ALL MANUFACTURERS

INVERTER CONTROL MODULE

SIMOVERT MASTERDRIVES 
INVERTER CONTROL MODULE 
IGD5 FOR DEVICE 3AC 660-690V
50/60HZ AND 890-930VCD
118A

PCB CONTROL CARD

PCB CONTROL CARD
FOR VC INVERTERS
CUVP-02

Current transformer

current transformer ES 100-9594, 100A
Nominal Primary:100 Amps RMS 
Secondary Output:5 mA RMS 
Burden/ALF Accuracy:Meets ≤ 25 VA
Frequency Range:15-500 Hz
Insulated Breakdown:>3 kV, 100 kΩ
Operating Temperature:-30°C to +70°C
Humidity Robustness:≤ 95% at 50°C

CABLE OPTIC FIBER

CABLE
OPTIC FIBER
FSH 480V

POWER INTERFACE COATED

Supply Voltage: ±15 VDC
Logic Voltage: 3.3‒24 V DC 
Max Consumption: 28 mA
Galvanic Isolation: Basic Isolation 4kV
Output Types: OPTO+IGBT signals 
Driver Voltage: +18 V / -5 V
PWM Speed: 2.5 kHz‒8 kHz
Max Humidity: ≤96% non-condensing

Weighing Terminal

Voltage:100 - 240 VAC
Housing:Robust stainless steel design
Protection Rating:IP69k
Hazardous Approval:Non-Hazardous Area
Automation:Automation Controller
Power Supply:100 - 240 VAC

Fieldmate Handheld Communicator

Handheld design
Enhanced 4.3" diagonal anti-glare touchscreen 
with color graphic display 
Full QWERTY keyboard 
On-Demand Help Menus and 
teachable device-specific short cuts
Manage device information through PC connection
Integrated multi-language support

COMMUNICATIONS MODULE

COMMUNICATIONS MODULE
GATEWAY
ETHERNET/IP
MODBUS
24 VDC
SERIAL 4 PORT
DIN-RAIL MOUNTED

SENSOR FLAME SCANNER MODULE

SENSOR FLAME SCANNER MODULE
ASSEMBLY
PCBA
TUV

Power Supply Module

Input Voltage:48–800 VDC
Max Rated Output Power:2.8–11 kVA
Output Current (Peak):4–50 Amps
Over-Temperature: ≥120°C
Main Component:IGBT module

Driver Board

Input Voltage (Logic):24V DC (±10%)
Output Drive Voltage:15V–20V 
Max. Switching Frequency:20 kHz
Isolation Voltage:2500V AC 
Propagation Delay: <500 ns
Operating Temperature:-20°C to +70°C
Storage Temperature:-40°C to +85°C

APPLICATION BOARD

Supply Voltage:24V DC 
Power Consumption:< 2W
Isolation:500V AC
Operating Temp:-25°C to +70°C
Storage Temp:-40°C to +85°C
Humidity:5–95% (non-condensing)

Interconnect Cable

Two-conductor 18 AWG
twisted, shielded cable 
withright angle two-socket plugat one end 
terminal lugs atthe other end
Used withmonitors and with 21128
Velocity Transducer Housing
Min. length: 2.0 ft (0.6 m)

Interconnect Cable

Right angle interconnectcable 
Length: Typically 25 feet
Impedance: 50Ω or 75Ω
Operating: -40°C to +120°C (-40°F to +248°F)
Storage: -50°C to +150°C (-58°F to +302°F)

Proximity Probe Housing

28:3300 XL 8 mm probe
multiple approvals
05 0.5 m (20 in)
01 One 3/4-14 NPT fitting, two plugs
02 3/4-14 NPT 
(Required if ordering StandoffAdapter Option)

3300 XL 8 mm Proximity Probes

330103 3300 XL 8 mm Probe
M10 x 1 thread,without armor
50 5.0 meters (16.4 feet)
02 Miniature coaxial ClickLocconnector
standard cable
00 Not required

3300 XL 8 mm Proximity Probes

330103 3300 XL 8 mm Probe
M10 x 1 thread,without armor
50 5.0 meters (16.4 feet)
02 Miniature coaxial ClickLocconnector
standard cable
00 Not required

3300 XL 8mm Extension Cable

Model Number: 129957-085-057-05
Series: 3300 XL
Probe End: Standard 8mm
Cable Type: Extension Cable
Operating: -40°C to +120°C (-40°F to +248°F)
Storage: -50°C to +150°C (-58°F to +302°F)

3300 XL 8 mm Proximity Probes

330102 3300 XL 8 mm Probe
3/8-24 UNFthread, with armor
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector
standard cable
05 CSA, ATEX, IECEx  Approvals

3300 XL 11 mm Proximity Probes

330709 3300 XL 11 mm Probe
M16 x 1.5 thread,without armor
10 1.0 meter (3.3 feet)
12 Miniature coaxial ClickLocconnector
FluidLoc cable
05 Multiple Approvals

SINAMICS POWER MODULE

SINAMICS POWER MODULE 
PM240-2 WITHOUT FILTER 
WITH BUILT IN BRAKING CHOPPER 
3AC380-480V +10/-10% 47-63HZ 
OUTPUT HIGH OVERLOAD: 11KW FOR 200% 3S
150% 57S,100% 240S 
AMBIENT TEMP -10 TO +50 DEG C 
OUTPUT LOW OVERLOAD: 15KW FOR 150% 3S
110% 57S,100% 240S 
AMBIENT TEMP -10 TO +40 
FSC PROTECTION IP20 
WITHOUT CONTROL UNIT AND PANEL APPROVED
FOR CU FIRMWARE- VERSION V4.6

Drive board

Drive Integration:Sinamics S110
Supply Voltage:24V DC (±15%)
I/O Capabilities:Max ≤ 16 axes
Working Temp:-20℃ … 85℃⁵ storage

Control Unit

Primary Input Voltage:3AC 380–480V
Input Frequency:50/60Hz
Auxiliary Power:24V DC ±10%
DC Link Operating Voltage Range:510–680V DC
Overvoltage Shutdown Threshold:830V DC
Peak Feedback Current Capability:≤150%
Digital Inputs:14 channels

POWER INTERFACE MODULE

Input Voltages Monitored:400–690V AC 
Control Voltage:24V DC
Signal Resolution:±0.5% accuracy
Input Frequency Window:48–63Hz

FIELD SUPPLY

Input Voltage:100–690V AC/DC
Frequency (AC):45–65 Hz 
Starting Current:≤4 In (inrush) at 70%
Output Voltage (Main):25–28V DC
Output Power:Static-rated at 50W sustained
Max. Ripple Peak:300mVp-p at 100% load
Efficiency Efficiency:>90% at nominal load