ALL MANUFACTURERS

ANLOG TERM CABLE FLAME

Signal termination for 4–20 mA
Current: 4–20 mA
Voltage: 0–10 V DC, ±5 V DC
Temperature: RTD (Pt100/1000)
Cable Length: 10 meters (indicated by "-10" suffix)
Bend Radius: ≥8x cable diameter
Operating Temperature: -40°C to +105°C (-40°F to +221°F)

ANALOG INPT TERM CABLE

Current: 4–20 mA
Voltage: 0–10 V DC, ±10 V DC
Gauge: 18–22 AWG
Cable Length: 30 meters
Bend Radius: ≥10x cable diameter

Analog Input Termination Unit

Number of Channels: 8 or 16
Current: 4–20 mA
Voltage: 0–10 V DC, ±10 V DC
Channel-to-channel: ≥250 V AC
Field-to-system: 1500 V AC
Supply Voltage: 24 V DC (±10%)
Power Consumption: ≤5 W 

TERMINATION UNIT CABLE

ABB  infi-90 Termination Loop Cable 
Gauge: 18–24 AWG
Voltage Rating: ≤60 V DC
Operating Temperature: -20°C to +70°C (-4°F to +158°F)
Humidity: 5–95% RH (non-condensing)

INSULATION MONITORING

IRDH275427
ISOMETER
IRDH SERIES
INSULATION MONITORING
LED DISPLAY
19.2-72 VDC
19.2-55 VAC
(POSSIBLE REPLACEMENT SERIES IS ISO685)

Horizontal IO bus transfer board

Voltage: 24 V DC (±10%)
Power Consumption: ≤10 W (typical)
Isolation: 1500 V AC
Operating Temperature: -40°C to +70°C (-40°F to +158°F)
Storage Temperature: -50°C to +85°C (-58°F to +185°F)
Humidity: 5–95% RH (non-condensing)

I/O Extender Module

Space requirements:4 TE, 3 HE (= 4 HP, 3U)
current: max. 10 mA (WD1in + WD2in)
Number of outputs:18 
power requirements:100 mA
current: + 5V_load of all (18) IO boards
+ WD_load of all (18) IO boards
voltage drop:0.2V < V < 0.8V

TRANSMITTER

R11XJ107G
TRANSMITTER
5 KHZ
0.95 TR
+/- 7 MIN
WITH CONN

C-plug

C-plug
removable data storage medium 
For simple device replacement in case offault, 
for recording configuration or engineering and application data
can be usedin the following 
SIMATIC NET products with C-plug 
slot: SCALANCE XC-200, 
XP200, XM-400, XR-500, 
M-800, W-700, SC-600 and S615

PROGRAMMABLE SAFETY CONTROLLER

1756L82ES
PROGRAMMABLE SAFETY CONTROLLER
GUARDLOGIX 5580
5 MB STANDARD MEMORY
2.5 MB SAFETY MEMORY
175 ETHERNET/IP NODE CAPACITY
1 USB 2.0 PORT
1 ETHERNET/IP PORT (10/100 MBPS/1 GB SPEED)
0 TO 60 DEGREE C OPERATING TEMPERATURE

MICROMASTER 440 without filter

MICROMASTER 440 without filter 
380-480 V 3 AC +10/-10% 47-63 Hz 
constant torque 0.37 kW overload 150% 60 s
200% 3 s square-law torque 0.37 kW
protection IP20 ambient 
temperature -10+50 °C without AOP/BOP

COMMUNICATION INTERFACE MODULE

1771ACN15
COMMUNICATION INTERFACE MODULE
1 PORT CONTROLNET
SINGLE-PORT NON-REDUNDANT MEDIA
CONTROLNET 1.5 AND BEYOND
1 AMP
5 VDC

Exciter DC Feedback Board

Voltage Feedback: 0–500 V DC
Current Feedback: 0–10 A DC
Accuracy: ±0.25% of full scale
Frequency Response: Up to 100 Hz
Signal-to-System Isolation: 1500 V AC
Common-Mode Rejection: >60 dB at 50/60 Hz
Analog Output: 4–20 mA or 0–10 V DC

3300 XL 8 mm Probe

3300 XL 8 mm Probe
M10 x 1 thread,without armor
50 5.0 meters (16.4 feet)
02 Miniature coaxial ClickLocconnector
standard cable
00 Not required

3300 XL 8 mm Probe

3300 XL 8 mm Probe
M10 x 1 thread,without armor 
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector
standard cable
00 Not required

3300 XL 11 mm Proximity Probes

3300 XL 11 mm Probe
M14 x 1.5 thread,without armor
10 1.0 meter (3.3 feet)
01Miniature coaxial ClickLocconnector 
with connectorprotector, standard cable
00 Not required

4 Meter Armored Cable

3300XL 8MM 
4 Meter Armored Cable 
Insulation Rating: ≥250 V AC
Bend Radius: ≥100 mm
PVC: -40°C to +105°C (-40°F to +221°F)
PUR: -40°C to +90°C (-40°F to +194°F)

Proximity Sensor

10204400281002
PROXIMITY SENSOR
MODEL: 3300 XL 8 MM
1 M LENGTH
OUTPUT RESISTANCE: 50 O
OPERATING TEMP: -51 C TO +177 C
(060-987-158)

Universal Input Output Module

Fast Scan (Priority I/O Module Scan)
Electronic short circuit protection
Safe-state (FAILOPT) behaviors configurable 
on aper channel basis for Digital / Analog Output
HART 7 support (analog IO)
Extended Temperature Range -40 to +70°Cmodule ambient

Redundant Power Supply

Primary/Secondary Inputs: Dual 24 V DC (±20% range)
Voltage: 24 V DC (regulated, ±1%)
Per Module: 5 A continuous (10 A peak)
Redundant Capacity: 15 A total
Efficiency: ≥85% (typical load)
Ripple/Noise: <100 mV peak-to-peak

Multiplexed I/O Module

Occupies one slot in the I/O chassis
Two isolated RS-422 serial 
ports for remote multiplexed I/O
Analog Input: 4–20 mA, 0–10 V DC, RTD (Pt100)
Analog Output: 4–20 mA, 0–10 V DC
Channels: 16–32 multiplexed channels
Scan Rate: <10 ms per channel 
Analog: 16-bit ADC/DAC
Channel-to-channel: 250 V AC
Input Voltage: 24 V DC ±10% 

Monitored Digital Input Module

Sixteen input points
Hot-replaceable
Complete, automatic testing of all input circuits
Automatic line monitoring detects 
open and short field wiringfaults
2500 volt minimum electrical 
isolation between field and logiccircuits

Bus module

Bus module for ET 200PA SMART 
for holding two 40 mm wide I/Omodules 
for insertion and removal function

Double format PL7 processor

TSXP57303AM
PROCESSOR
PL7 DOUBLE-FORMAT
1000 MA
5 VDC
IP20

SYNCHLINK BASE BLOCK

1751SLBA
SYNCHLINK BASE BLOCK
CONVERTS SYNCHLINK TO ELECTRICAL SIGNALS
TO INTERFACE UP TO 4 FIBER 4-PORT SPLITTER BLOCKS
1.2 AMP
600 MA
24 VDC
OPEN STYLE
MOUNTABLE