

















DIGITAL I/O Unit
Channels: 16 digital inputs
Rated Voltage: 24 V DC
Input Voltage Thresholds:15–35 V
Input Current: ~5 mA at rated voltage
Voltage Drop (at 500 mA): ≤0.5 V
Leakage Current: ≤0.1 mA
Response Delay: ≤0.5 ms
Power Dissipation (per channel): 150 mW
Interconnect Cable
3-conductor shielded 22 AWG (0.5mm2)
armored cable
with 3-socketplug at one end
terminal lugs at theother end
Minimum length of 3.0 ft(0.9 m)
maximum length of 99 ft (30m)
Velomitor Piezo-velocity Sensor
02 M8 x 1
Sensitivity3.94mV/mm/s (100 mV/in/s)±5%.
Velocity Range 1270 mm/s (50 in/s) peak
AmplitudeLinearity±2% to 152 mm/s (6 in/s)peak
MountedResonantFrequencyGreater than 12 kHz.
SERIES C CONTROL MODULE
Operating Voltage: 24 V DC
Input Current: 1.5 A
Output Power: 10 W
Output Frequency: 1 kHz
Operating Temperature: -20°C to +70°C
Humidity Range: 5% to 95% non-condensing
High Voltage Inverter Motherboard
Digital Inputs:24V DC
Control Voltage (Logic Side): 24V DC
High Voltage (Power Side): 3.3 kV
Control Signals: ≤ 5A
Control-to-Power Isolation: ≥ 2500V AC
Control Board
Main Processor: 32-bit RISC-based CPU
Clock Speed: 200–500 MHz
Operating Voltage: 24V DC (±10%)
Power Consumption: 5–15W
Isolation: 1500V AC
Ethernet/IP:10/100 Mbps
Digital Inputs: 24V DC
Digital Outputs: Channels 4–8
3300 XL 8 mm Proximity Probes
330104 3300 XL 8 mm Probe
M10 x 1 thread,with armor
Minimum unthreaded length: 0 mm
Minimum case length: 50 mm
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector
standard cable
4-fold relay module, safety related
Switching voltage ≥ 5 V, ≤ 250 V AC / ≤ 110 V DC
with integrated safety shutdown,
with safety isolation,
with 3 seriel relays (diversity)
solid state output (open collector)
for LED display in the cable plug
requirement class AK 1 ... 6

Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.