power interface
C98043-A7003-L1 incl
painted terminals
Power Side:240-690 V AC
Control Voltage: 24 V DC
Terminal Current Rating: 5–20 A
Thermal Compliance:500–600 W
Excitation board
power unit 15 A 4Q
C98043-A7111-L1
Continuous Output Current: 15 A
Output: 160–400 V DC
Input: Logic supply 24 V DC ±10%
Isolation: ≥2500 V AC
Temperature: 0–55°C (non-condensing)
Relative Humidity: ≤95%
AC: 120–480 V AC
DC Voltage Input: 24 V DC ±15%
Relay Outputs:10 A @ 250 V AC
Current Handling: Up to 100 A
Isolation Voltage: Up to 2.5 kV
Secondary Voltage: 12 V/24 V DC
POWER INTERFACE BOARD
RELAY OUTPUTS
WITH ON-BOARD TRANSFORMERS
Signal Interface:24 V DC
Number of Relays:8 to 16 channels
AC Load: 240 V AC @ 8–10 A
DC Load: 24–48 V DC @ 5-8 A
PC BOARD
BACK PANEL
REAR
6RY1703-0GA01
Contact Rating: 5‒10 A @ 24–230 V AC/DC
Isolation Class:24 V AC/DC isolation
Control Side: 24 V DC
Power Circuit: Up to 690 V AC three-phase
POWER INTERFACE BOARD
RELAY OUTPUTS
WITH ON-BOARD TRANSFORMERS
Contact Configuration:Typically SPDT or DPDT relays
Maximum Switching Voltage:250 V AC/DC
Current Rating:5–15 A per relay
Purpose:24 V AC/DC to lower voltage
Control Input(s): 24 V DC
PC BOARD ASSEMBLY
FIELD POWER SUPPLY PC BOARD
Nominal Input: 110-240 V AC
Frequency: 47-63 Hz
Voltage Output: Likely 24 V DC
Operating Temperature: Range of 0°C to +60°C
Humidity Tolerance: ≤95%, non-condensing
SCALANCE SC646-2C
Industrial Security Appliance
For protection of devices and networks
manufacturing and the process industry
for protection of the industrial communication with
firewall and VPN
address conversion (NAT/NAPT)
Connection to SINEMA RC
4x ports electrical 10/100/1000 Mbit/s RJ45 and
2x combo port electrical or optical
10/100/1000 Mbit/s RJ45
100 Mbit/s SFP or 1000 Mbit/s SFP
Inverter snubber Module SML4
Rated Voltage: 510 V to 930 V
Peak Current Handling: 10–20 A
Operating Temperature: -10°C to +50°C
Storage Temperature: -40°C to +85°C
Humidity: Up to 95% non-condensing
Smart Line Module :6TG38-8AA0
Rated power of the SmartLine Module:710
Power loss 50/60 Hz
Rated voltage:
3-ph. 500 V AC -10 % (-15 % < 1 min)
3-ph. 690 V AC +10 %
SIMOVERT SBP Pulse
Encoder Feedback Optional Board
Signal Resolution Support:1024–5000 pulses per revolution
Maximum Input Frequency:≤ 300 kHz
Encoder Supply Voltage:5 V DC or 15–30 V DC
ADAPTER MODULE
SIMOVERT MASTER DRIVES
MOTION CONTROL
FOR COMPACT AND INSTALLATION DEVICES ADB
Voltage Supply: +24 V DC
Operating temperature: 0°C to +55°C
SINAMICS DCM
DC speed regulation excitation board
Output Voltage Range: 0–250 V DC
Field Current Rating: Typically ≤20 A
Enable/Disable Signals: 24 V DC
Temperature Range: 0°C to +55°C (60°C with derating)
Humidity: 5–95% non-condensing
Family:HMI
Series:GP4000 Series
Display type:TFT Color LCD
Display size:7.5"
Resolution:640 x 480 pixels (VGA)
Backlight service life:50,000 hrs. or more
Two-channel SSI interface
Direct interface to most sensors that output SSI
Onboard diagnostics monitor and report errors
Compatible with leading SSI sensors
Onboard fault diagnostics that
constantly monitor system integrity and report errors
Analog Outputs: 4–20 mA
Voltage: 12–24 V DC
Consumption: ≤5 W
Drive Coil Excitation: 10–50 V AC
Standard: -40°C to +70°C (-40°F to +158°F)
Humidity: 0–95% RH (non-condensing)
C-plug
removable data storage medium
For simple device replacement in case offault,
for recording configuration or engineering and application data
can be usedin the following
SIMATIC NET products with C-plug
slot: SCALANCE XC-200,
XP200, XM-400, XR-500,
M-800, W-700, SC-600 and S615
MICROMASTER 440 without filter
380-480 V 3 AC +10/-10% 47-63 Hz
constant torque 0.37 kW overload 150% 60 s
200% 3 s square-law torque 0.37 kW
protection IP20 ambient
temperature -10+50 °C without AOP/BOP
Occupies one slot in the I/O chassis
Two isolated RS-422 serial
ports for remote multiplexed I/O
Analog Input: 4–20 mA, 0–10 V DC, RTD (Pt100)
Analog Output: 4–20 mA, 0–10 V DC
Channels: 16–32 multiplexed channels
Scan Rate: <10 ms per channel
Analog: 16-bit ADC/DAC
Channel-to-channel: 250 V AC
Input Voltage: 24 V DC ±10%
Sixteen input points
Hot-replaceable
Complete, automatic testing of all input circuits
Automatic line monitoring detects
open and short field wiringfaults
2500 volt minimum electrical
isolation between field and logiccircuits
1751SLBA
SYNCHLINK BASE BLOCK
CONVERTS SYNCHLINK TO ELECTRICAL SIGNALS
TO INTERFACE UP TO 4 FIBER 4-PORT SPLITTER BLOCKS
1.2 AMP
600 MA
24 VDC
OPEN STYLE
MOUNTABLE
1444RELX0004RB
EXPANSION RELAY MODULE
4 SINGLE POLE DOUBLE THROW RELAYS
CONNECT UP TO THREE TO
ONE 1444-DYN04-01RA
DYNAMIC MEASUREMENTMODULE.
REQUIRES 1444-TB-B BASE
AND 1444-REL-RPC- CONNECTOR SET
Current consumption:1110 mA 5 V DC
Module format:Double
Operating altitude:0...6561.68 ft (0...2000 m)
Protective treatment:TC
Analogue I/O processor:80 I/O
Discrete I/O processor:1024 I/O
Concept:Transparent Ready
Software Designation:PL7 Junior/Pro
Display Size:10.4 in
Manufacturer:Rockwell Automation
Product Family:PanelView Plus Operator Terminals
Operator Input:Touch
Resolution:640 x 480
Toiuchscreen:1 million presses
Input Voltage range:18-32VDC
Communication:Ethernet and RS-232
Input Power:18 to 32 VDC
Memory:64 MB
Software designation:PL7 Junior/Pro
Number of racks:6 4/6/8 slots;8 12 slots
Discrete I/O processor:1024 I/O
Number of application specific channel:32
Current consumption：1360 mA at 5 V DC
Module format：Double
Operating altitude：0...2000 m
Input Voltage: 24 V DC
Input Range: 10–30 V DC
Number of Input Points: 32 points
Input Current: 3–5 mA per point
Isolation: 1500 V AC
Backplane Power: 5 V DC
Field Power: External 24 V DC supply for I/O
Input Delay: ≤ 1 ms
SIMATIC S7-1500
Analog input module AI 8xU/I HS
16 bit resolution,
Accuracy 0.3% 8 channels in groups of 8
Common mode voltage 10 V
Diagnostics; Hardware interrupts 8 channels in 0.0625 ms Oversampling;
Delivery including infeed element
ZIEHL-ABEGG FB063-6EQ.4I.V4L
230V 2.3A 0.47KW Cooling Fan
ZIEHL-ABEGG substitute
without enclosure and grille
AC/DC:AC
Size :630 mm x 630 mm x mm
Current:2.3A
Power:0.47KW
Voltage:230V
Linear Measurement Range:2 mm (80 mils)
Initial Air Gap:0.5 mm (20 mils)
Incremental Scale Factor (ISF):
ISO: 8 V/mm (203.2 mV/mil) ± 5%
temperature range 0 to 45°C(+32 to +113°F)
Deviation from best fit straight line(DSL)
± 0.025 mm (± 1 mil)
temperature range 0 to 45°C(+32 to +113°F)
Linear Measurement Range:2 mm (80 mils)
Initial Air Gap:0.5 mm (20 mils)
Incremental Scale Factor (ISF):
ISO: 8 V/mm (203.2 mV/mil) ± 5%
temperature range 0 to 45°C(+32 to +113°F)
Deviation from best fit straight line(DSL)
± 0.025 mm (± 1 mil)
temperature range 0 to 45°C(+32 to +113°F)
Product Type:Gas & Liquid Flow Computer
Slot(s):1
Rack Type:Local or Remote
Data Transfer Type:Ladder Logic
RAM:128 MB min
Hard Drive Space:100 MB min
Pentium PC:100 mHz or faster
Backplane Current Load:800 mA @ 5V DC
Memory Main:256 MB with ECC
Static RAM:2 MB with ECC, backed up by battery
1 GB on-boad flash memory
2 Ethernet ports : RJ45 modular jacks
SB bus (duplex)
Supply voltage:5 V DC ±5 %
Current consumption:Max.1200 mA
3-Phase
With or Without Radio Interference Suppression
Varied Supply Voltages
SEW Eurodrive MOVIDRIVE MCH4xA Series
Compact Drive Inverters offer varied supply supplies
with a 3-Phase connection type
Part Number:2711P-RDB7C
Description:Display Module
Resolution:640 x 480
Display colors:18-bit color graphics
Luminance:300 cd/m2 (Nits)(3)
Input interface:Touch / Keypad
Anti-Glare overlay:not included
Touch Input:8-wire analog resistive
Resolution:640 x 480
Display colors:18-bit color graphics
Luminance:300 cd/m2 (Nits)(3)
Anti-Glare overlay:not included
Touch Input:8-wire analog resistive
Touch interface lifespan:1 Million actuations
Actuation force:10-110 g
Part Number/Catalog No.2711P-RDT7C
Series:PanelView Plus
Input:Touch
Display:7-inch Color
Part Number:2711P-RDT12C
Description:Display Module
Display Size:12.1 inches
Display Area:246 x 184 mm (9.7 x 7.2 in.)
Resolution:800 x 600
Display colors:18-bit color graphics
Luminance:300 cd/m2 (Nits)(3)
Input interface:Touch
Series:FPS
Model:FPS1000
Input:Single-phase
Input Voltage Range[AC]:85 to 265Vac
Input Voltage Range[DC]:Efficiency 86% Typ.
Rated Output Voltage[DC]:24Vdc
Output Voltage Range[DC]:21.5 to 29Vdc
Maximum Output Current:40A
Maximum Output Power:960W
SIMATIC ET 200SP
analog HART input module
AI 4XI 2-wire HART High Featuresuitable
for BU type A0, A1
color code CC03
channel diagnostics
16-bit, +/-0.3%
COMMUNICATION MODULE
ETHERNET/IP TO MODBUS MASTER/SLAVE
2 CONNECTION PORTS
1 ETHERNET PORT
RS-232/RS-422/RS-485
110-115 KBPS DATA TRANSFER RATE
50/60 HZ
LED STATUS INDICATORS
DIN RAIL MOUNT
REPLACEMENT: PLX31-EIP-MBS
Industrial heating systems
AC motor soft starters and speed controllers
Lighting control
Power factor correction systems
Input Voltage:100–480 V AC
Output Current:15–25 A
Gate Trigger Voltage:3–12 V DC
Gate Trigger Current:50–150 mA
Rated Blocking Voltage:4500–6500 V
Rated Average Current :1500 A
Surge Current:25–30 kA
Gate Trigger Voltage:3–5 V
Gate Trigger Current:200–500 mA
Turn-Off Time:10–30 µs
Max Junction Temperature:125–150°C
Case Temperature Range:-40°C to +80°C
Thermal Resistance:0.005–0.01°C/W.
AC Voltage:0–600 V AC
DC Voltage:0–1000 V DC
Isolation Voltage:2500 V AC
Output Signal:0–10 V DC or 4–20 mA
Accuracy:±1% full scale
Frequency Response:50/60 Hz
Intel Atom E3800 processors (Bay Trail)
Up to quad-core CPU performance
Powerful graphics (Intel HD graphics)
Compact dimensions
2x Gigabit Ethernet
SDL/DVI or SDL3
1x USB 3.0, 1x USB 2.0
1x CFast slot
1x slot for interface options
Fanless operation
MICROLOGIX 1200
24V DC POWER
(20) STANDARD 24V DC AND (4) FAST 24V DC DIGITAL INPUTS
(8) RELAY OUTPUTS
(7) STANDARD 24V DC FETOUTPUTS
(1) FAST 24V DC FET OUTPUT
SIMATIC PCS 7-400
UR2-H XTR S7-400 rack
central and distributed with 2 x 9 slots,
2 x 2 redundant PS can be plugged in
for extended temperature range
and with conformal coating
1762MM1
MEMORY MODULE
MICROLOGIX 1200
8K-WORD
PROGRAM & DATA BACK-UP
PROGRAM COMPARE
DATA FILE DOWNLOAD PROTECTION
WRITE PROTECTION
REMOVE/INSERT UNDER POWER
Input Power Voltage: 24V DC (±15%)
Power Consumption: <10W
Digital I/O: 24V DC logic levels for start/stop
Analog Inputs: 0–10V or 4–20mA
Temperature: -10°C to +50°C (derating above 40°C).
Humidity: <95% non-condensing (IEC 60721-3-3).
Vibration Resistance: ≤5.9 m/s²
