ALL MANUFACTURERS

Remote Controller Unit

Input supply voltage: 24 VDC(+30%, -25%)
Nominal current consumption: ≈ 0.8 A
Start-up current: Max. 2.7 A
Power consumption: Max. 20 W
Heat dissipation: Max. 20 W

Remote Controller Unit

REMOTE CONTROLLER UNIT
32 I/O CHANNELS
32-BIT CPU RUNNING AT 400 MHZ
16 MB FLASH MEMORY
24 VDC
400 MH
20 W
(601418)

Remote Control Unit

REMOTE CONTROLLER UNIT
32 I/O CHANNELS
32-BIT CPU RUNNING AT 400 MHZ
16 MB FLASH MEMORY
24 VDC
400 MH
20 W
(601418)

Remote DigitalInput/Output and relay

Input supply voltage: 24 VDC (18-31.2 V)
No. of I/O channels: 32
Loop voltage: Input supply voltage
Input loop current: Max. 4 mA @ 24 VDC loopvoltage
Channel "Off" current: < 0.5 mA
Channel "On" current: > 3 mA
Max. input voltage: Input supply voltage
Max. input signalfreq.: 10 ms pulses

Remote MultipurposeInput/Output

Voltage input range: 0-4 V, 0-10 V
Input resistor to ground: 3 MΩ
Current input range: 0-20 mA
Automatic protection: 26 m
AInput resistor to ground: 150 Ω ±1 %
Measurement accuracy: ±0.15% of full scale

Remote Controller unit

IACS E10
DnV GL 2.4
IEC 60945
RoHS Directive 2011/65/EU
EMC Directive 2014/30/EU
Input supply voltage: 24 VDC (+30%, -25%)
Nominal current consumption: Max. 0.75 A
Start-up current: Max. 2.8 A
Power consumption: Max. 20 W
Power connectors: Screw terminals (slotted)
Cable cs: 2.5 mm²

OIL MIST DETECTOR PCB BOARD

Input Voltage: 24V DC
Operating Temperature: -10°C to +60°C
Humidity: 5% to 95% relative humidity
VN 115/87 300 553/00 PCB board

MODULE RACK BACKPLANE

Power Input:  24V DC
Ethernet, CAN bus
Operating Temperature: -10°C to +60°C
19-inch rack mountin
DIN rail mounting

BRIDGE CONTROL SYSTEM

300V Class 2 Thin
22 and 24 AWG Stranded Tinned Copper
100% individually foil shielded 
+ overall 65% TC Braid
Drain Wire
PVC Insulation (Power)
FPE Insulation (data)
Lt Gray sunlight / oil resistant PVC jacket
Thin 75oC 

PC Board

Voltage Rating:  
5V DC to 24V DC
Operating Temperature: 
-20°C to +70°C

PCB CARD

Operating Voltage: 5V DC
Operating Temperature Range: 
0°C to 60°C (32°F to 140°F)
Storage Temperature Range: 
-20°C to 70°C (-4°F to 158°F)

Analog Board

Application: HVAC systems
Operating Voltage:  24V DC
Operating Temperature Range: 0°C to 60°C
Storage Temperature Range:  -20°C to 70°C

PC Printed Circuit Board

Series: MAK 9
Voltage Rating: Typically24V DC.
Operating Temperature Range:
0°C and 60°C(32°F to 140°F)
Storage Temperature Range:
-20°C and 70°C (-4°F to 158°F)

VOLTAGE INSERT CARD

Input Voltage Range: 24V DC
Output Voltage Range 24V DC, 48V DC
Operating Temperature Range
0°C to 60°C (32°F to 140°F)
Storage Temperature Range:
-20°C to 70°C (-4°F to 158°F).
Humidity Range:
5% to 95%, non-condensing.

Control Unit

Operating Voltage: 120/240 V AC
Input Power Frequency: 50/60 Hz
Input Voltage Range: 100–250 V AC
Operating Temperature Range: 
Typically 0°C to 50°C (32°F to 122°F)
Storage Temperature Range: 
-10°C to 60°C (14°F to 140°F)
Humidity Range: 
10% to 90% relative humidity (non-condensing)

Compact Air Leak Detector Tester

Differential pressure decay leak measurement
1 measurement range (ΔP) F.S. : 5000 Pa
32 programs
Languages (English + other one)
Electronical pressure regulator 4 MPa
Mechanical pressure regulator 8 MPa

Servo motor

Range Compatibility PacDrive 3
Maximum mechanical speed 4000 rpm
rated supply voltage 115...480 V
Phase Three phase
Continuous stall current 7.8 A
Continuous power 2900 W
Maximum current Irms 20.8 A

Servo motor

Range Compatibility PacDrive 3
Maximum mechanical speed 6000 rpm
rated supply voltage 115...480 V
Phase Three phase
Continuous stall current 3.5 A
Continuous power 1190 W
Maximum current Irms 12 A

Terminal Block

I/O TERMINAL BLOCK
24 VDC
2 AMP
Rated Voltage: 250 V AC/DC
Rated Current: 10 A
Solid wire: 0.2 to 4 mm² 
Stranded wire: 0.2 to 4 mm² 

Universal Safe IO IS Interfaces Module

USIO 16CH AI/AO/DI/DO FTA CC
Input Voltage: 24 V DC
Operating Temperature Range: 
-40°C to +70°C (-40°F to +158°F)
Certification: Ex ia IIC T4 

Tool Correction Control Unit

Input Voltage: 24 V DC ±10% or 120-240 V AC 
Power Consumption: Typically 20-30 watts
Operating Temperature Range: 0°C to 50°C (32°F to 122°F)
Storage Temperature: -20°C to 70°C (-4°F to 158°F)
Output: Analog (typically 4-20 mA)

Smart Pressure Transmitter

ST 3000 Smart Pressure Transmitter 
Series 900 Differential Pressure
Span : 0-10" to 0-400" H2O/0-25 to 0-1000 mbar
STD924 Body Rating: 3000 psi (210 bar)
E : Wetted process heads 
316 St. St, Vent/drain valves and plugs 
316 St. St., Barrier diaphragms 
316 LSS
Fill Fluid : 1 = Silicone

M-BUS External add-on module

M-Bus slave interface According to 
EN 1434-3 and EN 13757-2/-3
Quiescent current ≤ 1.5 mA
Standard load 1UL
Addressing Primary or secondary
Baud rate 300, 2400 Baud
Polarity AnyDC decoupling Through module interface
Length of connection cable 2.95 m

Pressure Sensor

Range of measurement: 
from 100N to 2kN
Accuracy class: 0.5%
Corrosion resistant
35MM BEARING
FLA 711

Servo motor

Range compatibility PacDrive 3
Product or componenttypeServo motor
Device short name SH3.....P
Maximum mechanical speed 8000 rpm
rated supply voltage 115...480 V
Network number of phases Three phase
Continuous stall current 1.8 A
Continuous power 690 W
Maximum current Irms 5.7 A
Shaft end Smooth shaft