
Input Module
Number of inputs 16-channel, module isolation
Input current 6 mA ± 20 %
Contact rating 24 V DC +20 % / -10 %
External power supply 24 V DC +20 % / -10 %
Input response time 40 ms maximum
Withstand voltage (*1) (*2) 2 kV AC
between input signal and system for 1 minute
16-input line collectivelyconnected
FILED MONITOR
POWER SUPPLY
24 VDC
FILED MONITOR
+18 V to +36 V DC Input Voltage Range
30 Amp pk Nominal Inrush Current
Over Voltage Protection
Power Voting Unit
Input Channels:24V DC signals
Response Time:<10 ms
Operating Voltage:24V DC
Power Consumption:≤ 5 W
Isolation:1.5 kV AC
3300 5mm Proximity Probes
330173 3300 5mm Probe,
M8 x 1 thread,without armo
Minimum unthreaded length: 0 0 = 0.0mm
Minimum unthreaded length: 0 6 = 60mm
1 0 1.0 metre (3.3 feet)
0 2Miniature coaxial ClickLocconnector
standard cable
3300 5mm Proximity Probes
330173 3300 5mm Probe
M8 x 1 thread,without armo
Minimum unthreaded length: 0 0 = 0.0mm
Minimum unthreaded length: 0 2 = 20mm
1 0 1.0 metre (3.3 feet)
0 2Miniature coaxial ClickLocconnector
standard cable
3300 5mm Proximity Probes
330173 3300 5mm Probe,
M8 x 1 thread,without armo
Minimum unthreaded length: 0 0 = 0.0mm
Minimum unthreaded length: 0 7= 70mm
1 0 1.0 metre (3.3 feet)
0 2Miniature coaxial ClickLocconnector
standard cable
3300 5mm Proximity Probes
330173 3300 5mm Probe,
M8 x 1 thread,without armo
Minimum unthreaded length: 0 0 = 0.0mm
Minimum unthreaded length: 0 3= 30mm
1 0 1.0 metre (3.3 feet)
0 2Miniature coaxial ClickLocconnector
standard cable
3300 5mm Proximity Probes
330173 3300 5mm Probe,
M8 x 1 thread,without armo
Minimum unthreaded length: 0 0 = 0.0mm
Minimum unthreaded length: 0 9= 90mm
1 0 1.0 metre (3.3 feet)
0 2Miniature coaxial ClickLocconnector
standard cable
POWER SUPPLY BOARD
Acs880/580 Series Inverter
Input Voltage: 1-phase/3-phase input
AC Input: 200–500 VAC
DC Input: 500–700 VDC
Frequency: 50/60 Hz
Output Power: ≤ 100 W
Output Voltage: Supplies +24 VDC
Load Capacity: 5 A @ 24 VDC
MC INTERFACE BOARD
Input Voltage: Typically 24V DC
Output Signals: Digital and analog signals for
motor control and feedback.
Current Consumption:100-500mA
Communication Voltage Levels: 3.3V or
5V logic levels for digital communication.
Touch screen
Screen Size: 7 inches (diagonal).
Resolution: 800 x 480 pixels.
Display Type: TFT LCD with vibrant colors and excellent contrast.
Touch Screen Type: Resistive touch for accurate and reliable input.
Brightness: 400 cd/m².
Colors: 65,536 colors for sharp and detailed visualization.
Viewing Angle: ±70° )
Variable Speed Drive - 2 HP
variable speed drive
ATV31- 30kW
40HP - 480V
EMC filter-w/o
graphic terminal
Seismic Transmitter
00 0 – 12.7 mm/s (0 – 0.5 in/s)
01 10 Hz to 1 kHz (600 to 60 kcps)
RMS(Root Mean Square)
05 Multiple Approvals (CSA/NRTL/C,ATEX/IECEx)
ElectricalIsolationGreater than 108 ohms
Connector3-pin MIL-C-5015, 316L stainlesssteel
Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.