS
FOUR (4) ISOLATED ANALOG OUTPUTS SETPOINTS
FOR ALARM OR CONTROL
MODBUS COMM 2 REAR RS485
PORTS 1 FRONT RS232 PORT
9907014
SPEED CONTROLLER
2301A
FORWARD ACTING
4-20 MA
1-5 VDC
SUPPLY VOLTAGE 10-40 VDC
SPEED SENSING 1 TO 30 VDC
SIGNAL TO ACTUATOR 0 TO 200 MA
FOR DIESEL OR GAS ENGINE
FOR STEAM OR GASE TURBINE
Range:-10 to +10 V, 0 to 10 V
Part Number:IC693ALG222
Series:Series 90-30
Brand:GE Fanuc
Input Types:Unipolar and bipolar
Product Lifecycle Status:Discontinued/Obsolete
Product Description:Analog Voltage Input
Linearity:< 1 LSB
No of Channels:16
Update Rate:13 ms for all channels
