ADAPTER MODULE
USB TO RS-485
SIMATIC S7
PC ADAPTER USB F
CONNECTION OF S7-200/300/ 400 C7
WITH USB-CABLE 5M
CAN BE USED UNDER WINXP/VISTA/ WINDOWS 7
32/64BIT
REPLACED BY 6GK1571-0BA00-0AA0
Supported no. of I/O modulesUp to 256
Input data Words:122 Words
No. of DP slaves:Up to 125
Backplane Current: 850 mA @ 5 VDC; 1.75 mA@24 VDC
Maximum number of modules per rack 8 modules
DPV0 Slave function:Supported
Product Type:SST PB3 In Chassis Module
Digital output modules with 16 or 32 outputs
Outputs 24 VDC (DO216, DO232, DO232 CC)
16 outputs with 2.5 A or 32 outputs with 1 A
Outputs parallel connectable
Monitoring of short circuit, wire break and overload
Compact design
Status display for each channel via LED
Wires: 3-core
Wire Gauge: Likely 22 AWG
Voltage Rating: ≤30V DC
Current Rating: ≤2A
Type: M12 connectors
Temperature Range: -25°C to +70°C
Max Loop Resistance: Verify at 24V
Voltage Rating: ≤30V DC
Current Capacity: Up to 2A
Conductors: 4-core design
Temperature Range: -25°C to +70°C
Certifications: Likely CE, RoHS, UL, REACH
Number of Conductors: 4-wire
Insulation Material: PVC or PUR
Voltage Rating: ≤ 30V DC
Current Rating: ≤ 2A
Interface: M8/M12 Connectors
Temperature Range: -25°C to +70°C
Type: I/O-Link Communication Cable
Application: Connects I/O-Link Masters
Conductors: 4-core
Wire Gauge: 24 AWG or 22 AWG
Voltage Rating: Up to 30V DC
Current Capacity: ≤2A
Operating Temperature: -25°C to +70°C
Certifications: CE, RoHS, UL
Max Data Rate:230.4 kbps
Conductors: 4-core (likely 24 AWG)
1 power supply (+24V DC)
1 ground (GND)
2 signal lines (C/Q and L+)
Voltage Rating: 15–60 V DC insulation
Current Capacity: ≤4 A per channel
2711B6C2
DISCONTINUED BY MANUFACTURER 12/31/2012
PANELVIEW 600
COLOR TERMINAL
6-INCH
KEYPAD/TOUCHSCREEN
DH-485 COMMUNICATION PORTS
AC POWER
OPERATOR INTERFACE
0.35-0.6 AMP
100-240 VAC
50/60 HZ
75 VA
I-O Memory:0.98 MB
Module Type:Processor Module
User Memory:4 MB
Maximum I-O 128,000
Communication:1 port USB
Maximum Analog I-O:4,000
Maximum Digital I-O:128,000
User Memory:4MB
Power Dissipation:2.5 Watts
Backplane Current (5.1 Volts DC) 800 mA
Isolation Voltage:30 Volts Continuous
Relative Humidity:5-95 percent
CF9 Control Firewall Input/Output Termination Assembly
Medium Single-Mode Glass Fiber 9/125
Wavelength 1300 nm
Maximum Distance 15 km (9 miles)
Connector LCVoltage 3.3 V
Temperature Industrial -40 C to +85 C (-40 F to +185 F)
Form Factor SFP
Power 1 W Approximately
Product type : Control Firewall Module
Provides efficient distribution of
FTE cables to multiple Series C FIMs.
Module mounts on CF9 Input/Output
Termination Assembly (IOTA).
Provides FTE distribution to in-cabinet network nodes.
(C300 Controllers and Series C Modules)
Supply Rating: 0.112A @ 24VDC
51 5.0 meters (16.4 feet) system length
DIN mount
Input Power:-24 V DC (±10%),
Gap Voltage: -2 to -18 V DC
AC Vibration: 0–22 V pk-pk
Channels:1 channel per module
Frequency Response:0.5 Hz to 12 kHz (±3 dB)
LED Indicators: Power (Green)
Terminals:Screw-clamp terminals (2.5 mm²)
330103 3300 XL 8 mm Probe
M10 x 1 thread,without armor
Minimum unthreaded length: 50 mm
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector
standard cable
00 Not required
Voltage: 24 V DC (±20%)
Power Consumption: ≤15 W
500 V AC channel-to-channel
Temperature: -25°C to +70°C (-13°F to +158°F)
Humidity: 5–95% RH (non-condensing)
Input Voltage: Typically 24 V DC
Current Consumption:100-200 mA
Operating Temperature: -20°C to 60°C
Storage Temperature:-40°C and 85°C
Humidity: 5% to 95% non-condensing humidity
