ALL MANUFACTURERS

Output Expansion Termination Module

Series Mark V
Part Number DS200DTBDG1ABB
Functional Acronym DTBD
Functional Description Mark V Terminal Board
PCB Coating Normal Coating
Revision Quantity 3 Revisions
Mark V Series Grouping Group 1
Assembly Type Normal Assembly

Analog Input Milliamp I/O Termination Module

Mark V Series
Functional Description RST 
Analog Termination Board
Functional Acronym TBQC
PCB Coating Normal Coating
Functional Revision 1 A

Serial Interface Card

Local Bus Power 12 VDC at 300 mA
AmbientTemperature-40°C to +70°C 
Shock 10g ½ Sinewave for 11msec
Vibration 1mm Peak to Peak from 2 to 13.2Hz
0.7g from 13.2 to 150Hz
AirborneContaminantsISA-S71.04 –1985 Airborne
Contaminants Class G3 

Vibration Transmitter

05 0-5 mils pp (0-125 μm pp)
03 DIN clips and screws
CNCSA Division 2, ATEX Zone 0
ATEXZone 2 and includes 
ABSmaritime approval

SIMATIC SCD1900 19"WIDE/TOUCH/1440X900

RX3i High Speed Counter, 4 channels. 8 configurable inputs and 7 configurable ESCP outputs. Module supports high speed counting, input interrupts and programmable limit switch.

Analog input 15 bit, 4-20mA, current, 15 channel. TUV approved.

I/O Module

Description: I/O Module 
Compatibility: 3500 Series
Analog Inputs: 4–20 mA, 0–10 V
Power Supply: 24 VDC
Operating Temperature: -40°C to +85°C (-40°F to +185°F)
Humidity Tolerance: Up to 95% non-condensing

Condition Monitoring System

Input Power Min: 18 Vdc Max: 36 Vdc 
Current Max: 1.7 A 
InrushCurrentMax: 2.7 A, less than 5 ms 
Max: 12 dynamic signals and 2 Keyphasorsignals
DynamicRange110 dB @ fs = 102.4 ksps 
Signal/NoiseRatio110 dB @ fs = 102.4 ksps 
A/DConversionSigma-Delta 24 bits nominal 
Bandwidth 0 to 40 kHz 

AQ 4XU/I ST

Servo Amplifier

3300 NSv Reverse Mount Probe

330906-02-12-CC-DD-EE 3/8-24 UNF threads
05 0.5 meter (20 in)
02 Miniature coaxial ClickLocconnector
standard cable
00 Not required

CP 5612 Communications Processor

Power Supply Rack

Overvoltage:28V DC
Input Voltage:400-480V AC, 3-phase (±10%)
Output Voltage:24V DC regulated
Output Current:50A (continuous), 60A (peak)
Power Rating:1.2kW (per module)
Efficiency:>93% (at 50% load)
Power Factor:>0.95