ALL MANUFACTURERS

Coupling Unit

Data Rate: Up to 12 Mbps
Isolation:1500 V AC
Power Supply: 24 V DC (±10%)
Power Consumption: Typically 5–10 W
Fieldbus Port: 9-pin D-sub or M12 for PROFIBUS
Operating Temperature: 
-25°C to +70°C (-13°F to +158°F)
Humidity: 5–95% noncondensing

DIGITAL INPUT MODULE

Approvals: CE, TUV, UL, CSA, FM
Number of input channels: 16
Input type: According to DIN (=NAMUR)
Switch level: 1.4-1.9 mA
Hysteresis: 0.2 mA ± 0.05 mA
Field wire resistance: Max. 50 Ω
output voltage 7.9-8.7 V
output current 170 mA (short-circuitproof)3
Maximum load capacitance: 100 nF
Test current: Typically 0.5 mA
Output voltage: Typically 0.5 V DC
Field fault voltage: Max. 250 V AC

Digital Output IOTA Redundant

Output Channels:32
Output Type SINK: (Open Drain)
Load Current :0.1 A per channel (Max)
On-State Voltage 0v VDC (load current @:0.1A max 
Off-State Voltage:24 V (typ),
Off-State Leak Current:100 µA (max)
Turn-On/Turn-Off Time:10 ms (max)

Digital Input IOTA Redundant

Power supply:24V DC
Rated Current:55mA at 24V
Power Consumption:1.32W at 20mA
Power/DCS to Field:1500 VAC
DCS side connections:
37 pin DSUB connector on CC-UGIA01
Voltage Input:24V DC
Interface to DCS:4 to 20mA with HART

Analog Output IOTA Redundant

Power supply 24V DC
Rated Current 55mA at 24V
Power Consumption 1.32W
Power/DCS to Field 1500 VAC
DCS side connections 37 pin 
DSUB connector on CC-UGIA01
Voltage Input 24V DC
Current Input 4 to 20mA with HART, 
CC-UGAI01 in sink mode.
Open wire current <150uA

4 Channel Relay Output Module

Channel-to-Channel: 1500 VAC
Field-to-System: Reinforced isolation :2500 VAC
Per Channel: 1–2 W 
Total: ≤ 8 W 
Operating Temperature: -40°C to +70°C (industrial-grade)
Storage Temperature: -50°C to +85°C
Humidity: 0–95% (non-condensing)

Control panel

Type: LCD or TFT color touchscreen
Operating Voltage: 24 VDC (±10%) or 110–230 VAC
Power Consumption: 10–20 W 
Operating Temperature: -10°C to +55°C 
Storage Temperature: -40°C to +70°C
Humidity: 5–95% (non-condensing)

FIRING PULSE TRANSFORMER BOARD

Model: SDCS-PIN-H41
Part Number: 3ADT320600R1501
Pulse Voltage: 5–24 V DC
Isolated Pulse Voltage: Typically 10–30 V
Output Current: 1–2 A
Primary-to-Secondary Isolation: ≥2500 V AC
Insulation Resistance: >100 MΩ

Fast I/O module

Input Voltage: 24 VDC
Output Current: ≤0.5 A per channel 
Channel-to-Channel: 500 VAC.
Channel-to-Backplane: 1500 VAC 
Operating Temperature: -25°C to +60°C (-13°F to +140°F).
Humidity: 5–95% non-condensing
Supply Voltage: 24 VDC (±10%) via backplane.
Power Consumption: ≤5 W

Digital module

Channels: 16 digital channels
Input Type: 24 VDC
Isolation:500 VDC
Update Rate: ≤10 ms 
Power Consumption: ≤5 W 
Operating Temperature: -40°C to +70°C (-40°F to +158°F).
Humidity: 5–95% non-condensing.

SC S300 SAFETY CONTROLLER SIL3

Input Voltage: 24 VDC (±10%)
Output Voltage: 24 VDC
Current Capacity: Typically up to 5A
Operating Temperature: -40°C to +70°C (-40°F to +158°F).
Humidity: 5–95% non-condensing

SC S300 SAFETY CONTROLLER SIL3

Digital Inputs:24 VDC
Cycle Time: <10 ms 
Operating Temperature: -20°C to +60°C (-4°F to +140°F)
Contact Rating: 5A @ 250VAC
Operating Force: 1.8N minimum
Release Force: 0.1N minimum
Pre-travel: 1.5mm maximum

HVD BOARD

Voltage Rating:  3.3 kV, 6.6 kV
Control Voltage: 24 VDC
Power Consumption: <20 W
Operating Temperature: 0°C to +55°C
Humidity: Up to 95% RH (non-condensing)

I/O TERMINAL BLOCK

FISHER-ROSEMOUNT EMERSON
12P0623X062
I/O TERMINAL BLOCK
KJ4001X1-CA1

Analog Output Module

S-Series AO 4-20 mA HART 8-Channel
Local Bus Power 12 VDC at 150 mA
Bussed Field Power 24 VDC at 300 mA
Field Circuit24 VDC at 23 mA/Channel
Ambient Temperature -40°C to +70°C
Shock 10g ½ Sinewave for 11msec
Vibration 1mm Peak to Peak from 2 to 13.2Hz
0.7g from 13.2 to 150Hz
AirborneContaminantsISA-S71.04 –1985 Airborne
Contaminants Class G3

Analog Output Module

S-Series AO 4-20 mA HART 8-Channel
Local Bus Power 12 VDC at 150 mA
Bussed Field Power 24 VDC at 300 mA
Field Circuit24 VDC at 23 mA/Channel
Ambient Temperature -40°C to +70°C
Shock 10g ½ Sinewave for 11msec
Vibration 1mm Peak to Peak from 2 to 13.2Hz
0.7g from 13.2 to 150Hz
AirborneContaminantsISA-S71.04 –1985 Airborne
Contaminants Class G3

32 Channel Terminal Block

Input Power Rating 30 VDC @ 1 A
AmbientTemperature-40 °C to +70 °C
Shock 10 g half-sine wave for 11 ms
Vibration 1 mm peak to peak from 2 to 13.2 Hz
0.7 g from 13.2 to 150 Hz
AirborneContaminantsISA-S71.04 –1985 Airborne
Contaminants Class G3
Relative Humidity 5 to 95% non-condensing

Analog Input Module

ANALOG MODULE
2 WIRE/16CHANNEL
4-20MA
SERIES 2
LOCALBUS POWER RATING: 12VDC AT 150MA
BUSSED FIELD POWER RATING: 24VDC AT 600MA
FIELD CIRCUIT RATING: 240VDC AT 30MA
RACK MOUNTED

Redundant H1 Terminal Block

Input Power Rating 35 VDC @ 500m A
AmbientTemperature-40 °C to +70 °C
Shock 10 g half-sine wave for 11 ms
Vibration 1 mm peak to peak from 2 to 13.2 Hz
0.7 g from 13.2 to 150 Hz
AirborneContaminantsISA-S71.04 –1985 Airborne
Contaminants Class G3
Relative Humidity 5 to 95% non-condensing 

Fieldbus H1 Card

Local Bus Power 12 VDC at 300 mA
Fieldbus Power 9 to 32 VDC at 12 mA/Port 
AmbientTemperature-40°C to +70°C
Shock 10g ½ Sinewave for 11msec 
Vibration 1mm Peak to Peak from 2 to 13.2Hz;0.7g from 13.2 to 150Hz 
AirborneContaminantsISA-S71.04 –1985 AirborneContaminants Class G3
Relative Humidity 5 to 95% Non-Condensing IP 20 Rating 
Terminal Block keyPosition D6  

Interface Terminal Block

Field Power 35 VDC at 1 A 
AmbientTemperature-40°C to +70°C
Shock 10g ½ Sinewave for 11msec
Vibration 1mm Peak to Peak from 2 to 13.2Hz;0.7g from 13.2 to 150Hz
AirborneContaminantsISA-S71.04 –1985 AirborneContaminants Class G3
Relative Humidity 5 to 95% Non-Condensing 
Terminal Block Key Position Set according to I/O card installed 

Serial Interface Module

SERIAL INTERFACE CARD
12 VDC
300 MA
2 PORT
D4 TERMINAL BLOCK KEY POSITION
Simplex SIC (Serial Interface Card), 
LocalBus Power Rating 12 VDC 300mA
Ambient Temperature -40 to 70 degrees C

Digital Input Module

Input Channels:32
Galvanic Isolation: 1500 VAC RMS or ±1500 VDC
Isolation Technique:Optical (in IOM)
DI Power Voltage Range:18 to 30 VDC
ON Sense Voltage/Current:13 VDC (min) or 3 mA (min)
OFF Sense Voltage/Current:5 VDC (max) or 1.2 mA (max)
nput Impedance:4.2 K
Absolute Delay Across Input Filter and Isolation:5 ms ± 20%

Power Supply Board

Model: SDCS-POW-H01
Part Number: 3ADT318700R1501
Application: Dedicated power supply unit 
Input Voltage Nominal: 24 V DC 
Range: 20–30 V DC
AC Input Option: support 100–240 V AC (50/60 Hz)
Primary Output: 24 V DC 
Continuous: 5–10 A
Peak Current: Up to 15 A

Excitation plate

Model: SDCS-FEX-4a
Part Number: 3ADT314500R1501
Input Voltage Nominal: 24 V DC 
Range: 20–30 V DC
Voltage Range: 0–250 V DC
Current Capacity: Up to 20–50 A 
Continuous Output Power: ~5–10 kW
Reference Input: 0–10 V DC or 4–20 mA

DCSLink communication options board

Supply Voltage Nominal: 24 V DC
Supply Voltage Range: 20–30 V DC
Power Consumption:Typically <5 W
Operating Temperature: -25°C to +70°C (-13°F to +158°F).
Storage Temperature: -40°C to +85°C (-40°F to +185°F).
Humidity: 5–95% RH (non-condensing).

FIRING PULSE TRANSFORMER BOARD

Model: SDCS-PIN-H41
Part Number: 3ADT320600R1501
Pulse Voltage: 5–24 V DC
Isolated Pulse Voltage: Typically 10–30 V
Output Current: 1–2 A
Primary-to-Secondary Isolation: ≥2500 V AC
Insulation Resistance: >100 MΩ

Power supply board

Model: SDCS-PIN-H51
Order Code/Part Number: 3ADT320700R1501
Nominal Input Voltage: 24 V DC 
Input Voltage Range: 20–30 V DC 
Primary Output: 24 V DC
Output Current: Typically 2–5 A
Continuous Power: ~60–120 W
Typically ≥85%

Redundant Net Interface Module

REDUNDANT NET INTERFACE MODULE
CAGE CARD
24 VDC
(PN-14251 / 14251)

Power Controller 2 Wide Carrier

Input :30 VDC at 8 A (max)
Ambient Temperature :-40 to 70o C 
Shock 10g ½ Sinewave for 11 msec
Vibration 1mm Peak to Peak from 5 to 16Hz
0.5g from 16 to 150Hz 
AirborneContaminantsISA-S71.04 –1985 
AirborneContaminants Class G3 
Relative Humidity 5 to 95% Non-Condensing IP 20Rating

I/O MODULE OPTICAL

Type:Optically isolated I/O module
Channels:8–32 digital I/O channels
Data Rate:10/100 Mbps
Isolation Voltage:≥2500 V
Operating Temperature:-40°C to +70°C
Power Supply:24 V DC ±10%

CENTRAL PROCESSING MODULE

Operating Temp: -20°C to +60°C
Power Supply: 24 VDC ±10%
Memory: 512 MB–2 GB RAM

ANALOG OUTPUT MODULE

I/O LINK INTERFACE
FIBER OPTIC CONVERTER
9 PORTS
ANALOG OUTPUT MODULE

SYSTEM DC POWER SUPPLY M-SERIES

Input Rating :12 VDC at 13.8 A 24 VDC at 4.5 A 
Output Rating:5.1 VDC at 2.0 A 3.4 VDC at 2.0 A 
(40°C to +60°C):12 VDC at 13 A (12 VDC input)
Output Power:10.2 W (total from +5.1 VDC and+3.4 VDC)
Alarm ContactRating:30 VDC at 2.0 A
AmbientTemperature:-40°C to +60°C...+70°C
Shock :10g ½ Sinewave for 11msec 
Vibration: 1mm Peak to Peak from 2 to 13.2Hz;
0.7g from 13.2 to 150Hz 

AI 8 CH 4-20mA HART CARDSERIES 2

Local Bus Power:12 VDC at 150 mA
Bussed Field Power:24 VDC at 300 mA
Field Circuit: 24 VDC at 30 mA/Ch.
Ambient Temperature -40 °C to +70 °C
Shock 10 g half-sine wave for 11 ms
Vibration 1 mm peak to peak from 2 to 13.2Hz
0.7 g from 13.2 to 150 Hz
AirborneContaminantsISA-S71.04 –1985 
AirborneContaminants Class G3
Relative Humidity:5 to 95% Non-Condensing 

DI CARD 24V DRY CONTACT SERIES 2

Local Bus Power:12 VDC at 150 mA
Bussed Field Power:24 VDC at 100 mA
Field Circuit:24 VDC at 5 mA/Ch
Ambient Temperature -40 °C to +70 °C
Shock 10 g half-sine wave for 11 ms
Vibration 1 mm peak to peak from 2 to 13.2Hz
0.7 g from 13.2 to 150 Hz
AirborneContaminantsISA-S71.04 –1985 
AirborneContaminants Class G3
Relative Humidity:5 to 95% Non-Condensing 

Serial Interface Card

PROFIBUS DP CARD
SERIES 2 PLUS M-SERIES
Local Bus Power 12 VDC at 300 mA
AmbientTemperature-40°C to +70°C
Shock 10g ½ Sinewave for 11msec
Vibration 1mm Peak to Peak from 2 to 13.2Hz;
0.7g from 13.2 to 150Hz
AirborneContaminantsISA-S71.04 –1985 
AirborneContaminants Class G3
Relative Humidity Position5 to 95% Non-Condensing
Terminal Block key D4 

Profibus DP Interface Card

PROFIBUS DP CARD
SERIES 2 PLUS M-SERIES
Local Bus Power 12 VDC at 600 mA
AmbientTemperature-40°C to +70°C
Shock 10g ½ Sinewave for 11msec
Vibration 1mm Peak to Peak from 2 to 13.2Hz;
0.7g from 13.2 to 150Hz
AirborneContaminantsISA-S71.04 –1985 
AirborneContaminants Class G3
Relative Humidity:5 to 95% Non-Condensing 

Control board

Power Supply:24 V DC
Power consumption: < 3 W
Supports up to 64 modules
Operating Temperature:–25°C to +60°C
Humidity:≤ 95% (non-condensing)

VME BOARD

CPU BOARD MICROPROCESSOR
MVME162 SERIES
MC68040 25 MHZ CPU
4 MB
4 IP
SIO
E-NET
VME BOARD

1KHL015502R0004 N4BDTEBIT

Power Supply:24 V DC
Power consumption: < 3 W
Supports up to 64 modules 
Operating Temperature:–25°C to +60°C
Humidity:≤ 95% (non-condensing)

Coupler Module

Power Supply:24 V DC
Power consumption: < 3 W
Supports up to 64 modules 
Operating Temperature:–25°C to +60°C
Humidity:≤ 95% (non-condensing)

CONTROL CARD

Power Supply:24 V DC
Power consumption: < 3 W
Supports up to 64 modules 
Operating Temperature:–25°C to +60°C
Humidity:≤ 95% (non-condensing)

Coupler Module

Power Supply:24 V DC
Power consumption: < 3 W
Supports up to 64 modules 
Operating Temperature:–25°C to +60°C
Humidity:≤ 95% (non-condensing)

Power Supply Module

Output Voltage:24 V DC
Output Current:5 A continuous
Reinforced isolation :3000 V AC input-to-output
Input-to-ground:1500 V AC
Power Factor:≥ 0.95 
Operating Temperature:
–25°C to +70°C
Storage Temperature:
–40°C to +85°C

Power Supply Module

Output Voltage:24 V DC
Output Current:5 A continuous
Reinforced isolation :3000 V AC input-to-output
Input-to-ground:1500 V AC
Power Factor:≥ 0.95 
Operating Temperature:
–25°C to +70°C
Storage Temperature:
–40°C to +85°C

COBUX-HW INTERFACE CARD

Type: COBUX-HW Interface Card
Operating Voltage:24V DC
Operating Temperature Range:-20°C to +70°C
Storage Temperature Range:
-40°C to +85°C.
Analog inputs: 0–10 V, ±10 V, 4–20 mA 
Analog outputs: 0–10 V, 4–20 mA 

COBUX-HW INTERFACE CARD

Type: COBUX-HW Interface Card
Operating Voltage:24V DC
Operating Temperature Range:-20°C to +70°C
Storage Temperature Range:
-40°C to +85°C.
Analog inputs: 0–10 V, ±10 V, 4–20 mA 
Analog outputs: 0–10 V, 4–20 mA 

Control Main Module

Analog inputs: 0–10 V, 4–20 mA
Analog outputs: 0–10 V, 4–20 mA
Power Supply:24 V DC (±10%)
Operating temperature: –15°C to +50°C

Control Board

Power Supply:24 V DC 
Differential: ±12 V.
Power consumption: < 5 W
Single-ended: 0–24 V
Output Voltage:
TTL: 0–5 V.
HTL: 0–24 V