Power Supply Module
Two modules in case of
dual-redundant configuration.
Power supply to the I/O modules
and supply power to the transmitters
The power supply terminals use M4 screws
396581013
DISCONTINUED BY MANUFACTURER
COMMUNICATION MODULE
400 MA AT 3.3 VDC
510 MA AT 24 VDC
2 X 9-PIN MALE CONNECTORS
RADIO PORT
RJ45 MODEM PORT
LED INDICATORS
TMPU1002
DISCONTINUED BY MANUFACTURER
MPU TRANSITION MODULE
COPPER TRANS MOD FOR EXTREME ENG CPU 18-410051-001 DUAL DIODE MODULE
DIN
6A DUAL DIODE MODULE
Output Frequency:50 kHz
Processing Capacity:High-speed data processing
Communication Protocol:Supports multiple industry-standard protocols
Operating Temperature:-40°C to +70°C
Memory Size:Extended memory capacity for enhanced system functionality
Model: CL6343X1-A1 (34B2790X032)
System: Emerson PROVOX DCS
Function: Control and monitor discrete (on/off) I/O signals for industrial process automation
Input/Output: Discrete signal input and output (typical voltage 24V DC)
Installation: Control cabinet or rack installation
Communication: Integrated with PROVOX DCS system, supporting real-time data exchange
Power supply: Standard DC power supply compatible with PROVOX system
Part Number: 4000094-316
Type: I/O Cable
Compatibility: Compatible with TRICONEX safety systems, typically used with I/O modules and other system components for data transmission.
High-quality insulation for protection against environmental factors.
Designed to withstand high temperatures, vibration, and harsh industrial environments.
Reliable performance for continuous monitoring and control in critical processes.
Manufacturer: Triconex
Model: 7400195-210
Type: Communication Module
Operating Temperature: 0°C to +60°C (32°F to 140°F)
Storage Temperature: -40°C to +85°C (-40°F to 185°F)
Humidity Range: 5% to 95% RH
Model: 51401072-300
Type: Memory Board
Function: Used in process control systems
System Compatibility: Honeywell TDC 3000 Process Control System
Operating Temperature Range: 0°C to 60°C (32°F to 140°F)
Model: DSQC 501
Part Number: 3HAC3617-1
Type:Backplane Board
Input Voltage: Typically 24V DC
Operating Temperature: Typically 0°C to 50°C.
Storage Temperature: -20°C to 70°C.
Humidity: Up to 95% RH (non-condensing)
Model: DSQC 328
Part Number: 3HAB7229-1
Type:Digital I/O Relay Board
Input Voltage:24V DC
Storage Temperature: -20°C to 70°C.
Input Voltage: Typically 24V DC
Power Consumption: Typically around 15-30W
Current Rating: Typically 1A at 24V DC
Humidity: Up to 95% RH (non-condensing)
Model: DSQC503A
Part Number: 3HAC18159-1
Type: Axis Computer Board
Operating Temperature: Typically 0°C to 50°C.
Storage Temperature: -20°C to 70°C.
Input Voltage: Typically 24V DC
Power Consumption: Typically around 15-30W
Current Rating: Typically 1A at 24V DC
Humidity: Up to 95% RH (non-condensing)
Model: DSQC504
Part Number: 3HAC5689-1/03
Type: CONNECTION BOARD
Operating Temperature: Typically 0°C to 50°C.
Storage Temperature: -20°C to 70°C.
Humidity: Up to 95% RH (non-condensing).
Model: DSQC505
Part Number: 3HAC4296-1
Type: Power Supply Unit
Input Voltage:AC 100-240V (50/60 Hz)
Output Voltage:24V DC
Output Power:Typically 100W or more (depends on load)
Current Rating:Around 4A at 24V DC
Efficiency: High efficiency for industrial use
Parameter:Value
Voltage Rating:24 V DC
Current Rating:≤ 3 A
Signal Type:DeviceNet™ communication + Power supply
Conductors:11 cores (twisted pairs)
Shielding:Double-layer braided copper shield
Impedance:120 Ω
DIN Rail mounted managed Ethernet switch (wall mounting possible)
Metal housing
Up to 10 ports (electrical, optical or SFP cages)
Up to 3 GbE ports (electrical, SFP or Combo ports)
Multimode and Single Mode versions available
Huge variety on optical ports (e.g. SFP cages, SC, ST)
SFP’s in various versions available (MM, SM, single fibre)
Low voltage (18 - 60 VDC) or high voltage (48 - 320 VDC, 90 - 265 VAC) power supply
Redundant power supply possible
Typical power consumption: 12 - 21 W
Input Voltage: 100-120V or 200-240V
Output Voltage: 24V
Output Current :5A
Power Output: Up to 120W
Operating Temperature: -10°C to +55°C
Storage Temperature: -20°C to +70°C
Linear or rotary motion control valve
±0.5% of span (including linkages)
0.3% of span *1
Digital: FOUNDATION fieldbus
Supply voltage: 9 to 32V DC
Supply current: 17 mA (max)
140 to 700 kPa (20 to 100 psi)
0.32 Nm3/h (0.178 SCFM) at 140 kPa (20 psi) of air supply
6.6 Nm3/h (4.1 SCFM) at 140 kPa (20 psi) of air supply
-40 to 85 deg C (-40 to 185 deg F)
Input Voltage:24 V DC (±20%)
Power Consumption:≤ 5 W
Output Power:24 V DC to modules
Communication Ports:1 × RS-485
Data Rate:Up to 12 Mbps
Isolation:500 V AC
Harmony-07
Control Processor Module
High-performance processing unit for real-time control and data processing
Supports industrial communication protocols such as Modbus, Profibus, Ethernet/IP
24V DC
-20°C to +60°C
SPK800-PBA1-01
Cable
1.0 Meter
PBA800 interface
HN800 device interface
Supports TER8x0 terminator to redundant PBA800 adapters for connection
Digital signal transmission
TRL810K2
Terminal Module
8 channels
Analog or digital input/output, depending on the specific configuration
Typically 24V DC or as required by the system
20°C to +60°C
NTRO05-A
Digital Output Module
5 channels
Relay output or transistor output
4 V DC or 120 V AC output, depending on configuration
Maximum output current per channel: 1 A
24 V DC power supply
Input Voltage:24 V DC
Power Consumption:≤ 8 W
Time Sync Input:IRIG-B (modulated/dc level)
Signal Voltage:TTL/RS-422 compatible (0–5 V DC)
Accuracy:±1 ms
Time Resolution:1 ms
Isolation:1500 V AC
SPSEM11
SOE Master Module
Sequence of Events Recording
Accurate to millisecond level
Typically supports Ethernet, MODBUS, or other industrial protocols
Operating temperature range: -20°C to +60°C
PHARPSPEP21013
Power Entry Panel
Dual Chassis Design
Typically supports AC or DC input, depending on the application
Appropriate current based on load requirements
Safety Category:Category 3 (EN 954-1)
Response Time:≤ 20 ms
Supply Voltage:24 V DC ±10%
Power Consumption:≤ 2 W
Input Signal:24 V DC (Pulse test: 0.5 Hz, 1 ms)
Input Current:6 mA per channel
IsolationReinforced isolation : 500 V AC
Number of outputs 16-channel, module isolation
Output voltage 24 V DC
Output voltage drop 1 V maximum
External power supply rating 24 V DC, 3.4 A minimum
Maximum leak current at output off status 1.6 mA
Output format Current source
Minimum load current 35 mA
Load resistance range 120 to 685 Ω
Output response time 30 ms maximum
Blocking Voltage 4500 V DC
Reverse Voltage:30 V
Max RMS Current:4000 A
Peak Surge Current :32 kA
Turn-On Time: ≤ 3 µs
Turn-Off Time: ≤ 5 µs
Switching Loss: ≤ 15 kJ/s at 500 Hz
Input Channels:32
Galvanic Isolation:1000 VAC RMS
Isolation Technique:Optical (in IOM)
DI Power Voltage Range:18 to 30 VDC
ON Sense Voltage/Current:13 VDC (min) or 3 mA (min)
OFF Sense Voltage/Current:5 VDC (max) or 1.2 mA (max)
Input Impedance:4.2 K
Absolute Delay Across Input Filter and Isolation:5 ms ± 20%
Rated Voltage:380–480 V AC, 3-phase (±10%)
Rated Current:100 A (at 40°C ambient)
Frequency:50/60 Hz
Leakage Current:< 5 mA (at 480 V AC)
Insulation Resistance:> 100 MΩ (500 V DC)
Dielectric Strength:3000 V AC
3-phase AC: 380–480 V AC
DC Bus Voltage:520–720 V DC
Power Rating:Typically 1–50 kW
Operating Temperature:-10°C to +50°C
Storage Temperature:-40°C to +85°C
Function: ESB Bus optical transport function
Connection method: Star type connection
Chain type connection
Available for both star and chain type connection.
Number of connecting stage: Maximum two
Transmission distance: Maximum 5 km (total two stages)
In case of Vnet/IP system with the R1.03 or later,
the total distance of two stagesis maximum 10 km.
Current consumption: 0.5 A
ESB Bus optical transport function
Connection method:
Star type connection
Chain type connection
Available for both star and chain type connection.
Number of connecting stage: Maximum two
Transmission distance: Maximum 5 km (total two stages)
In case of Vnet/IP system with the R1.03 or later,
the total distance of two stagesis
maximum 10 km.
Current consumption: 0.5 A
Product No. : SNT401-13
Product Type : Optical ESB Bus Repeater Master Module
1 - with no explosion protection
3 - ISA Standard G3 and temperature (-20 to 70°C)
CU1N - Connector unit for ESB Bus
