4-20 mA current loops
0-5 V or 0-10 V DC voltage signals
Operating Temperature Range: -30°C to +65°C
Storage Temperature Range: -40°C to +85°C
Humidity: 5% to 95% RH, non-condensing
Series: Mark VIe
Simplex Primary Turbine Protection Input Terminal Board
Number of inputs: 4
Number of outputs: 2
MPU pulse rate range: 2 Hz to 20 kHz
Contact voltage sensing: 20 V dc
Technology: Surface mount
Temperature: -30 to +65C
Series:RX3i PacSystem
Part Number:IC695CPE305CA IC695CPE305CA-BCAD
Compatibility:PACSystems RX3i
Clock Speed:1.1 GHz
RAM:5MB
NVRAM:10MB
Serial Ports:2
Communication standards:RS232; RS485
Ethernet Port:One (1)
Maximum Program Blocks:512
Maximum Block Size:128 kilobytes
Number of Slots:1
Number of Local Racks:8
Program Storage:5 MB of User Memory
Type of Memory Storage:SRAM, Flash
Processor Speed:1.1G Hertz
Floating Point:Yes
Serial Communication:RS-232
Ethernet Port:Yes
Mark VI
Triple Modular Redundancy (TMR)
Input Voltage Range: 24 VDC to 125 VDC
Operating Temperature: -30°C to +65°C
Storage Temperature: -40°C to +85°C
Humidity: Up to 95% non-condensing
3 independent trip solenoids
Solenoid voltage typically:
24 VDC to 125 VDC
Operating Temperature: -30°C to +65°C
Storage Temperature: -40°C to +85°C
Humidity: Up to 95% non-condensing
Series: Mark VI
Function: Analog Processor Module
Input Voltage: 125 V dc
Output Voltage: 24 V dc
Operating temperature: -30 to +65oC
Mounting: DIN-rail
Model Type: Safety I/O Pack
Form Factor
PMCPCI PMC-422
Signaling: 3.3V and 5V
Specification 2.2
33 MHz/32-bit
3 watts total
0.3A @ 3.3V
0.4A @5V
Eight rear RS485/RS422/RS232 serial ports
Four RS232 ports on front; RJ45 connectors
(frontports are not available for RS485 and RS422)
Voltage Input: ±10V, 0-10V, or 0-5V
Current Input: 4-20 mA
Nominal Supply Voltage: 24 VDC
Power Consumption: 250 mA
Operating Temperature: -40°C to +70°C (-40°F to +158°F)
Storage Temperature: -40°C to +85°C (-40°F to +185°F)
Humidity: 5% to 95% non-condensing
Span: 0.3532 to 4.054 V
Size: 17.8 cm high x 33.02 cm wide
Technology: Surface mount
Temperature Operating: -30 to 65oC
Product Type: Servo Terminal Board
Series: Mark VI
Product Type: Terminal Board
Trip Solenoids: 3
Solenoid Rated Voltage/Current: 125 V dc
Solenoid Response Time: L/R time constant is 0.1 sec
Current Suppression: Metal oxide varistor
Control Relay Coil Voltage Supply: 28 V
Flame Detector Supply Voltage/Current: 335 V dc
Flame Detectors: 8
Input voltage range: 10-30V DC
Output voltage: 24V DC typical
Input: Up to 2mA per channel
Output: Rated for up to 2A per channel
Wiring Capability: typically 16-24 AWG
Operating Temperature: -40°C to +60°C
Humidity Tolerance: Up to 95% non-condensing
Voltage Rating: Up to 250V AC/DC
Current Capacity: Typically up to 10A
Operating Temperature: -40°C to +70°C
Humidity Tolerance:
Up to 95% non-condensing
Power Supply:DC 24V
Digital Input: Typically 24V DC
Operating Temperature:
Typically 0 to 50°C (32°F to 122°F)
Storage Temperature:
Typically -20°C to 70°C (-4°F to 158°F)
Humidity: 30% to 85% RH, non-condensing
Up to 512MB PC100 SDRAM
(PC133 stepped down to 100 MHz)
Built-in SVGA support with 4 Mbytes DRAM display cache
Built-in dual 10/100 Mbit Ethernet
IDE drive support
Floppy drive support
Two RS232 serial ports
Dual USB ports
Real-Time clock/calendar
Front panel reset switch
Miniature speaker
Keyboard/Mouse port
Input Voltage: 24 VDC nominal
Power Consumption: ≤ 15 W
Ethernet Ports: Dual 10/100 Mbps
Operating Temperature: -30°C to +70°C (-22°F to +158°F)
Storage Temperature: -40°C to +85°C (-40°F to +185°F)
Humidity: 5% to 95% non-condensing
Data Transfer Rate: Up to 100 Mbps
POWER CONNECTION MODULE
DC300 SPINDLE DRIVE BOARD
CNC
Input/Output: typically 0-10V, 4-20mA
Operating Temperature Range: Typically -40°C to +70°C
Power Input: Receives AC or DC
Nominal Voltage Options:
24 VDC, 48 VDC, 125 VDC, or 250 VDC.
Input Voltage Range: ±20% of nominal value
Logic 0 (Low): 0-3 V
Logic 1 (High): 15-250 V
Operating Temperature Range: -40°C to +70°C
Storage Temperature Range: -40°C to +85°C
Humidity: 5% to 95% (non-condensing)
Power Supply: Typically 24V DC
Operating Temperature Range: Typically -40°C to +85°C
Storage Temperature Range: -40°C to +85°C.
Humidity: humidity up to 95% (non-condensing).
PC BOARD ASSEMBLY
CMOS MEMORY BOARD
Memory Capacity: 128KB to 1MB
Operating Voltage:operates on +5V DC
Operating Temperature: 0°C to +60°C
Storage Temperature: Typically -40°C to +85°C.
Humidity: Generally 5% to 95% non-condensing
Input voltage 0 to +30VDC,+24VDC nominal
On state voltage +15 to +30VDC
Off state voltage 0 to +5VDC
Off state current 2.0 to 5.5mA0 to 0.5mA
Off response time 0.5ms maximum
Configurable filtertime0 ms, 1.0ms (default), or 7.0ms
Input impedance 10kOhms maximum
Series:Series 90-30
Part Number:IC693MDL752
Product type:Digital I/O
Product Description:Discrete output module
Compatibility:GE Fanuc 90-30 PLCs
No of Channels:Thirty-Two (32)
Output points:32
No. of output groups:Four (4)
Output groups:4
Channels per group:Eight (8)
Maximum inrush current:4.6 A for 20 ms
Output connection:2 x 24-pin connectors
Brand:GE Fanuc
Series:Series 90-30
Range:-10 to +10 Volts
Part Number:IC693ALG390
Product Description:Analog Voltage Output
No of Channels:2
External Supply Voltage Range:18 to 30 VDC
External Supply Voltage Ripple:10%
Isolation:1500 Volts RMS field to the logic side
Update Rate:5 ms all channels
Resolution:2.5 mV
Accuracy:+/- 5 mV at 25 degrees Celsius
Series:VersaMax
Part Number:IC200ALG620
Description:Analog input module
Product Description:4-point RTD / Resistance input module
Resolution:16 bits
Update Rate:210 milliseconds
Compatible RTD Wiring type:3-wire and 4-wire RTDs
Bus Voltage:5 Volts DC
Resistance input range:0-500 Ohms; 0-3000 Ohms
Isolation (Input to Frame):1500 Volts AC
Digital Resolution:15 bits plus sign
Isolation (Input to Logic):250 Volts AC
Frequency:50-60 Hertz
Temperature:0-60 degrees Celsius
Maximum lead resistance:5 ohms per lead
No. of channels: 4 single-ended, one group
Voltage Range: 18 - 30 VDC
Current Range: 4 - 20 mA
Update Rate: 0.3 ms
LED Indicators: FLD PWR, OK
Power Consumption: 50 mA from +5V bus
