ALL MANUFACTURERS

Communications Cable

Communications Cable Assembly
From Communication Interface (T8151) to flying leads
Impedance: 100–120 Ω (for twisted-pair cables).
Voltage Rating: 300 V AC/DC (typical).
Data Rate: Up to 1 Gbps
Operating Temperature: -40°C to +85°C

EXPANDED MODULE TRUSTED FIBRE TX RX UNIT

Voltage: 100–240V AC (auto-ranging), 50/60 Hz.
Current: 10A (max at 100V AC)
Efficiency: ≥90%
Operating Temperature: -20°C to +70°C
Humidity: 5–95% non-condensing

Expander Processor

2 x 30 mm (1.2 in) Trusted Expander Processor Slots
12 x 30 mm (1.2 in) single width Trusted I/O Module Slots.
No user-serviceable parts inside.
Fast assembly.
Minimum tooling/parts.
32, 48, 64 and 96-way 
DIN 41612 I/O port connector capability
Cable entry options.
Convection cooling of modules through the Chassis

Motor Control Board

Digital Inputs:24 Vdc
Analog Inputs: 0–10 V / 4–20 mA
Operating Temperature: -10°C to +50°C
Humidity: 5–95% non-condensing
Voltage: 24 Vdc (±10%) 
Consumption: ≤ 10 W 
Standards: CE, UL, cUL, RoHS

PCB Board

Operating Voltage: 24 Vdc (±10%).
Data Rate: 100 Mbps
Operating Temperature: -40°C to +70°C
Humidity: 5–95% non-condensing

Frequency Converter Board

IGCT MODULE
4500V
91MM
ALT PART NUMBER: 5SHY 3545L0016
DC Bus Voltage: 510–930 V DC
Output Current: Up to 600 A
Operating Temperature: -10°C to +50°C 
Humidity: 5–95% non-condensing

Interconnect cable

Standard ArmoredInterconnect Cable
Stainless steel armor 
overshielded 0.382 mm2 (22 AWG)
cable with a moistureresistant 
female connector atthe transducer end 
and ringlugs at the monitor end.
Temperature range -29 to121°C (-20 to 250°F)

SYNCHROTACT 4 multi motor

ABB SYNCHROTACT 4 multi motor 
Voltage Inputs: 3-phase AC, 110–690 V
Frequency Range: 45–65 Hz
Frequency Matching: Precision ±0.01 Hz
Voltage Matching: ≤ ±1% deviation
Operating Temperature: -25°C to +55°C

Frequency Converter Power Board

Input Voltage Range: 230 V AC to 690 V AC
Frequency Range: 0–300 Hz
Efficiency: ≥ 98% under standard load conditions
Operating Temperature: -10°C to +55°C
Storage Temperature: -40°C to +70°C
Humidity: 5% to 95% (non-condensing)

ACS880 frequency converter drive board

ACS880 frequency converter drive board
Operating Voltage:  24 Vdc
Analog Inputs: 0–10 V or 4–20 mA
Operating Temperature: -10°C to +50°C
Humidity: 5–95% non-condensing

Compact alternating current drives

Output Power: 160 kW (215 HP) at 400 V AC.
Output Current: 302 A 
Input: 380–480 V AC, 3-phase (±10%), 50/60 Hz.
Output: 0–480 V AC
Efficiency: ≥97% (typical at full load)
Control I/O: 5x analog inputs (2x 0–10 V / 0–20 mA)
Switching Frequency: 1–8 kHz 

VME Communications Board

Functional Abbreviation:VCMI
Indicator LEDs:Run, Fail, Status, Reset
Instruction Manual:GEH-6421
OEM:GE Energy
Series:Mark VI Control System
Part Number:IS215VCMIH2C
Product Type:VME Communication Card

3300 NSv Proximity Probes

3300 NSv Probe
M10 x 1 thread, withoutarmor 
0 5 0.5 metre (20 in)
0 2 Miniature coaxial ClickLocconnector
standard cable
0 5 Multiple Approvals

3300 NSv Proximity Probes

3300 NSv Probe
1/4-28 UNF thread, withoutarmor
1 0 1.0 metre (39 in) 
0 2 Miniature coaxial ClickLocconnector
standard cable
0 5 Multiple Approvals 

3300 XL 11 mm Probe

3300 XL 11 mm Probe
M14 x 1.5 thread, witharmor 
5 0 5.0 metres (16.4 feet)
0 2 Miniature coaxial ClickLocTMconnector
standard cable
0 0 Not required 

3300 XL 8 mm Probe

3300 XL 8 mm Probe
3/8-24 UNF thread,without armor
1 0 1.0 metre (3.3 feet) 
0 2 Miniature coaxial ClickLocTMconnector
standard cable 
0 0 Not required 

3300 XL 8 mm Probe

3300 XL 8 mm Probe
M10 x 1 thread, witharmor
5 0 5.0 metres (16.4 feet) 
0 2 Miniature coaxial ClickLocTMconnector, 
standard cable 
0 0 Not required 

3300 XL 11 mm Proximity Probes

3300 XL 11 mm Probe
M14 x 1.5 thread,without armor
5 0 5.0 metres (16.4 feet) 
0 2 Miniature coaxial ClickLocTMconnector
standard cable 
0 0 Not required 

3300 XL 11 mm Proximity Probes

3300 XL 11 mm Probe
M14 x 1.5 thread, witharmor
9 0 9.0 metres (29.5 feet) 
0 2 Miniature coaxial ClickLocTMconnector
standard cable 
0 5 Multiple Approvals

3300 XL 8 mm Proximity

3300 XL 8 mm Probe
M10 x 1 thread, witharmo
1 0 1.0 metre (3.3 feet) 
0 2 Miniature coaxial ClickLocTMconnector
standard cable 
0 5 Multiple Approvals 

Digital Input Module

PC BOARD
LOGIC CARD
NON-REDUNDANT
IOTA
9 INCH

Analog Input Termination Unit

Input Types: Supports 4–20 mA, 0–20 mA, 0–10 VDC
Channels: Typically 8 or 16 channels
Resolution: 16-bit ADC
Supply Voltage: 24 VDC (±10%)
Power Consumption: 2–5 W 
Operating Temperature: -20°C to +70°C (-4°F to +158°F)
Storage Temperature: -40°C to +85°C (-40°F to +185°F)
Humidity: 5–95% non-condensing

GATE DRIVE BOARD

Input Voltage: 24 VDC (±10%) 
Analog Inputs: 0–10 VDC / 4–20 mA
Fieldbus Support: PROFIBUS DP
Operating Temperature: -25°C to +55°C (-13°F to +131°F).
Humidity: 5–95% non-condensing

PCB CARD

Input Voltage: 24 VDC (±10%) 
Analog Inputs: 0–10 VDC / 4–20 mA
Fieldbus Support: PROFIBUS DP
Operating Temperature: -25°C to +55°C (-13°F to +131°F).
Humidity: 5–95% non-condensing.

PCB CARD

Input Voltage: 24 VDC (±10%) 
Analog Inputs: 0–10 VDC / 4–20 mA
Fieldbus Support: PROFIBUS DP
Operating Temperature: -25°C to +55°C (-13°F to +131°F).
Humidity: Up to 95% non-condensing

PCB CARD

Input Voltage: 24 VDC (±10%) 
Analog Inputs: 0–10 VDC / 4–20 mA
Fieldbus Support: PROFIBUS DP
Operating Temperature: -25°C to +55°C (-13°F to +131°F).
Humidity: Up to 95% non-condensing

Control Card

Input Voltage: 24 VDC (±10%)
Analog Inputs: 0–10 VDC or 4–20 mA
Operating Temperature: -25°C to +55°C (-13°F to +131°F)
Humidity: Up to 95% non-condensing.
Vibration Resistance: 5–150 Hz

Drive board

Input Voltage: 24 VDC (±10%)
Analog Inputs: 0–10 VDC or 4–20 mA
Operating Temperature: -25°C to +55°C (-13°F to +131°F).
Humidity: Up to 95% non-condensing.
Vibration Resistance: 5–150 Hz

PHASE INTERFACE BOARD

RAM: Typically 512 MB to 1 GB
Supply Voltage: 24 VDC (±10%).
Power Consumption: Typically 5–10 W
Operating Temperature: -20°C to +70°C (-4°F to +158°F).
Storage Temperature: -40°C to +85°C (-40°F to +185°F).
Humidity: 5–95% non-condensing

Control board

RAM: Typically 512 MB to 1 GB 
Flash Memory: 2–4 GB
Supply Voltage: 24 VDC (±10%).
Power Consumption: Typically 5–10 W
Operating Temperature: -20°C to +70°C (-4°F to +158°F).
Storage Temperature: -40°C to +85°C (-40°F to +185°F).
Humidity: 5–95% non-condensing

ControlLogix Integrated Motion module

Gain Resolution:32- bit floating point
Servo output Type:Analog Voltage
Voltage Range:±10V dc
Analog output resolution 16 bits
Discrete outputs:Solid-state isolated relay contacts
Discrete output operating voltage:24VDC, Nominal.
Axes per Module:2
Axes per Controller:32
Backplane Current (5Volts):700 milliamps
Backplane Current (24Volts):2.5 milliamps

ControlLogix Discrete output module

Outputs:8
Module Type:Digital AC Output Module
Voltage:120-240 Volts AC
Voltage Category:120 / 240 Volts AC
Operating Voltage Range:74-265 Volts AC
Current per point:0.5 A @ 60 °C (140 °F)
Current per group, max:2 A @ 60 °C (140 °F)
Backplane Current at 5 Volts:200 mA
Isolation Voltage:50 Volts Continuous
Power Dissipation:(Max) 5.1 W @ 60 °C (140 °F)
Backplane Current at 24 Volts:2 mA

SIL 3 PLe Safety Partner

PLC CONTROLLER
GUARDLOGIX
SAFETY PARTNER
EXTREME ENVIRONMENT
CHASSIS MOUNT
-25 TO 70 DEGREES C

ControlLogix Processor Module

Series:ControlLogix
Module Type:Processor Module
I-O Memory:0.98 MB
User Memory:8 MB
Maximum I-O:128,000
Maximum Analog I-O:4,000
Maximum Digital I-O:128,000
Current Draw (1.2 Volts DC):5 milliamps
Current Draw (5.1 Volts DC):800 milliamps
Power Dissipation:2.5 Watts
Thermal Dissipation:8.5 BTU per hour
Isolation Voltage:30 Volts Continuous

GuardLogix Controller

Series:ControlLogix
Module Type:GuardLogix Controller
I-O Memory:0.98 MB
User Memory:4 MB
Maximum I-O:128,000
Maximum Analog I-O:4,000
Maximum Digital I-O:128,000
Current Draw (1.2 Volts DC):5 Miliamperes

ControlLogix Processor Module

Series:ControlLogix
Module Type:Processor Module
I-O Memory:0.98 MB
User Memory:2 MB
Maximum I-O:128,000
Maximum Analog I-O:4,000
Maximum Digital I-O:128,000
Current Draw (1.2 Volts DC):5 Miliamperes

GuardLogix Controller

Series:ControlLogix
Module Type:GuardLogix Controller
Current Draw (1.2 Volts DC):5 milliamps
Current Draw (5.1 Volts):802 milliamps
Power Dissipation:2.5 Watts
Thermal Dissipation:8.5 BTU per hour
Isolation Voltage:30 Volts Continuous

ControlLogix Processor Module

Series:ControlLogix
Module Type:Processor Module
I-O Memory:0.98 MB
User Memory:32 MB
Maximum I-O:128,000
Maximum Analog I-O:4,000
Maximum Digital I-O:128,000
Current Draw (1.2 Volts DC):5 milliamps
Current Draw (5.1 Volts):800 milliamps
Power Dissipation:2.5 Watts
Thermal Dissipation:8.5 BTU per hour
Isolation Voltage:30 Volts Continuous

GuardLogix Controller

Module Type:GuardLogix Controller
I-O Memory:0.98 MB
User Memory:9 MB
Maximum I-O:128,000
Maximum Analog I-O:4,000
Maximum Digital I-O:128,000
Current Draw (1.2 Volts DC):5 Miliamperes
Current Draw (5.1 Volts DC):800 Miliamperes
Power Dissipation:2.5 Watts
Thermal Dissipation:8.5 BTU per hour
Isolation Voltage:30 Volts Continuous

Armor ControlLogix Controller

Standard Memory:4 Megabytes
I/O Memory:0.98 Megabytes
Max Total I/O:128,000
Max Analog I/O:4000
Max Digital I/O:128,000
Ethernet Ports:4 Ethernet M12 Category 5E
USB Ports:USB 1.1 Full Speed (12 Mbps)
Nom Input Voltage:24 Volts DC
Input Voltage Range:18-32 Volts DC
Enclosure Type:UL Type 4/4x

PowerFlex 753 AC Drive

Bulletin Number:PowerFlex 753 AC Drive, 
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:186 Amps, 150HP ND, 125HP HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 6
EMC Filtering Options:Filtered, 
CM jumper installed (preferred)
Dynamic Braking:DB Transistor

PowerFlex 753 AC Drive

Bulletin Number:PowerFlex 753 AC Drive, 
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:186 Amps, 150HP ND, 125HP HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 6
EMC Filtering Options:Filtered, 
CM jumper installed (preferred)
Dynamic Braking:DB Transistor

PowerFlex 753 AC Drive

Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:186 Amps, 150HP ND, 125HP HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 6
EMC Filtering Options:Filtered
CM jumper installed (preferred)
Dynamic Braking:DB Transistor

PowerFlex 753 AC Drive

Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:156 Amps, 125HP ND, 100HP HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 6
EMC Filtering Options:Filtered, 
CM jumper installed (preferred)
Dynamic Braking:DB Transistor

PowerFlex 753 AC Drive

Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:156 Amps, 125HP ND, 100HP HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 6
EMC Filtering Options:Filtered, 
CM jumper installed (preferred)
Dynamic Braking:DB Transistor

PowerFlex 753 AC Drive

Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:125 Amps, 100HP ND, 75HP HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 6
EMC Filtering Options:Filtered
CM jumper installed (preferred)
Dynamic Braking:None
HIM Blank (No HIM)

PowerFlex 753 AC Packaged Drive

Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:125 Amps, 100HP ND, 75HP HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 6
EMC Filtering Options:Filtered
CM jumper installed (preferred)
Dynamic Braking:None
HIM Blank (No HIM)

PowerFlex 753 AC Packaged Drive

Manufacturer:Rockwell Automation
Brand:Allen-Bradley
Part Number/Catalog No.:20F1ANC477JN0NNNNN
Series:PowerFlex 753
Frames:6...8
Enclosure Type:AC Input w/Precharge, no DC Terminals
Frames:2 2...7
Enclosure Type 2:IP20/IP00, NEMA/UL Type Open
Voltage:400V AC/540V DC
Filtering:Yes
Default CM Cap Connection:Jumper Installed

Touch Screen Panel

Model: TPC1062K
Input voltage: DC24V (V) V
Display type: TFT LED LCD backlight
Working temperature: 0-45 C
Custom processing: no
Model: TPC1062K
Processor: ARM CPU 400MHZ
Display size (inches): 10.2 in

INRUSH CURRENT REDUCTION MODULE

ICRM7
INRUSH CURRENT REDUCTION MODULE
90-277VAC/50-400HZ INPUT
9AAC INPUT