
Sample Gas Feed Unit
In operation: +5 to +45 °C
Storage and transport: –25 to +60 °C
75 % year-round average
Input voltage 230 V AC or 115 V AC, 50 Hz or 60 Hz
Power consumption max. 185 VA
Sample gas pressure pabs = 70 to 105 kPa (0.7 to 1.05 bar)
Sample gas inlet temperature +10 to +50°C
HVD Board
Power Supply: 24 V DC
Communication Protocol:
Ethernet, Modbus TCP/IP
Operating Temperature Range:
-20°C to +60°C
Control Board
Operating Voltage: 24V DC
Temperature Range: -20°C to +60°C
Humidity Range: 5% to 95%, non-condensing.
UNIVERSAL PROCESS CONTROLLER
CM303S0S0E0STD
UNIVERSAL PROCESS CONTROLLER
1/4 DIN
STANDARD VERSION WITH OPTIONS 1 AND 2
REPLACES C351/0000/STD
VERITRON POWER CONVERTER
Series: BBC
Type: Power Converter
Output Voltage: 24V DC
Power Rating:5kW
SwitchLine
220 V AC OETL
ZT 80 A220AC
1SCA022079R9050
OETLZT 80_/_ Un /R
110VAC/1000Ω, 230VAC/3900Ω
24VDC/48Ω, 48VDC/190Ω
60VDC/300Ω,110VDC/1000Ω
220VDC/3900Ω, U=0.7...1.1*Un
PDC=15 W, PAC = 30VA
CANopen adapter module
Power Supply:24V DC
Input/Output Voltage:24V DC
Operating Temperature Range:
-20°C to +60°C
Humidity:
5% to 95% relative humidity
PCB Card
Input Voltage: Typically 24V DC
Operating Temperature Range: -20°C and 60°C
Storage Temperature: -40°C to 85°C
Analog Input Module
Input Range: 0-10V (voltage),
4-20mA (current)
Resolution: 16-bit
Sampling Rate: 1000 samples per second per channel
Accuracy: ±0.1% of full scale
Isolation: 1500V isolation between channels and the system
Operating Temperature Range: -20°C to +60°C
Storage Temperature Range: -40°C to +85°C
Power Supply Voltage: 24V DC
Power Consumption: Maximum 5W
Drive Board
Voltage Range: 24V DC
Operating Frequency: 50Hz or 60Hz
Operating Temperature Range: -10°C to +50°C
Storage Temperature Range: -20°C to +70°C
VOLTAGE INSERT CARD
Input Voltage Range: 24V DC
Output Voltage Range 24V DC, 48V DC
Operating Temperature Range
0°C to 60°C (32°F to 140°F)
Storage Temperature Range:
-20°C to 70°C (-4°F to 158°F).
Humidity Range:
5% to 95%, non-condensing.
Control Module
Series: 800xA
Input Voltage: 24 V DC
Power Consumption: Typically around 10 W
Operating Temperature: 0°C to 60°C (32°F to 140°F)
Storage Temperature: -40°C to 70°C (-40°F to 158°F)
Humidity: 5% to 95%, non-condensing
Terminator Box
General Information
Product ID:3BSE005881R1
ABB Type Designation:TX560
Catalog Description:TX560 Terminator
Long Description:Terminator Box
BACKPLANE CONTROLLER CARD
Power Supply:24V DC
Current Consumption:0.5 - 1A
Data Rates and Bandwidth 10 Mbps and 100 Mbp
Operating Temperature: 0°C to 55°C (32°F to 131°F)
Storage Temperature:-20°C to +70°C
Humidity:5% to 95% (non-condensing)
Robot Ethernet Board
Power Supply: 24V DC
Data Rate: 10/100/1000 Mbps
Current Consumption:< 1A
Voltage Tolerance:18-30 V DC
Ethernet/IP, Modbus TCP
Operating Temperature:0°C to 55°C
Storage Temperature:-20°C to +70°C
GASKET HW. SERVO 4
Manufacturer: ABB
Model Number: 3HNM12512-1
Product Type: Gasket
Temperature Resistance: -40°C to +120°C
GASKET HW. SERVO 4
Manufacturer: ABB
Model Number: 3HNM12512-1
Product Type: Gasket
Temperature Resistance: -40°C to +120°C
GEAR PUMP
5 to 100 L/min
0.5 to 10 cm³/rev
operating pressures up to 160 bar
10 to 2000 cSt
Operating Temperature: Typically -10°C to +90°C
Storage Temperature: -40°C to +100°C
Robot Rubber Gasket
Manufacturer: ABB
Model Number: 3HNM09802-1
Product Type: Robot Rubber Gasket
Temperature Resistance: -40°C to +120°C
CABLE PRESSURE TRANSDUCER
High precision within ±0.5%
Output Signal:Standard 4-20 mA
Typically around 250 ohms for 4-20 mA output
Operating temperature range: -40°C to +85°C
Storage temperature range: -50°C to +100°C
Operating Voltage:24 VDC
Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.