Transmission Media: Optical Fiber
Modulation Type: 4B3T
Data Transmission Rate: Up to 2.5 Mbps
Fiber Optic Ports: 1 or 2
Electrical Interface: RS-232 or RS-485
Power Supply: 24 V DC ±20%
Operating Temperature Range: -40°C to +70°C
Storage Temperature Range: -40°C to +85°C
Relative Humidity: 5% to 95% (non-condensing)
MULTI-AXIS CONTROLLER
FOR SERVO AND STEPPER MOTORS
3 SERVO AXES / 4 STEPPER AXES
DIFFERENTIAL STEPPER OUTPUT TYPE
2 EXTRA ENCODER INPUTS
RS232
SAME FIT/FORM/FUNCTION AS NSB202-501
Voltage: ±10 V, 0–10 V, or 4–20 mA signals.
Voltage: 0–10 V or ±10 V.
Current: 4–20 mA, configurable
Power Supply: +24 VDC
Operating Temperature: 0°C to 50°C .
Storage Temperature: -20°C to 70°C.
Relative Humidity: 5% to 95% (non-condensing).
Number of Channels: Typically 8 to 16 input channels
Voltage: ±10 V, 0–10 V, or 4–20 mA signals.
Resolution: 12-bit or higher
Accuracy: ±0.1% of full scale or better
Voltage: 0–10 V or ±10 V
Current: 4–20 mA, configurable
Resolution: 12-bit or higher
Power Supply: +24 VDC
Input Voltage: +5V, +12V
Current Consumption: Typically under 2A
RS-232/RS-485
Operating Temperature: 0°C to 50°C.
Storage Temperature: -20°C to 70°C.
Relative Humidity: 5% to 85% (non-condensing)
Series: Mark VI
Function: Analog Processor Module
Input Voltage: 125 V dc
Output Voltage: 24 V dc
Operating temperature: -30 to +65oC
Mounting: DIN-rail
Model Type: Safety I/O Pack
Series: SDCS
Operating Voltage: Typically 24V DC
Power Consumption: 5-10 W
Current Consumption: 200-400 mA
Operating Temperature Range: -20°C to 70°C (-4°F to 158°F)
Storage Temperature Range: -40°C to 85°C (-40°F to 185°F)
Estimated min. lifetime: 100 000 h
All materials UL/CSA-approved
Maximum Segment Length:
100 m / 328 ft
Topology: Star
Serial Communication Type:
Half or Full Duplex
Transfer Rate: 10Mbps or 100Mbps
Loop-powered driver/transmitter
Compatible with 4 major probe systems
Easily factory calibrated to non-standard shaft material
DIN Rail mounting (flat mounting base available) (P/N 9647)
BNC for access to dynamic output and probe gap
PBT plastic material
Type: Digital Control Module
Voltage Input:
Typically operates on 24V DC
Operating Temperature Range: -40°C to +70°C
Storage Temperature Range: -40°C to +85°C
Analog voltage input ±10 V to ±10 mV
Analog current input 0(4) to 20 mA
Temperature sensor Pt elements as 2-,3-,4-wire
Thermo couples type J, K, T, N, E, R, S, B
Analog voltage output ±10 V
Analog current output 0(4) to 20mA
Resolution: 16-bit input with filter, 14-bit output
Galvanic isolation from the system 500 V
Serial ports : 4
Network ports : 2
Port isolation : 500 VDC
Copper Ethernet ports : 10/100 Mbps
(Model 4353 supports only 100 Mbps)
Fiber Ethernet ports : 100 Mbps
Serial ports : up to 115.2 Kbps per port
Power Supply:
Typically 12V DC or 24V DC
Operating Temperature Range:
0°C to 50°C (32°F to 122°F)
Humidity: Typically rated for
5% to 95% relative humidity
Series: Foxboro I/A Series
Power Supply: Typically 24V DC
Operating Temperature: 0°C and 60°C
Storage Temperature: -20°C and 70°C
Humidity: 5% and 95% (non-condensing)
Input Voltage: 200V-240V AC
Input Frequency: Typically 50/60 Hz
Output Frequency: 0 to 400 Hz
Storage Temperature: -20°C to 60°C
Operating Temperature: Typically between -10°C to 50°C
Humidity: 5% to 95% non-condensing
Highly Intuitive Design Environment
Graphical Configuration
Live Updating Loop Drawings
One-Spot Engineering Environment
Common Database Integrating System,
Control, Display and Field Device
Configuration in One Tool
Power Supply: Typically 24V DC
Operating Temperature: Usually from 0°C to 55°
Current Consumption: Typically around 100 mA
Input Voltage: 24V DC
Input Type: Dry contact
Number of Inputs: Typically up to 16 or 32 input points
Output Voltage: 24V DC
Typical operating range: 230V AC
Frequency: 50/60 Hz
Speed: Up to 2500 RPM
Maximum airflow: ~800-1500 m³/h
Operating Temperature Range:
-20°C to 60°C (-4°F to 140°F)
Storage Temperature:
-30°C to 70°C (-22°F to 158°F)
AC Input Voltage Range: 90-132V or 180-264V
Nominal Output DC Voltage: 24 VDC
Operating Temperature:
Typically 0°C to 50°C (32°F to 122°F)
Typically -20°C to 70°C (-4°F to 158°F)
Gateways Modbus
TCP/IP Master to
Modbus RTU Slave
Data Rate:115.2 kb/s
Number of Ports:2 x RJ45
Interface Type:Ethernet
Supply Voltage - Min:24 V
Supply Voltage - Max:24 V
Packaging:Each
Brand:HMS Networks
Dimensions:114 mm x 44 mm x 127 mm
IP Rating:IP20
Operating Supply Current:200 mA
Product Type:Gateways
Form Factor
PMCPCI PMC-422
Signaling: 3.3V and 5V
Specification 2.2
33 MHz/32-bit
3 watts total
0.3A @ 3.3V
0.4A @5V
Eight rear RS485/RS422/RS232 serial ports
Four RS232 ports on front; RJ45 connectors
(frontports are not available for RS485 and RS422)
SIMOTICS S Synchronous servo motor
1FK7 Compact 0.85Nm
100K, 6000rpm 0.38kW
Naturally cooled Power/signal connectors
Connector can be rotated
by 270° FRAME SIZE IMB 5 (IM V1, IM V3)
FLANGE 1 Absolute encoder
20BIT +12-bit multi-turn with
Drive-CLiQ interface (encoder AM20DQ)
Derating 10% due to absolute encoder
PLAIN SHAFT, TOLERANCE N
WITH HOLDING BRAKE
DEGREE OF PROTECTION IP64
SIMOTICS S synchronous servo motor
1FK7 Compact 1.1 Nm 100K,
6000 rpm 0.50 kW,
naturally cooled IM B5 (IM V1, IM V3)
power/signal connector plug rotatable by 270°
Absolute encoder 20BIT +12-bit
multi-turn with Drive-CLiQ interface (encoder AM20DQ)
Derating 10% due to absolute encoder plain shaft,
tolerance N with holding brake degree of protection IP64
SIMOTICS S SIMOTICS S-1FK7
1FK7-CT synchronous motor
PN=0.82 kW UDC=600 V
M0=3 Nm (100K); NN=3000
r/min; naturally cooled design MB 5 (IM V1, IM V3)
flange 1 power connector rotatable
absolute encoder 24 bit +12 bit
multiturn with DRIVE-CLiQ
interface (encoder AM24DQI) plain shaft,
tolerance N with holding
brake degree of protection IP64
SIMOTICS S SIMOTICS S-1FK7
1FK7-CT synchronous motor
PN=0.82 kW UDC=600 V
M0=3 Nm (100K); NN=3000
r/min; naturally cooled design MB 5 (IM V1, IM V3)
flange 1 power connector rotatable
absolute encoder 24 bit +12 bit
multiturn with DRIVE-CLiQ
interface (encoder AM24DQI) plain shaft,
tolerance N with holding
brake degree of protection IP64
Voltage Input: ±10V, 0-10V, or 0-5V
Current Input: 4-20 mA
Nominal Supply Voltage: 24 VDC
Power Consumption: 250 mA
Operating Temperature: -40°C to +70°C (-40°F to +158°F)
Storage Temperature: -40°C to +85°C (-40°F to +185°F)
Humidity: 5% to 95% non-condensing
Span: 0.3532 to 4.054 V
Size: 17.8 cm high x 33.02 cm wide
Technology: Surface mount
Temperature Operating: -30 to 65oC
Product Type: Servo Terminal Board
Series: Mark VI
Product Type: Terminal Board
Trip Solenoids: 3
Solenoid Rated Voltage/Current: 125 V dc
Solenoid Response Time: L/R time constant is 0.1 sec
Current Suppression: Metal oxide varistor
Control Relay Coil Voltage Supply: 28 V
Flame Detector Supply Voltage/Current: 335 V dc
Flame Detectors: 8
