ALL MANUFACTURERS

I/O Interface Card

Power Supply:24V DC (±10%)
Surge Protection 4kV 
Input Channels:24V DC
Isolation:1.5kV channel-to-channel
Output Channels:4-20mA
Update Rate:10ms per channel
Backplane Interface:800xA CI867 bus
Protocol Support:Modbus RTU/TCP

Governor drive board

Supply Voltage: 24VDC ±10%
Power Consumption: 15W typical
Isolation: 1500VAC I/O to logic
Speed Range:0-12,000 RPM
Resolution:0.01% of rated speed
Analog Inputs:16-bit, ±10V, 4-20mA
Analog Outputs: 12-bit, ±10V
Digital I/O: 16x opto-isolated (24VDC)
Servo Outputs: 4x (PWM, ±50mA)

Central Processing Unit

Supply Voltage: 24VDC (19.2-30V)
Power Consumption: 12W typical
Isolation: 1500VAC 
Program Memory 16MB (user logic)
Process I/O Capacity Up to 250,000 I/O points
Communication Links 16 simultaneous
Task Execution 32 parallel tasks
Dual-Core Processor: 1.2 GHz Power Architecture
Memory: 512MB DDR3 RAM + 1GB Flash

Control Circuit Board

Supply Voltage:24V DC (±10%)
Power Consumption:≤15W 
Analog Inputs:4x 0-10V / 4-20mA, 16-bit ADC
Digital Inputs:8x 24V DC, opto-isolated
Digital Outputs:6x relay / MOSFET, 24V DC @ 2A
Communication:RS-485 Modbus RTU
Processor: 32-bit ARM
Memory: 512KB Flash
PWM Resolution: 12-bit

Circuit Board

Operating Voltage:24V DC (±15%)
Power Consumption:≤8W
Analog Inputs:2x (0-10V / 4-20mA, 12-bit resolution)
Digital Inputs:4x (24V DC, opto-isolated, 3ms debounce)
Relay Outputs:2x (Form C, 5A @ 250V AC)
Isolation Voltage:2000V AC

Control Module

Supply Voltage: 24VDC (19.2-30V)
Power Consumption: 10W typical
Isolation: 1500VAC
Memory: 256MB DDR3 RAM
Processor: Dual-core 800MHz
Program Capacity:8MB user memory
I/O Capacity:Up to 1024 points
Communication:4 simultaneous protocols

Control Circuit Board

Supply Voltage:24VDC ±10%
Power Consumption:6W typical
Analog Inputs:4x (±10V, 16-bit)
Digital Inputs:8x (24VDC, opto)
Relay Outputs:2x (5A/250VAC)
Processor: 32-bit RISC processor 
Memory: 128MB DDR3
Isolation: 2500Vrms

Circuit Board

Processor: 32-bit ARM Cortex-M7 (300 MHz)
Memory: 512KB Flash, 128KB RAM
Control Loop Speed: ≤100µs 
PWM Resolution: 12-bit 
Operating Voltage:24V DC (±10%)
Power Consumption:≤10W (typical)
Analog Inputs:4x (0-10V / 4-20mA, 16-bit ADC)
Digital Inputs:8x (24V DC, opto-isolated, 3ms debounce)
Relay Outputs:2x (Form C, 5A @ 250V AC)
Isolation Voltage:2000V AC

Thermal Overload Relay Module

Rated Current (Ie):0.1-15A (adjustable)
Supply Voltage:24V DC/AC (±15%)
Power Consumption:≤3W
Contact Rating:5A @ 250V AC (Aux. contacts)
Isolation Voltage:2500V AC 
Control Inputs:24V DC

PCB BOARD

Operating Voltage:24V DC ±10%
Power Consumption:8W max
Digital Inputs:6x (24V DC, opto-isolated)
Analog Inputs:2x (0-10V/4-20mA)
Relay Outputs:2x (5A @ 250V AC)
Isolation Voltage:1500V AC
Processor: ARM Cortex-M4 168MHz
Memory: 256KB Flash

Interface Card

Supply Voltage:24V DC (±10%)
Power Consumption:≤5W
Digital Inputs:8x (24V DC, opto-isolated)
Analog Inputs:4x (0-10V / 4-20mA, 12-bit resolution)
Relay Outputs:2x (5A @ 250V AC, Form C)
Isolation Voltage:2500V AC
Processor: 32-bit ARM Cortex-M4 

3300 XL 8 mm Proximity Probes

330101  3300 XL 8 mm Probe
3/8-24 UNFthread, without armor
Minimum unthreaded length:2.0 in
Minimum case length: 3.9 in
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector
standard cable
05 CSA, ATEX, IECEx  Approvals

3300 XL 8 mm Proximity Probes

330101  3300 XL 8 mm Probe
3/8-24 UNFthread, without armor
Minimum unthreaded length: 4.6 in
Minimum case length: 6.5 in
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector
standard cable
05 CSA, ATEX, IECEx  Approvals

3300 XL 8 mm Proximity Probes

330101  3300 XL 8 mm Probe
3/8-24 UNFthread, without armor
Minimum unthreaded length: 0.0 in
Minimum case length: 0.3 in
50 5.0 meters (16.4 feet)
02 Miniature coaxial ClickLocconnector
standard cable
05 CSA, ATEX, IECEx  Approvals

Proximitor Sensor Sensor

9 0 9.0 metres (29.5 feet）
0 5 Multiple Approvals
24VDC Power Supply

DC Motor Controller

Input Voltage:3-phase 380-500V AC ±10%
Output Voltage:0-400V DC (armature)
Current Rating:2000A continuous
Field Supply:0-300V DC, 20A
Control Voltage:24V DC ±10%
Speed Regulation: ±0.1% of base speed
Torque Control: ±1% of rated torque
Response Time: <20ms for 90% speed change
Resolution: 16-bit 
Standard: PROFIBUS DP-V1 (12Mbps)
Optional: DeviceNet, Modbus RTU

Field Exciter Board

Field Voltage Output:50-300V DC 
Field Current Rating:Up to 20A 
Control Voltage:24V DC (±10%)
Isolation Voltage:2500V AC
Response Time:<10ms
Analog Inputs: 2x (0-10V/4-20mA) for field ref
Digital Inputs: 3x (24V DC) for enable/disable
Relay Outputs: 2x (5A @ 250V AC) 

MOBILE PANEL 277 10"

SINAMICS PWB AC FSG 480V 380A

Communications Coprocessor Module

CSM 1277 Compact Switch Module