Series:Versamax
Manufacturer:Emerson Automation / GE Fanuc (former)
Part Number:IC200ALG264
Series:VersaMax
Type:Input Module
Channels:15 single ended, one group
Wiring configuration:Single-ended
Isolation:250VAC continuous; 1500VAC for 1 minute
No. of groups:1 group
LED Indicators:Yes OK LED
Compatible signals:4 to 20 mA / 0 to 20 mA
Resolution:15 bit
Diagnostics:Yes
External Supply Voltage Range:None
Input Currents:1 to 20 mA
Input Impedance:100 ohms
Backplane current:100 mA
Update rate:7.5 ms, maximum
Accuracy:0.3% typical, 1% maximum
Resolution:15 Bits
Current Draw:100 mA, maximum
Output 12/24VDC POS LOGIC 0.5A per point (2 groups of 16) 32 points
No. of channels:Thirty-Two (32)
Current per Point:0.5 Amperes
Output Voltage Range:+10.2 to +30VDC
No. of input groups:Two (2)
Backplane Current:90 milliamperes
Output voltage, nominal:12 / 24VDC
No. of channel per group:Sixteen (16)
Current Draw:90 mA, maximum
External Power supply:+10.2 to +30VDC
Series:Series 90-30
Manufacturer:GE Fanuc
Part Number:IC693PBM200
Product Description:Profibus Master Module
Communication interface:One (1) RS232 Service port; One (1) Profibus Master Port
Communication protocol:ProfiBus
No. of supported DP slave:125
Data rates:All standard data rates
Input data:244 Bytes
Output data:244 Bytes
Current draw:450mA @ 5VDC
Product Lifecycle Status:Discontinued/Obsolete
Operating temperature:0 to 60 degrees Celsius
Product Description:Analog input module
Number of Inputs:8
No of Channels:Eight (8) analog input
Input Type:Single-Ended
Analog input signal:Analog input signal
LED Indicators:2 (The "OK" and the "INT PWR" LED
Analog input resolution:12 bits
Voltage Type:Unipolar or Bipolar
Brand:GE Fanuc
Series:Versamax
Part Number:IC200MDL742
Product Description:Discrete Output Module
Number of Points:16 Outputs
Number of groups:2
Point to Point Isolation:None
Series:Versamax
Part Number:IC200MDL241
Description:Discrete Input Module
Operating Voltage:240 Volts AC
Backplane Current Rating:110 milliamps
Maximum Response Time (On):1 Cycle
Built-in Power:Yes
Number of Inputs:16 Discrete Inputs
Group Isolation:Yes
ON state Voltage:15-30 VDC
Filter time:0 ms, 1.0 ms, 7.0ms
OFF state voltage:0-5 VDC
Backplane Current Consumption:5 Volts, 50 milliamps
OFF state current:0-0.5 mA
On-state current:2.0 - 5.5 mA
Product type:Discrete Input Module
No. of input groups:Four (4)
Number of Points:32 Inputs
Input signal, nominal:24 VDC
Series:ControlLogix
Part Number/Catalog No.:1756-L74
Non-volatile memory:1GB
No. of task:32
I-O Memory:0.98 MB
User Memory:16 MB
Maximum Digital I-O:128,000
Current Draw (1.2 Volts DC):5 milliamps
Current Draw (5.1 Volts):800 milliamps
Power Dissipation:2.5 Watts
6ES73211BH020AA0
INPUT MODULE
SIMATIC S7-300
DIGITAL
ISOLATED
16 POINT
1 X 20 POLE
24 VDC
REPLACES 6ES7321-1BH01-0AA0
Tariff Code: 8538908180
Country of Origin: Germany
Number of channels :4
Transfer rate:31.25 kbit/s
Port :9-pole SubD male RS-232, 115.2 kbit/s
Port :Ethernet 10BASE-T/100BASE-TX, TJ45
Transfer rates:10 Mbit/s or 100 Mbit/s (autosensing)
Storage temperature: −20° C ... +70° C
Operating temperature:0° C ... +55° C
Relative humidity :0% ... 95%, non-condensing
Series:SLC 500
Module Type:Power Supply
Input Voltage:120 to 220 Volts AC
Input Power:42 Watts
Inrush Current:20 Amps
Internal Current Capacity:2 A at 5V dc 0.46 A at 24V dc
Output Voltage Range:18 to 30 Volts DC
Backplane Current (5 Volts):2 Amps
Backplane Current (24 Volts):0.46 Amps
Frequency:47 to 63 Hertz
Location:1746 Chassis
Weight:2 pounds
SIMATIC S7-300 CPU 317-2 PN/DP
Central processing unit with 1 MB work memory
1st interface MPI/DP 12 Mbit/s
2nd interface Ethernet PROFINET
with 2-port switch
Micro Memory Card required
NTMP01
DISCONTINUED BY MANUFACTURER
PC BOARD
MULTI-FUNCTION PROCESSOR TERMINATION UNIT
WITH DC/DC CONVERTER
TWO RS-232-C SERIAL PORTS OR ONE RS-232-C PORT AND ONE RS-485 PORT
Country of Origin: United States
