5mm and 8mm Standard Mount Probe
nthreaded Length Option : 00 = 0.0 inches
Overall case length option : 08 = 0.8 inches
Total length option :10 = 1 metre.
Connector option : 02 = With miniature male coaxial connector.
Diameter : 8mm
Configurations type and thread : Standard, 3/8-24
Lead Armor : No
Input power : -17.5 Vdc to -26 Vdc
at 12 mA Max consumption.
ASKPCB
The board complies with UL 796 standards
Flame rating: V-0,
ensuring good fire resistance
Minimum conductor width: 0.28 mm
Maximum operational temperature: 130°C
frequency synchronization,
automatic gain control (AGC),
transmission of E- and
M-telephone-signaling over the link
embedded operation channel of the link
guard signal for the integrated
teleprotection equipment NSD600
10 °C to 40 °C.
equipment or at the terminals
PC with Windows 2000 or XP
HMI600 software
Newest version
RS-232 Sub-D 9-pole 1:1
Digital multimeter
GMC METRAhit one, or equivalent
Level meter
Advanced control algorithms for
precision regulation
User-friendly interface for
easy parameter configuration
Multiple communication interfaces
for seamless integration
Remote monitoring and
diagnostics capabilities
Energy-efficient algorithms for
reduced power consumption
Rugged construction for
durability in industrial environments
Up to 1000 A, 690 V AC-1
540 A, 600 V general
Only 4 coils cover
24 V - 500 V AC and 20 V - 500 V DC
Push-In option available on the AF09…AF38
Built-in surge suppression
Mirror and mechanically linked contacts
Easy-to-use accessories
through snap-to-connect function
Power Requirements 24 VDC
Operating Temperature Range -20°C to 60°C
Humidity Range 5% to 95%
Mounting Options
Standard DIN rail or custom rack mounting
Fully programmable customized menus
LCD color touchscreen, and buttons
Softkeys support different colors and text
Touch pad and touch ring
Ergonomic design with padded wrist rest
Variable-speed joystick with integral zoom control
L ocking power connector
Dedicated keys for commonly used functions
Dynamic menu selection
Web interface for configuration and firmware upgrades
Laser cut backlit keys
Rated Voltage:120/240 VAC or 125 VDC
Input Voltage Range:
85 to 264 VAC or 100 to 300 VDC
Number of Slots:2
Output Power: 40 Watts max
Output Voltage:24 VDC, 5.1 VDC or 3.3 VDC
Output Current:0-1.6 A, 0-6 A, or 0-9 Amps
Ambient Storage
Temperature Range -40°F to +176°F
Frequency 25 to 60 Hz nominal
Insulation Voltage 300 V
Manual 1601-0120-AE
Operating Temperature Range -40°F to +140°F
Processor Speed:Up to 10 MHz
Power Handling Capacity:Up to 2 kW
Communication Interface:RS-232, RS-485
Operating Temperature Range:-20°C to +60°C
Environmental Compliance:IP20 Protection Rating
Certifications:CE, UL, CSA
Vibration Sensor
Output Type 4-20 mA
Velocity Measurement Range 0.1 mm/s to 200 mm/s
Sensitivity 1000 Hz
Mounting Thread 5/8-18 UNS-2A
Operating Temperature Range -40°C to 120°C
Probe Tip Diameter 11 mm
System Length 22 ft
Thread Size 3/8-24 UNF-2A
-51°C to +100°C (-60°F to +212°F)
0 to 4.0 mm (160 mils) linear range
7.87 mV/μm (200 mV/mil) nominal
Up to 90%, non-condensing
3300 XL NSv (Narrow Side View)
Probe Tip Diameter 5 mm
System Length 20 ft
AISI 304 Stainless Steel
0 to 1.0 mm (40 mils) linear range
<0.2 μm (8 μin) under stable conditions
-34°C to +177°C (-30°F to +350°F)
24V DC internal power supply
within the system
-20 ° C to 70 ° C
5% to 95%, no condensation
Multiple digital/analog input/output interfaces
DIN rail installation or rack mounted installation
16 / 32 digital channels
16 channels can be configured as input or output
Configurable interrupt inputs
Status display for each channel via LED
Supply voltage 18 to 34 VDC
Supply voltage protected against reverse polarity
Cost effective and space saving
Head module for CANopen slave stations
Up to 30 I/O modules per slave station
Optional integrated power supply
Transfer rate 10 Kbaud to 1 Mbaud
Bus length to 5000 m (signal repeater required)
Two internally connected CAN interfaces for loop-through of the cable
Galvanic isolation between CAN interfaces and control electronics
Node address can be set via rotary switch
8 analog inputs
8 analog outputs
Connection possibility single-ended or differential
Power supply for up to 4 potentiometers
Temperature inputs for up to 4 Pt100/Pt1000 sensors
2-wire or 4-wire inputs for Pt100/Pt1000 sensors
Wire break detection for the inputs (for voltage and temperature)
Short circuit proof outputs
compact CAN slave module
16/32 channels can be freely configured as input or output
Digital outputs each with 1 A continuous current
Two internally connected CAN interfaces for loop-through of the cable
Galvanic isolation between CAN interfaces and control electronics
Baud rate and node ID can be set via rotary switch
Supply voltage 18 to 34 VDC
Operating range 0 to +60°C without additional cooling
Full wiring without additional backplanes
Voltage: 24V DC
Current: Varies based on the specific application
Number of Inputs: 16
Number of Outputs: 16
Input Voltage: 24 VDC
Output Voltage: 24 VDC
Operating Temperature: -20°C to 60°C (-4°F to 140°F)
