ALL MANUFACTURERS

Smart Line Module

AC Input Voltage:3-phase, 380–480 V AC ±10%
Rated Input Current:41 A 
DC Link Output Voltage:510–720 V DC
Rated DC Link Power:30 kW
Peak Power:45 kW 
Efficiency:>98.5% 
Power Factor:≥0.99 

TSE capacitor module

TSE capacitor module DCM
Rated Voltage:6.9 kV AC
Rated Current:50 A (continuous)
Tuned Frequency:150–250 Hz (configurable)
Capacitance:30 µF (per phase, ±5%)
Dielectric:Dry-type polypropylene film
Insulation Resistance: ≥1000 MΩ (at 25°C)

Inverter control Module

Inverter control Module 
IGD8 for devices 500-690V 3 AC
50/60 Hz and 675-930V DC
570A and 1080A

Parallel connection module

Parallel connection module 
For infeed units 3 AC 500-575V
50/60Hz und 660-690 V 3 AC
50/60 Hz

SMART LINE MODULE

SINAMICS S120 SMART LINE MODULE 
INPUT: 3AC 380-480V, 50/60HZ 
OUTPUT: 600VDC, 17A, 10KW 
FRAME SIZE: BOOKSIZE INTERNAL 
AIR COOLING 
INCL. CONTROL VOLTAGE 
ADAPTER MODULES PAINTED

Rectifier interfaces Module

Rectifier interfaces Module 
PER2 for infeed/regenerative 
feedback Supply units 
with Designs H and K 
380-480 V 3 AC, 50/60 Hz

proximity sensor

From the vibro-meter® product line
Conforms to API 670 recommendations
1, 5 and 10 m systems
Temperature-compensated design

Circuit Breaker Relay Module

 LS-5 Series relays
Power supply:12/24 Vdc 
Rated (Vrated):69/120 Vac
Max. value (Vmax):86/150 Vac
Input range:12/24 Vdc (8 to 40 Vdc)
Intrinsic consumption:max.~ 5 W.

POWERFLEX CONTROL BOARD

POWERFLEX CONTROL BOARD
9 PIN CONNECTOR
Voltage Class: 240V AC Input
Drive Model: PowerFlex 700S

ANALOG I/O MODULE

SIMATIC S7-1200
ANALOG I/O SM 1234
4 AI/ 2 AO, +/-10V
14 BIT RESOLUTION
OR 0-20 MA
13 BITRESOLUTION

Digital I/O MODULE

SIMATIC S7-1200
Digital I/O SM 1223
16 DI/16 DO, 16 DI 24 V DC
Sink/Source, 16 DO
transistor 0.5 A

Robicon Cell control board

Memory:512 KB SRAM
ADC Channels:8x 16-bit
Cell Status Output:Relay contacts 
Supply Voltage: 24 VDC (±10%) via backplane
Consumption: 18W (typical)
PWM Frequency:0–2.5 kHz 
Voltage Accuracy:±0.5% FS (DC link)
Fault Response:<5 µs

PLC BOARD

CPU:32-bit RISC processor 
Clock Speed:100–200 MHz
Operating Voltage:24V DC (18–32V DC)
Isolation :1500V AC (I/O-to-logic)
Temp Range:-40°C to +85°C
Humidity:5–95% non-condensing

I/O Power Supply Chassis

19 inch x 1U chassis for up to 3 Power Packs.
Chassis Type:Main Chassis 
Input Voltage:120V AC 
Output Power:Distributes +5V DC

Power Distribution Module

Input Voltage:120V AC
Power Rating:120W
Motor Speed:3600 RPM
Airflow Capacity:20 CFM
Noise Level:35 dB

Trusted TMR Controller Chassis

CHASSIS TRUSTED CONTROLLER
Architecture:3-channel TMR
Safety Certification:SIL 3 (IEC 61508/61511)
Slots:12 slots
Backplane Bandwidth:100 Mbps dual-redundant TMR bus
Input: 24V DC (18–32V range)
Redundancy: N+1 hot-swap PSUs
Per PSU: 250W @ 24V DC

spring-operated brake

Fail-safe spring applied-brake
Adjustable service brake and holding brake
Standard modular system with many options
9 sizes from 1.5 Nm to 720 Nm
Reducible brake module (Type E)
TÜV-Nord safety certificate
UL-certified

Power Monitor Board

Input Voltage/Current: ±1% accuracy.
Temperature/Humidity: Via external sensors 
Fan Speed Control: PWM-based regulation.
Power Consumption:≤5 W
Operating Temp.:-5°C to +55°C (23°F to 131°F)
Relative Humidity:5%–95% (non-condensing)

Thyristor Unit

Gate Commutated Turn-off (GCT) Thyristor Unit
Allen-Bradley SMC™-3 Soft Starters
Rated Voltage: 110-120V AC
Rated Current: Typically 17 Amps 
Power Rating: 110-120V AC

Thyristor Unit

Gate Commutated Turn-off (GCT) Thyristor Unit
Allen-Bradley SMC™-3 Soft Starters
Rated Voltage: 110-120V AC
Rated Current: Typically 17 Amps 
Power Rating: 110-120V AC

Thyristor Unit

Gate Commutated Turn-off (GCT) Thyristor Unit
Allen-Bradley SMC™-3 Soft Starters
Rated Voltage: 110-120V AC
Rated Current: Typically 17 Amps 
Power Rating: 110-120V AC

LOGIC MODULE

LOGIC MODULE
PANELVIEW PLUS
FOR USE WITH PANELVIEW PLUS 700-1500
SINGLE APPLICATION
VIEWPOINT COMPATIBLE
64 MB FLASH / 64 MB RAM
24 VDC

Inverter control Module

Inverter control Module 
IGD7 for devices 500-690V 3 AC
50/60 Hz and 675-930V DC, 452A

Control Interface Board

MICROMASTER 440 PX 
replacement Control Interface Board 
for 380-480 V 3AC
50/60 Hz
310 A AC Drive

COMMUNICATIONS MODULE

SIMOVERT MASTERDRIVES 
COMMUNICATIONS MODULE  
CB1 FOR STANDARDIZED 
PROTOCOL PROFIBUS DP