Power Specifications
Input 30 VDC at 8 A (max)
Environmental Specifications
Ambient Temperature -40 to 70o C
Shock 10g ½ Sinewave for 11 msec
Vibration 1mm Peak to Peak from 5 to 16Hz;
0.5g from 16 to 150Hz
Airborne
Contaminants
ISA-S71.04 –1985 Airborne
Series: SDCS
Operating Voltage: Typically 24V DC
Power Consumption: 5-10 W
Current Consumption: 200-400 mA
Operating Temperature Range: -20°C to 70°C (-4°F to 158°F)
Storage Temperature Range: -40°C to 85°C (-40°F to 185°F)
5 0 5.0 metres (16.4 feet)
system length,panel mount
0 0 No Approvals
Probe Diameter:25 mm (0.98 in)
System Length:5.0 m (16.4 ft)
Output Signal:-4 to -20 V DC
Sensitivity:8.0 V/mm (200 mV/mil) ± 2%
No. of inputs:Twelve (12) Single Ended
Conversion Type:Successive Approximation
Terminal base: 1794-TB3G; 1794-TB3GS
Indicators:1 green/red power/status indicator
External DC supply, nom:24V DC
Mounting:DIN Rail
Operating Temperature:0 to 55 C (32 to 131 F)
Storage Temperature:–40…85 °C (–40…185 °F)
Power Dissipation:6.1 W @ 19.2V DC
Thermal Dissipation:20.8 BTU/hr @ 24V DC
Product Description:Redundant Ethernet Adapter Module
Communication Port:Two (2) RJ45
Supported Protocol:Ethernet I/P
Supported topologies:Linear
Data Transfer speed:10 to 100 Mbps
Indicators:Mod Status; Network Status;
Link1 Status; Link2 Status
Mounting:DIN Rail
Power Dissipation:2.0 W
No. of outputs:Eight (8),
No. of groups:1 group of 8
Output signal:10-28.8 VDC
Surge current:2 A for 10 ms, repeatable every 3 s
Current Draw:75 mA @5V dc
Output Voltage:24 Volts DC
Electronically Protected:Yes
POINTBus Current:75 milliamps
Output Current:3 amps/module
Manufacturer:Rockwell Automation
Power Dissipation:1.6 Watt/5.5 BTU/hour
POINTBus Current:75 mA
Input Voltage:24 Volts DC
Module Type:Digital DC Sinking Input
Series:POINT I/O
No. of Inputs:8; Sinking input
Input Voltage range :10-28.8VDC
Input Current range:2-5mA
Input Current, nominal:4mA @24VDC
Input Voltage: 24 VDC
Current Consumption: Typically 1.5 A
Operating Temperature: 0°C to +60°C (32°F to 140°F)
Storage Temperature: -40°C to +85°C (-40°F to 185°F)
Humidity: 5% to 95% relative humidity, non-condensing
Processing Speed: Typically 50 to 100 MHz
Processor Type: 32-bit microprocessor
Manufacturer:GE Fanuc
Series:Field Control
Part Number:IC670MDL241
Product Type:Input Module
Number of Inputs:16
Number of Input Groups:2
Voltage Type:AC
Ensured cybersecurity — ISA EDSA certified
Online image upgrade (OLUG)
Accepts four PIO channels
(four separate HDLC fieldbuses)
Plant-wide data integration
Rated for Class G3 harsh environments
CE-certified for field mounting in enclosures
Series MicroLogix
Mounting Type DIN Rail
Part Number/Catalog No. 1762-OW16
Isolated Groups 2
Outputs (16) AC/DC Relay
Voltage Category AC/DC Normally Open Relay
Mounting Type DIN Rail; Panel Mounting
UPC 10611320152149
Channels Per group Eight (8)
Signal Delay 10 ms
Max. Current per point 2.5 A
Shipping Weight 0.63 pounds
3-wire VoltageMode10 kΩ
Bias Voltage -24 V
Vibration Variables ±1% of full scale range
Minimum Switched Current 12Vdc/100mA
Current Source 3.3 mA ± 5%
Open Circuit Voltage21 to 24 Vdc
Isolation Voltage: Typically ≥4 kV.
Input/Output Ratio: 1:1 or custom turns ratio .
Frequency Range: Optimized for 1–50 kHz
Primary Voltage: 5–24 V DC
Peak Current: 2–5 A
Module Type:Network Slave Module
Number of Stations:32 w/out repeaters,
up to 125 with
I/O Data: 384 Bytes
Connector:9-pin D-sub
Network Data Rate: 9.6 Kbaud to 12 Mbaud
Power Consumption: 460 mA from 5 V output
SIMATIC S7-1200
CPU 1214C, compact CPU
DC/DC/DC, onboard I/O: 14 DI 24V DC
10 DO 24 V DC; 2 AI 0-10 V DC
power supply: DC 20.4-28.8 V DC
program/data memory 150 KB
Series: Foxboro I/A Series DCS
Input Signals:4-20 mA or 0-10 V D
Output Signals:4-20 mA or 0-10 V DC
High accuracy with typical resolution of 16 bits
Input accuracy: ±0.1%
Operating temperature: Typically 0°C to 60°C (32°F to 140°F)
Storage temperature: -20°C to 70°C (-4°F to 158°F)
330104-06-06-90-02-05
DISCONTINUED BY MANUFACTURER
PROXIMITY PROBE
3300 XL 8 MM
5.0 INCH OVERALL CASE LENGTH
1.0 M (3.3 FT) TOTAL LENGTH
3/8-24 UNF THREAD
WITH ARMOR
0 5 0-5 mils pp (0-125 μm pp)
0 1 35 mm DIN rail clips
0 0 Not required
Power : Requires +12 to +35 Vdc
input at the transmitter terminal.
Maximum Loop Resistance :
1,000 Ω including cable at 35 Vdc.
Current Limiting : 23 mA typical.
IC693MDL655
DISCONTINUED BY MANUFACTURER
INPUT MODULE
32POINT
LOGIC
SERIES 90-30
POSITIVE/NEGATIVE
7 AMP MAX
24 VDC
Tariff Code: 8538908180
Country of Origin: United States
Connections A , B and M
Transmission rate 9.6 kBit/s to 12 MBit/s
Type RS 485
Connection 9-pin Sub-D connector
Electrical isolation VDE 0110, functionally isolating
Test voltage 500 Veff
Device protection class 3
SIMATIC S7-300
CPU 315-2DP
Central processing unit with MPI Integr
powersupply 24 V DC
Work memory 256 KB 2nd
interface DP master/slave
MicroMemory Card required
