
MM4 Mailbox Module
MEMORY MODULE
SIMADYN D MM4
32 BIT
L- AND C-BUS
2 MB RAM SYSTEM
ERROR SIGNAL OUTPUT
Power supply unit
Analog Signal: 0-10V
Dual Output Voltage – +24V DC
Remote On/Off – 24V DC control input
Input Voltage:3-phase 380-500V AC (45-65Hz)
Output 1 (+24V DC):10A (240W)
Output 2 (+15V DC):5A (75W)
Efficiency:≥92% (at full load)
Ripple Noise:<1% of rated output
990 Vibration Transmitter
990 Vibration Transmitter
04 0-4 mils pp (0-100 μm pp)
50 5.0 meters (16.4 feet)
70 7.0 meters (23.0 feet)
01 35 mm DIN rail clips
00 Not required
147202-01 (RMOD4140 3300XL 8MM 5M)
990 Vibration Transmitter
990 Vibration Transmitter
08 0-8 mils pp (0-200 μm pp)
50 5.0 meters (16.4 feet)
70 7.0 meters (23.0 feet)
01 35 mm DIN rail clips
00 Not required
165335-01(MOD 4140 3300 XL 8MM 9M)
THYRISTOR MODULE
Repetitive Blocking Voltage (VDRM):8000V
Average On-State Current (ITAV):1600A @ 85°C
Surge Current (ITSM):40kA (8.3ms half-sine)
Gate Trigger Current (IGT):200mA (max)
High Surge Current – Up to 40kA
Critical dV/dt:1000V/μs
3300 5mm Proximity Probes
330171 3300 5mm Probe
1/4-28 UNFthread, without armor
0 0 = 0.0 in
Minimum unthreaded length: 20= 2.0in
9 0 9.0 metres (29.5 feet)
0 2Miniature coaxial ClickLocconnector
standard cable
0 5 Multiple Approvals
991 Thrust Transmitter
991 Thrust Transmitter
50 5.0 meters (16.4 feet)
01 35 mm DIN-rail clips
00 Not required
Frequency Converter
Power Range: 157A / 110kW (at 400V)
Input Voltage:3-phase 380-480V AC (±10%), 50/60Hz
Output Current:157A continuous
Overload Capacity:110% for 60s / 150% for 3s
Switching Frequency:1-16kHz (adjustable)
Efficiency:≥97% (at full load)
Analog Inputs: 2x (0-10V / 4-20mA)
Digital Inputs: 6x (24V DC)
Relay Outputs: 2x (5A @ 250V AC)
3300 XL Proximitor Sensor
Standard Range: 0 to 500 mils
Extended Range Options: Up to 1000 mils (25.4 mm)
Sensitivity: 200 mV/mil
Phase Delay: < 1° at 1 kHz
Voltage Output: –2 V to –18 V DC
Current Output (Optional): 4–20 mA
3300 XL Proximitor Sensor
Standard: 0–500 mils
Sensitivity:200 mV/mil
Extended Options: Up to 1,000 mils
Voltage: –2 V to –18 V DC
Current (Optional): 4–20 mA
Linearity:±1% of full scale
Power Supply:–18 to –24 V DC
3300 XL 50 mm Proximity Probe
3300 XL 50 mm Proximity Probe
0 2 M14x1.5 Thread
1 0 1.0 meter (3.3 feet)
0 0High Temperature FluidLocCable
0 0 No Approvals
Analog Output Module
Output Type 4-20 mA
Output Channels 16
Output Ripple < 100 mV
peak-to-peak at power line frequency
Output Temperature Drift 0.005% of Full Scale/°C
Output Readback Accuracy ±4% of Full Scale
Output Current Linearity ± 0.05% of Full Scale nominal.
Resolution ± 0.05% of Full Scale
Calibrated Accuracy ± 0.35% of Full Scale (25oC) including linearity
Directly Settable Output Current Range 0 mA, 2.9 mA to 21.1 mA
Maximum Output Compliant Voltage 16 V
Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.