255 with K-bus extension
128 byte input and 128 byte output
automatic detection up to 12 Mbaud
1 x D-sub 9-pin socket with shielding
shielded copper cable, 2 x 0.25 mm²
24 V DC (-15%/+20%)
70 mA + (total K-bus current)/4, 500 mA max.
1750 mA
max. 24 V DC/max. 10 A
500 V (power contact/supply voltage/fieldbus)
-25…+60°C/-40…+85°C
SERVO MOTOR
KINETIX
LOW INERTIA
400V
130 MM
152.4 MM MAGNET STACK LENGTH
3000 RPM
1024 SIN/COS
SHAFT KEY
NO SHAFT SEAL
CIRCULAR (SPEEDTEC) DIN CONNECTOR
NO BRAKE
SERVO MOTOR
KINETIX
LOW INERTIA
400V
100 MM
50.8 MM MAGNET STACK LENGTH
5000 RPM
1024 SIN/COS
SHAFT KEY
NO SHAFT SEAL
CIRCULAR (SPEEDTEC) DIN CONNECTOR
NO BRAKE
MPLA310FHK22AA
DISCONTINUED BY MANUFACTURER
SERVO MOTOR
MP-SERIES
MAGNET ROTARY MOTOR
LOW INERTIA
100 MM FRAME
25.4 MM STACK LENGTH
240 V
3000 RPM
0.46 KW
3.61 NM
3.2 AMP
INCREMENTAL ENCODER
2000 LINES/REV
NO BRAKE
SIMATIC CPU 410-5H
Process Automation
central unit for S7-400 and S7-400H/F/FH
5 interfaces: 2x PN, 1x DP
2x for sync modules
for use as spare part
without System Expansion Card
Input Voltage:380-480VAC
Rated Current output:17.0 A
Rated Power:7.5 kW (10.0 HP)
Installation:Panel Mount
Enclosure Rating:IP20 / NEMA UL Type Open
Keypad:LED Keypad
Voltage:480 Volts AC
Enclosure:Panel Mount - IP20, NEMA/UL Type Open
Horsepower:10 Horsepower
Amperage:17.0 Amps
22AD6P0N104
AC DRIVE
POWERFLEX 4
480 VAC
3 PHASE
6 AMPS
2.2 KW
3 HP
FRAME SIZE B
IP20 (OPEN)
LED DISPLAY
FIXED DIGITAL KEYPAD
NO CE COMPLIANT FILTER
RS485
Country of Origin: China
Continuous Output Current (0-peak):3.5 A
Product Category:Kinetix 5500
Continuous Output Current (rms):2.5 A
Peak Output Current (0-peak):8.8 A
Peak Output Current (rms):6.25 A
Velocity Loop:300 Hz
Current Loop:1000 Hz
Efficiency:0.97
Short-circuit current rating:200,000 A (rms) symmetrical
Internal shunt power:30 W
Voltage:400V AC
Ph:3
Amps:1.3
kW(Hp):0.37 (0.5)
Frame:A
Communication Protocol :RIO / DH+
Data Rate:57.6 Kbps, 115.2 Kbps, or 230.4 Kbps
No. of connections:32 nodes
Drive Power consumption:250 mA at 5V DC supplied by the host drive
Operating Temperature:-10…50 °C (14…122 °F)
Storage:-40…85 °C (-40…185 °F)
Relative Humidity:5…95% non-condensing
SIMATIC DP
Connection ET 200M IM 153-2
High Feature for max.
12 S7-300 modules with redundancy capability
Timestamping suitable for isochronous mode
New features: up to 12 modules
can be used Slave INITIATIVE
for Drive ES and Switch ES
Expanded quantity structure for HART
auxiliary variables Operation of the
64-channel modules 32 signals/slot
Series:Ultra 3000 Drives
Module Type:Digital Servo Drive
Internal Shunt Resistance:N/A
Bus Capacitance:1880 ?F
Output Current (Intermittent):30 Amps (0-peak)
Output Current (Continuous) 10 Amps (0-peak)
Auxiliary Power Supply:No
Product Line:Ultra3000
Input Frequency (AC):47-63 Hz
Input Voltage (AC):100-240 Voltage (Single Phase)
Bus Overvoltage:400 Volts dc
Input Frequency:48…62 Hz
Main AC input current, Nom (rms):7.9 A
Main AC input current, Nom (0-pk):22.6 A
Control power back-up input voltage:20…26V DC
Control power back-up input current, nominal:500 mA
Control power back-up input current, max. inrush:30 A
Peak output current (0-pk):25.5 A
Continuous power output:3.00 kW
Continuous Output Current (0-peak):8.5 Amperes
Power Rating:3.0 kWatts
Product Bulletin:2097 Kinetix 300 Drives
Input Frequency:48…62 Hz
Main AC input current, Nom (rms):7.9 A
Max inrush:22.6 A
Drive Voltage:480 Volts
Continuous Output Current (0-peak):8.5 Amperes
Power Dissipation:99 Watts
Control power back-up input voltage:20…26V DC
Control power back-up input current, nominal:500 mA
Control power back-up input current, max. inrush:30 A
Continuous output current (rms):4.0 A
Continuous output current (0-pk):5.7 A
Peak output current (rms):12.0 A
Peak output current (0-pk):17.9 A
Continuous power output:1.0 kW
Overvoltage:430 VDC
Input Frequency:48…62 Hz
Continuous output current (rms):4.0 A
Continuous power output:1.00 kW
Update Rate:2.5/5.0 ms all channels
Conversion Type:Digital to Analog Converter
Resolution:15 bits plus sign
Product Description:Flex IO High Output Module
No. of outputs: Four (4) Isolated
Output type:4-20 mA, 0-20 mA and ±10VDC; 0-10VDC; +/- 5VDC and 0-5VDC
Voltage Resolution:0.320 mV/cnt
Current resolution:0.656 mA/cnt
Step response to 63% of full scale < 25 s
External DC supply, nom:24V DC
External DC supply range:19.2…31.2V DC (includes 5% AC ripple)
Mounting:DIN Rail
External DC supply, nom:24V DC
Operating Temperature:0 to 55 C (32 to 131 F)
Storage Temperature:–40…85 °C (–40…185 °F)
Vibration: 5g @ 10 to 500 Hz
Operating Shock:30 g
Thermal dissipation, max:6.8 BTU/hr @ 31.2V DC
Power dissipation, max:2.0 W @ 31.2V DC
Product Type:Flex I/O Isolated Input Analog Module
Inputs:4 Isolated
Resolution:16 bits
179132A0
DISCONTINUED BY MANUFACTURER 06/30/2015
BLOCK I/O INPUT MODULE
120V AC
32 POINT (32 INPUT)
PLC BLOCK I/O
.15AMP
120VAC
32 POINT MODULE (32 INPUT)
Tariff Code: 8538903000
Country of Origin: United States
