Power Consumption: 7.0 Watts, typical
External transducerPower+24 Vdc +4
-2 Vdc @ 1.8 AMinimum
Voltage +5 Vdc typica
Current 0.4 mA typical, 4 mA peak
OperatingTemperature:-30°C to +65°C
Product Type:FLEX Ex RTD Thermocouple I/O Module
Inputs:8
Input Type:Internal Bus Configurable
Signal Input Range:40 to 100 millivolts
Lead Resistance Compensation:15 Watts maximum
Settling Time:8 milliseconds
Module Field-side Power Consumption:1.6 Watts
Power Dissipation:1.6 Watts
Thermal Dissipation:5.46 BTU/hour maximum
Power Supply:9.5 Volts DC
C300v5 controller
memory backup module
C300 Memory Backup Assembly
Power Requirements: 24 V DC
Current Draw: 150 mA
Operating Temperature Range: 0°C to 70°C
Operating Voltage:24 VAC ± 10%
Power Consumption:15 VA
6 DOs (Triac output, 2 reserved for internal actuator)
Maximum voltage: 24 VAC
Maximum continuous current: 500 mA
Minimum current: 30 mA
3 AOs, 0 -10 Vdc
Resolution: 12-bit
Type number: FS-IOBUS-CPIOX
Approvals: UL, CSA
Connector (top): 34 pole latch (male)
Connectors (other): 34 pole latch (female)
The IOBUS-CPIOX6 is used for
connection between controller chassis
and I/O chassis in position 1,2, 3, 4, 5, and 6.
Power supply 24V DC
Rated Current 55mA at 24V
Power dissipation 1.22W at 24V DC with
20mA loop current & 250 Ohm load
Power Indication Green LED
Power/DCS to Field 1500 VAC
Voltage Input 24V DC
Interface to DCS 4 to 20mA with HART
Transfer accuracy at 200C +/- 20uA
Output Channels 16
Output Ripple < 100 mV peak-to-peak at
power line frequency, across 250 load
Output Temperature Drift 0.005% of Full Scale/°C
Output Readback Accuracy ±4% of Full Scale
Output Current Linearity ± 0.05% of Full Scale nominal
Resolution ± 0.05% of Full Scale
Calibrated Accuracy ± 0.35% of Full Scale (25oC) including linearity
Output Current Range 0 mA, 2.9 mA to 21.1 mA
IE/PB link PN IO
gateway between Industrial Ethernet and PROFIBUS
PROFINET IO proxy with real-time communication
time-of-day synchronization viaSIMATIC processes
NTP, SNMP v1, LLDP
S7 routing, data record routing
connection of up to 64 S7/DPV0/DPV1 slaves
support of DP/PA link and DP/FFlink
10/100 Mbit/s fast Ethernet, MRP
9.6 Kbit/s up to 12 Mbit/s PROFIBUS
firmware loading via configuration tool
redundant power supply
firmware versionV4.0.
Diode Matrix: -10V> +10V
Current measurements: 4-20mA
Temperature measurements: NTC probe
Operating temperature -20 to +70˚C (-4 to 158˚F)
Storage temperature -40 to +85˚C (-40 to 185˚F)
ON state Voltage, min:6VDC
ON state Voltage, max.26.4VDC
ON state Voltage, nom:24VDC
Enclosure:Open-type
Operating Temperature:0 to 55 C (32 to 131 F)
Storage Temperature:-40 to 85 C (-40 to 185 F)
Vibration: 5g @ 10 to 500 Hz
Operating Shock:30 g
Product Type:Flex I/O 4 Channel Pulse Counter Module
Inputs:2 per Interface
Pulse Counter Interfaces:4
Part Number:1794-IF8IH
Outputs:None
Inputs:8
Input type:single-ended, non-isolated
Operating temperature:32 to 131 degrees Fahrenheit
Enclosure:Open
Conversion:Sigma Delta
Dimensions:3.7 x 3.7 x 2.6 inches
External DC voltage rating:19.2 to 31.2 Volts DC
Series:Compact 5000 I/O
No. of Outputs Eight (8) DC output channels
Output Voltage signal, nominal:24VDC
Output Voltage Signal range:10-32VDC
Pulse width, min:200 µs @ 0.5 A @ 25 °C (77 °F)
No. of output groups:Two (2)
Number of Outputs:8 (2 Groups of 4) Channels
Voltage Category:24 Volts DC
Input Voltage Range:N/A
Output Voltage Range:10-32 Volts DC
Power Dissipation:3.2 Watts
Product Type:Programmable Automation Controller
Module Type:Processor Module
Communication:Ethernet
Communication ports:(1) USB; (2) Ethernet I/P; 1 RS232
Supported Protocols:ASCII; DH485; DF1; Ethernet
No. Of Axes over Ethernet:2 axes
Shipping Weight:3 pounds
No. of Task:32 Task
Shipping Dimensions:11X8X6 inches
No. of Program per Task:100
Series:A and B
Product Line:CompactLogix
Product Type:Programmable Automation Controller
Module Type:Processor Module
Communication:Ethernet
Communication ports:2 Ethernet I/P; 1 USB
Motion Control over Ethernet I/P:Included
Integrated Motion:4 Axes
Memory:1MB
Shipping Weight:3 lbs.
Maximum number of I/O modules supported:8 Modules
MICROMASTER 440 WITH BUILT-IN CLASS A FILTER3AC
380-480 V +10/-10% 47-63
HZ CONSTANTTORQUE POWER 3 KW
OVERLOAD 150% 60 S,200% 3 S
SQUARED TORQUE POWER 3 KW
202 X149 X 172 (H X W X D)
PROTECTION IP20
AMBIENTTEMP. -10 TO +50 DEG. C
WITHOUT AOP/BOP
Series:ControlLogix
Module Type:Isoloated Analog Output Module with current loop
Outputs:6-Point Isolated
Backplane Current (5Volts):250 milliamps
Backplane Current (24 Volts):300 milliamps
Power Dissipation (Max):4.9 Watts at 60 Celsius
Number or ports:2; 1 (RS232); 1 Ethernet I/P
Ports:RS-232
Protocol:DF1 Full-Duplex; Ethernet
Ethernet Transmission speed:Series A and B: 10 mbps Series C and D: 10/100 mbps
Safety Feature:Master Control Relay
Mounting:DIN Rail or Panel
Power Supply: 20.4 to 26.4V dc
24 Volts DC Current Draw:50 mA typical, 100 mA maximum
Item weight:1 pound
Product Type:Isolated Serial Port
Mounting Torque:0.2 Nm
Terminal Screw Torque:0.22-0.25 Nm
Isolated Voltage:500V AC
Surrounding Air Temperature max:65* C
Power Supply: 24 VDC
Power Consumption: 3.5 W
Operating Temperature Range:
-40°C to +65°C (-40°F to +149°F)
Storage Temperature Range:
-40°C to +70°C (-40°F to +158°F)
Relative Humidity: 0 to 100% RH
Supply Voltage:85-250 VAC V ; 9-32 VDC V
Temperature Operating Range:0 to +50 °C °C
Termination:Screw
Pulse Rate (Frequency) - Analog Converter
Output Type:Current, Voltage
