ALL MANUFACTURERS

SINAMICS G120C PN 2,2KW UNFIL

Input Module

Input16 group isolated and independent channels
Input Range (each channel)0 to 20.4 mA DC (each channel current limited to33 mA)
Accuracy (includes linearity)±0.03% of span
Accuracy temperature coefficient: ±50 ppm/° C
Common Mode Rejection>100 db at 50 or 60 Hz
Normal Mode Rejection>35 db at 50 or 60 Hz
Input Channel Impedance61.9 Ω nominal
INPUT VOLTAGE RANGE (REDUNDANT)24 V DC +5%, -10%
CONSUMPTION7 W (maximum) at 24 V DC11 W (maximum) at 24 V DC with all inputs at20.4 mA (internal power)

High-Speed Counter Module

Brand:GE Intelligent Platforms/GE Fanuc
Series:Versamax
Part Number:IC200MDD841
Bulletin:IC200
Product Type:High-Speed Counter Module
Inputs:20
Outputs:12
Voltage:24 V DC
Current:30 mA
Backplane Power:5 V

SITOP PSU8200 Power Supply

SITOP PSU8200 
24 V/40 A stabilized 
power supply input: 120/230 V 
AC output: 24V DC/40 A

Digital Relay Output Module

3636T
DIGITAL RELAY OUTPUT MODULE
32 POINT
2 AMP
125 VAC/DC
1900 VDC POINT ISOLATION
NON-TRIPLICATED

FEEDER TERMINAL

Rated Voltage (Vn): 100/110V AC
Burden: <0.2 VA per phase
Rated Current (In): 1A or 5A
Burden: <0.1 VA per phase at In
Digital Inputs: 8–16 
Contact Rating: 5A @ 250V AC/DC
Power Consumption: <15W (typical)

SWITCH-DISCONNECTOR

3-pole
front operated
base mounted
DIN-rail mountable switch-diconnector
non-fusible diconnect switch 
with front protected clamp terminals
handle and shaft are not included

CONVERTER BOARD

IO BOARD
CONVERTER BOARD
DRIVE BOARD
Input Voltage Range: 200 V – 600 V DC
Output Voltages & Currents:
+15 V DC ± 5% at up to 3 A
+5 V DC ± 5% at up to 1 A
Isolation Voltage: ≥ 3 kVrms (input to outputs)
Conversion Efficiency: ≥ 85% typical at full load
Ripple & Noise: ≤ 100 mVp‑p on 15 V rail

Distributed Processing Unit

Input Voltage:24V DC
Power Consumption:10W
Clock Speed: 1 GHz to 2 GHz
Operating Temperature:-20°C to +60°C
Storage Temperature: -40°C to +85°C

Digital Output Module

3300 XL 11 mm Proximitor Sensor

51 5.0 meter (16.4 feet) systemlength
DIN mount
00 Not required

PEC80 Converter Signal Int

Input Voltage Range: 24V DC
Operating Voltage: 15–30V DC 
Current Consumption: 50–200 mA 
Isolation Voltage: ≥500V 
Analog inputs: ±10V, 4–20mA
Digital inputs :TTL/relay contact