
Analog Output module
No. of channels: 4 single-ended, one group
Voltage Range: 18 - 30 VDC
Current Range: 4 - 20 mA
Update Rate: 0.3 ms
LED Indicators: FLD PWR, OK
Power Consumption: 50 mA from +5V bus
Embedded Controller
Double-High VME Module
MC68LC040 or MC68040 Microprocessor
1MB, 4MB, or 8MB of Parity-Protected DRAM
512KB SRAM
PLC Board
Part Number: 08001-4247 01-W3726F 31A
Type: PLC Control Board
Manufacturer: Motorola (now part of Broadcom)
Functionality: This is a part of the Motorola 31A series of PLC board
Input/Output:
Digital I/O for controlling ON/OFF processes.
Analog I/O for monitoring and controlling processes requiring continuous measurement
I/O cable
Part Number: 4000094-316
Type: I/O Cable
Compatibility: Compatible with TRICONEX safety systems, typically used with I/O modules and other system components for data transmission.
High-quality insulation for protection against environmental factors.
Designed to withstand high temperatures, vibration, and harsh industrial environments.
Reliable performance for continuous monitoring and control in critical processes.
Digital Output Module
Operating Voltage:380V AC
Input Frequency:50/60Hz
Processing Speed:120 MIPS
Memory Capacity:1MB RAM, 16MB Flash
Communication Interfaces:Ethernet, DeviceNet, FF
SERIAL-ETHERNET/IP CONVERTER
Category : Networking Solutions Serial Device Servers
Manufacturer:HMS Networks
Type:Converter, Serial to Ethernet
RESOURCE TYPE:LINK
Datasheets :EtherNet/IP Installation Guide
CAD Models:AB7007-C Models
Converter Control Board
Converter Control Board
6U SINGLE SLOT VME SINGLE BOARD COMPUTER (SBC)
INTEL ULTRA LOW VOLTAGE CELERON PROCESSOR AT 400 MHZ OR 650 MHZ
Embedded Single Board
Up to 512MB PC100 SDRAM
(PC133 stepped down to 100 MHz)
Built-in SVGA support with 4 Mbytes DRAM display cache
Built-in dual 10/100 Mbit Ethernet
IDE drive support
Floppy drive support
Two RS232 serial ports
Dual USB ports
Real-Time clock/calendar
Front panel reset switch
Miniature speaker
Keyboard/Mouse port
CABLE COMMUNICATION - 100 FEET
NKCL01-100
Coax INFI-Net Comm Link - 100 Ft (Pvc)
Connect NTCL to NTCL, Must use with NKTL01
15240 mm
PLANT COMMUNICATION CBLE
NKCL01-50
Coax INFI-Net Comm Link - 50 Ft (Pvc)
Connect NTCL to NTCL, Must use with NKTL01
15240 mm
Programmable Automation Controller
10/100/1Gbps
0.6 MB Standard
1000 per task
32 Tasks
16 Ethernet/IP Nodes
Device Level Ring, Star, and Linear
Programmable Automation Controller
1 Megabytes
0.5 MB
2GB via 1784-SD2
31 Standard tasks; 1 Safety Task
8 I/O modules
10 Mbps / 100 Mbps / 1 Gbps
12 Mbps
256 Motion Axes
Programmable Automation Controller
16 Ethernet/IP Nodes
0.6 Megabytes
2GB via 1784-SD2 (ships with the controller)
8 I/O modules
10 Mbps / 100 Mbps / 1 Gbps
12 Mbps
256 Motion Axes
2 Motion Axes
Programmable Automation Controller
2 Megabytes
2 GB via 1784-SD2 (ships with the controller)
16 I/O modules
10 Mbps / 100 Mbps / 1 Gbps
12 Mbps
40 Ethernet/IP Nodes
16 I/O
Programmable Automation Controller
4 Megabytes
2 GB via 1784-SD2 (ships with the controller)
Device Level Ring, Star, and Linear
31 I/O modules
10 Mbps / 100 Mbps / 1 Gbps
Process Module
Programmable Automation Controller
Controller Tasks 32
Programs/task 1000
User Memory 2 MB
Ports 2 Ethernet
Port 1 USB
Network Nodes 40
Programmable Automation Controller
3 Megabytes
2 GB via 1784-SD2 (ships with the controller)
31 I/O modules
10 Mbps / 100 Mbps / 1 Gbps
12 Mbps
50 Ethernet/IP Nodes
31 I/O
Motion control
4 Megabytes
2 GB via 1784-SD2 (ships with the controller)
10 Mbps / 100 Mbps / 1 Gbps
31 I/O modules
12 Mbps
20 Motion Axes
55 Ethernet/IP Nodes
Programmable Automation Controller
180 Ethernet/IP Nodes
10 Megabytes
2GB via 1784-SD2 (ships with the controller)
8 I/O modules
10 Mbps / 100 Mbps / 1 Gbps
256 Motion Axes
31 I/O
32 Motion Axes
Safety Controller
10 Megabytes
2GB via 1784-SD2 (ships with the controller)
31 Standard tasks; 1 Safety Task
31 I/O modules
10 Mbps / 100 Mbps / 1 Gbps
256 Motion Axes
10 MB + 5 MB safety
Safety Controller
10 Megabytes
2GB via 1784-SD2 (ships with the controller)
31 Standard tasks; 1 Safety Task
31 I/O modules
10 Mbps / 100 Mbps / 1 Gbps
12 Mbps
256 Motion Axes
32 to 140 degrees Fahrenheit
-40 to 185 degrees Fahrenheit
STEAM TURBINE
TG Turbine Governor - TG-13 Screw Speed Setting, 12 ft-lb Output, 2400-4400 RPM, CW Features:
• Low cost
• Speed droop control
• Weatherproof
• Self-contained sump
• NEMA "A"
• 16 N?m (12 ft-lb) output
Low Level Analog Mux Module
Manufacturer : Honeywell
Product No. : 51309218-125
Product type : Low Level Analog Input Multiplexer RTD FTA
Not CE compliant, not conformally coated
Redundancy not supported
Input channels : 16
Teminals : compression
LLMux RTD FTA with compression terminals
Single IOP interface
Digital Input Power Module
Pulse Input FTA - MC-TPIX52
CE compliant, conformally coated
Use with IOP MU-PPIX02 or MC-PPIX02
Redundancy not supported
Input Points - 8
Terminals - Screw
Size B - 12 inches (307 mm)
Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.