
Servo Motor
Rated Power:4.5 kW
Rated Torque:28 Nm
Peak Torque:84 Nm (300% overload)
Rated Speed:1500 rpm
Max Speed:5000 rpm
Voltage:400V AC (3-phase)
Current:9.5A (rated), 28A (peak)
Torque Constant:1.8 Nm/A
Back EMF:110 V/krpm
Rotor Inertia:0.012 kg·m²
Stator Resistance:0.8 Ω (line-to-line)
Thermal Time Constant:45 minutes
SERIAL COMMUNICATION MODULE
Interface:RS-422/RS-485
Communication function: Half-duplex
Synchronization method:Start-stop synchronization
Transmission code:binary
Character length:8 bits
Stop bit length:1/2 bits
Transmission distance:Maximum 15 m
Current consumption:0.5 A
REF542plus HMI Unit
Supply Voltage:24V DC (18-36V range)
Power Consumption:8W (typical)
Isolation :2kV AC
Display Type:5.7" TFT LCD (color)
Resolution:320 × 240 pixels
Touch Panel:Resistive (single-touch)
Backlight:LED (50,000h lifespan)
Ethernet:10/100 Mbps (IEC 61850 MMS)
Optical Port: IR interface for local config
USB:Type B
Multi flame detector - control unit
Power Supply:120-220 Vac +/- 20%,
45-65 Hz 24Vdc +/- 20%
AC input: 30 VA (6A / 5 ms inrush current)
DC input: 22 W (24A / 2 ms inrush current)
Operating: 0 - 60°C (32 - 140°F)
Storage: -25 - 85°C (-13 - 185°F)
Contact rating: 250 Vac 3 A 750 VA cosΦ 0.4
220 Vdc 300 mA 66 W
PCB Board
KJMP CARD
Operating Voltage:12V DC
Current Draw:500mA
Memory Capacity:512KB
Communication Interface:RS-485
Analog I/O Pack
Ambient Temperature Range -22 to 149°F
Class I, Div. 2, Groups A, B, C, D Standard
ANSI/ISA - 12. 12.01-2015
Functional Acronym/Abbreviation PAIC
Model Type Analog I/O Pack
Non-Hazardous Certification UL E207865
Proximity/Seismic Monitor Module
Series: 3500
Input Signal: -10 Vdc to +10 Vdc
Power Consumption: 10.5 watts
Product Type: Proximitor Monitor Seismic I/O Module
Ethernet: 100Base-FX Fiber-Optic
Operating Temperature: -30°C to +65°C
Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.